CMakeLists.txt

cmake_minimum_required(VERSION 3.10.2)
cmake_policy(SET CMP0048 NEW) # `project()` command manages `VERSION` variables.
cmake_policy(SET CMP0087 NEW) # Allow generator expresssions in install(CODE)
set(CMAKE_CXX_STANDARD 20)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
# Do not enable compiler specific extensions, for eg on GCC use -std=c++1z (=c++17) and not -std=gnu++17
set(CMAKE_CXX_EXTENSIONS OFF)

# Use ccache if available, has to be before "project()"
find_program(CCACHE_PROGRAM NAMES ccache sccache)
if(CCACHE_PROGRAM)
  # Support: Unix Makefiles and Ninja only
  # RULE_LAUNCH_COMPILE is an internal variable and makes RC compilation fail on windows, hence why we use the C/CXX COMPILER_LAUNCHER instead
  message(STATUS "${CCACHE_PROGRAM} found and enabled")
  set(CMAKE_CXX_COMPILER_LAUNCHER ${CCACHE_PROGRAM} CACHE FILEPATH "CXX compiler cache used")
  set(CMAKE_C_COMPILER_LAUNCHER ${CCACHE_PROGRAM} CACHE FILEPATH "C compiler cache used")
endif()

project(OpenStudioApplication VERSION 1.12.0)

# Check system info globally so we can use it everywhere after: Has to be done before FindOpenStudioSDK.cmake
if(APPLE)
  # Looking at cmake source code OS_RELEASE is already set to the output of `sw_vers -productVersion` which is what we want
  cmake_host_system_information(RESULT OSX_VERSION QUERY OS_RELEASE)
  message("-- OS_RELEASE variable is set to: " ${OSX_VERSION})

  if(DEFINED XCODE_VERSION)
    if(XCODE_VERSION VERSION_LESS "13.0")
      message(FATAL_ERROR "The minimum required version of XCode for compiling OpenStudio is 13, however XCODE_VERSION is set to " ${XCODE_VERSION} ". Please upgrade XCode and try again.")
    endif()
  # When using a generator other than XCode, ${XCODE_VERSION} is not set. Verify that we have at least the minimum macOS version required for XCode 13
  elseif(OSX_VERSION VERSION_LESS "11.3")
    message(FATAL_ERROR "The minimum required version of XCode for compiling OpenStudio is 13, which requires macOS 11.3 or greater, however macOS version is set to " ${OSX_VERSION} ". Please upgrade macOS and XCode and try again.")
  endif()

  if(NOT CMAKE_OSX_DEPLOYMENT_TARGET STREQUAL "")
    if(CMAKE_OSX_DEPLOYMENT_TARGET VERSION_LESS "11.0")
      message(FATAL_ERROR "The minimum required target version for macOS is 11.0, however CMAKE_OSX_DEPLOYMENT_TARGET is set to ${CMAKE_OSX_DEPLOYMENT_TARGET}. Please set CMAKE_OSX_DEPLOYMENT_TARGET to 11.0 or greater and try again.")
    endif()

    message("Using CMAKE_OSX_DEPLOYMENT_TARGET=${CMAKE_OSX_DEPLOYMENT_TARGET}")
    set(OSX_VERSION "${CMAKE_OSX_DEPLOYMENT_TARGET}")
  endif()

  # The output is like 10.12.6 or 10.13, let's strip the end component if any
  string(REGEX REPLACE "^([0-9]+\\.[0-9]+)\\.?.*" "\\1" OSX_VERSION_MAJOR_MINOR ${OSX_VERSION})

  find_program(UNAME uname)
  execute_process(COMMAND ${UNAME} -m
    OUTPUT_VARIABLE ARCH
    OUTPUT_STRIP_TRAILING_WHITESPACE
  )

elseif(UNIX)
  # OS_RELEASE is the result of `uname -r` which is unhelpful (eg '5.4.0-42-generic')
  find_program(LSB_RELEASE lsb_release)
  # -rs outputs only version, e.g. 20.04
  execute_process(COMMAND ${LSB_RELEASE} -rs OUTPUT_VARIABLE LSB_RELEASE_VERSION_SHORT OUTPUT_STRIP_TRAILING_WHITESPACE)

  # -is outputs "Ubuntu" or "Fedora"
  execute_process(COMMAND ${LSB_RELEASE} -is OUTPUT_VARIABLE LSB_RELEASE_ID_SHORT OUTPUT_STRIP_TRAILING_WHITESPACE)

  find_program(UNAME uname)
  execute_process(COMMAND ${UNAME} -m
    OUTPUT_VARIABLE ARCH
    OUTPUT_STRIP_TRAILING_WHITESPACE
  )
  if (ARCH STREQUAL "aarch64")
    set(ARCH "arm64")
  endif()

endif()

# set openstudio_DIR to the directory that contains the openstudioConfig.cmake
# eg C:\src\OpenStudio\build-vs\_CPack_Packages\win64\ZIP\OpenStudio-3.0.0-rc2+ce27ae6b85-Windows\lib\cmake\openstudio
# Or it'll download a zip/tar.gz for you
include(FindOpenStudioSDK.cmake)

###############################################################################
#                                C O N A N                                    #
###############################################################################

find_package(Ruby)
message("Ruby_INCLUDE_DIRS=${Ruby_INCLUDE_DIRS}")
find_package(pugixml)
find_package(LibXslt)
find_package(libxml2)
find_package(jsoncpp)
find_package(fmt)
find_package(SQLite3)
find_package(cpprestsdk)
find_package(websocketpp)
find_package(Boost)
find_package(geographiclib)
find_package(SWIG 4.1.1 EXACT REQUIRED CONFIG)
message("SWIG_EXECUTABLE=${SWIG_EXECUTABLE}")
message("SWIG_DIR=${SWIG_DIR}")
find_package(TinyGLTF)
find_package(minizip)
find_package(OpenSSL)
find_package(ZLIB)
if(BUILD_TESTING)
  find_package(GTest)
endif()
if(BUILD_BENCHMARK)
  find_package(benchmark)
endif()

# A macro to find a conan related value especially when using multi-config builds (MSVC)
# But it also works with single-config builds
macro(FindValue ValueName)
  set(LocalVar "")
  set(LocalVar $<$<CONFIG:Debug>:${${ValueName}_DEBUG}>$<$<CONFIG:Release>:${${ValueName}_RELEASE}>$<$<CONFIG:RelWithDebInfo>:${${ValueName}_RELWITHDEBINFO}>$<$<CONFIG:MinSizeRel>:${${ValueName}_MINSIZEREL}>
  )
#  list(JOIN LocalVar "" LocalVar)
  string(STRIP ${LocalVar} LocalVar)
  set(CURRENT_${ValueName} $<IF:$<BOOL:${LocalVar}>,${LocalVar},${${ValueName}}>)
  # For debug purposes
  # message(STATUS "Found '${ValueName}' as '${CURRENT_${ValueName}}'")
endmacro()

###############################################################################

# The PROJECT_SOURCE_DIR here is OpenStudioApplication/, which we will use instead of using CMAKE_SOURCE_DIR
set(PROJECT_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}")
# We will use BINARY_DIR instead of CMAKE_BINARY_DIR
set(PROJECT_BINARY_DIR "${CMAKE_BINARY_DIR}")

#MESSAGE(FATAL_ERROR "CMAKE_CURRENT_SOURCE_DIR=${CMAKE_CURRENT_SOURCE_DIR}, BINARY_DIR=${BINARY_DIR}, PROJECT_SOURCE_DIR=${PROJECT_SOURCE_DIR}, CMAKE_SOURCE_DIR=${CMAKE_SOURCE_DIR}, CMAKE_BINARY_DIR=${CMAKE_BINARY_DIR}")

# Set a default build type if none was specified
if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
  message(STATUS "Setting build type to 'Release' as none was specified.")
  set(CMAKE_BUILD_TYPE Release CACHE STRING "Choose the type of build." FORCE)
  # Set the possible values of build type for cmake-gui
  set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug" "Release"
    "MinSizeRel" "RelWithDebInfo")
endif()

if ( APPLE )
  find_library(SECURITY_FRAMEWORK Security)
endif()

include(ExternalProject)
include(CPackComponent)
include(CheckCXXCompilerFlag)

if(POLICY CMP0020)
  cmake_policy(SET CMP0020 NEW)
endif()
if(POLICY CMP0022)
  cmake_policy(SET CMP0022 NEW)
endif()
if(POLICY CMP0042)
  cmake_policy(SET CMP0042 NEW)
endif()
if(POLICY CMP0054)
  cmake_policy(SET CMP0054 NEW)
endif()
if(POLICY CMP0077)
  cmake_policy(SET CMP0077 NEW)
endif()

if(BUILD_MICRO_PROFILING)
  if(MSVC)
    # Install micro-profiler extension https://github.com/tyoma/micro-profiler
    # Locate micro-profiler_x64.lib under %LocalAppData%\Microsoft\VisualStudio\<Visual Studio version>\Extensions\
    # Copy dbghelp_x64.dll from extension into directory containing executable to profile
    find_library(MICRO_PROFILER_LIB micro-profiler_x64)
  endif()
endif()

###############################################################################
#                                  N I N J A                                  #
###############################################################################
# Ninja support: has to be atop for it to take effect before anything else is done
# Add Color Output if Using Ninja
macro(AddCXXFlagIfSupported flag test)
  CHECK_CXX_COMPILER_FLAG(${flag} ${test})
  if(${${test}})
    message("adding ${flag}")
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${flag}")
  endif()
endmacro()

if("Ninja" STREQUAL ${CMAKE_GENERATOR})
  # Will be passed to OpenStudio.in to deal with the Win32 case
  set(NINJA TRUE)

  # Clang
  if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
    AddCXXFlagIfSupported(-fcolor-diagnostics COMPILER_SUPPORTS_fcolor-diagnostics)
  endif()

  # g++
  if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
    # For some reason it doesn't say its supported, but it works...
    # AddCXXFlagIfSupported(-fdiagnostics-color COMPILER_SUPPORTS_fdiagnostics-color)
    message(STATUS "Ninja: Forcing -fdiagnostics-color=always")
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -fdiagnostics-color=always")
  endif()
endif()

# Xcode/Ninja generators undefined MAKE
if(CMAKE_GENERATOR MATCHES "Make")
  set(MAKE "$(MAKE)")
else()
  set(MAKE make)
endif()


###############################################################################
#                       P R O J E C T    V E R S I O N                        #
###############################################################################
# Project version information

set(PROJECT_VERSION_BUILD "Unknown" CACHE STRING "Build number") # git sha
find_package(Git)

if(NOT GIT_FOUND)
  find_program(GIT_EXECUTABLE git HINTS "$ENV{LOCALAPPDATA}/Programs/git/bin" "C:/Program Files/Git/bin")
  if(NOT GIT_EXECUTABLE_NOTFOUND)
    set(GIT_FOUND TRUE)
  endif()
endif()

if(GIT_FOUND)
  # Git SHA (length 10)
  execute_process(COMMAND "${GIT_EXECUTABLE}" "rev-parse" "--short=10" "HEAD"
                  WORKING_DIRECTORY "${PROJECT_SOURCE_DIR}"
                  TIMEOUT 10
                  RESULT_VARIABLE RESULT
                  OUTPUT_VARIABLE GIT_VERSION
                  ERROR_QUIET
                  OUTPUT_STRIP_TRAILING_WHITESPACE)
  if(${RESULT} EQUAL 0 AND NOT "${GIT_VERSION}" EQUAL "${PROJECT_VERSION_BUILD}")
    set(PROJECT_VERSION_BUILD ${GIT_VERSION} CACHE STRING "Build number" FORCE) # git sha
  endif()

  # Git branch name
  execute_process(COMMAND "${GIT_EXECUTABLE}" "rev-parse" "--abbrev-ref" "HEAD"
                  WORKING_DIRECTORY "${PROJECT_SOURCE_DIR}"
                  TIMEOUT 10
                  RESULT_VARIABLE RESULT
                  OUTPUT_VARIABLE GIT_BRANCH
                  ERROR_QUIET
                  OUTPUT_STRIP_TRAILING_WHITESPACE)
  if(${RESULT} EQUAL 0 AND NOT "${GIT_BRANCH}" EQUAL "${PROJECT_GIT_BRANCH}")
    set(PROJECT_GIT_BRANCH ${GIT_BRANCH} CACHE STRING "Git Branch Name" FORCE)
  endif()

  get_filename_component(GIT_DIR "${GIT_EXECUTABLE}" DIRECTORY)
else()
  set(GIT_DIR "")
endif()

#find_program(PATCH_EXE patch HINTS "${GIT_DIR}" "${GIT_DIR}/../bin/" "${GIT_DIR}/../usr/bin/")
#string(COMPARE EQUAL "${PATCH_EXE}" "PATCH_EXE-NOTFOUND" PATCH_EXE_NOTFOUND)
#if(PATCH_EXE_NOTFOUND)
  #message(SEND_ERROR "Required program patch not found")
#endif()

# README: what's the difference between all these versions?

# The "OpenStudioApplicaton_VERSION" ones should be used in CMakeLists.txt
# * OpenStudioApplicaton_VERSION: includes the prerelease tag if any: '1.1.0-rc1'
# * OpenStudioApplicaton_VERSION_PATCH: Patch + prelrease tag if any: '0-rc1'

# The "OPENSTUDIOAPPLICATION_VERSION" ones should only be used in manifests files (aside from using the the long version for naming the installer)
# * OPENSTUDIOAPPLICATION_VERSION: just major.minor.patch: '1.1.0'
# * OPENSTUDIO_LONG_VERSION: includes prelrease and build sha: "1.1.0-rc1+ejfbxhza'

# TODO: Modify the more specific variables as needed to indicate prerelease, etc
# Keep in beta in-between release cycles. Set to empty string (or comment out) for official)
set(PROJECT_VERSION_PRERELEASE "beta")

# OpenStudio version: Only include Major.Minor.Patch, eg "3.0.0", even if you have a prerelease tag
set(OPENSTUDIOAPPLICATION_VERSION "${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}")

if (NOT "${PROJECT_VERSION_PRERELEASE}" STREQUAL "")
  message(STATUS "We have a prerelease tag set to '${PROJECT_VERSION_PRERELEASE}'")
  if("${PROJECT_GIT_BRANCH}" STREQUAL "master")
    message(AUTHOR_WARNING "You are building branch 'master', perhaps you shouldn't have included a pre-release tag")
  endif()
  string(APPEND OpenStudioApplication_VERSION "-${PROJECT_VERSION_PRERELEASE}")
  string(APPEND OpenStudioApplication_VERSION_PATCH "-${PROJECT_VERSION_PRERELEASE}")
  # Long version, include prerelease and build metadata. eg '1.1.0-rc1+6383a191dc'
  set(OPENSTUDIOAPPLICATION_LONG_VERSION "${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}-${PROJECT_VERSION_PRERELEASE}+${PROJECT_VERSION_BUILD}")
else()
  message(STATUS "We do not have a prerelease tag")
  if(NOT "${PROJECT_GIT_BRANCH}" STREQUAL "master")
    message(AUTHOR_WARNING "You are building another branch than master but you do not have a prerelease tag, consider adding one such as 'beta'")
  endif()
  # Long version, include build metadata. eg '3.0.0+6383a191dc' for an official release
  set(OPENSTUDIOAPPLICATION_LONG_VERSION "${PROJECT_VERSION_MAJOR}.${PROJECT_VERSION_MINOR}.${PROJECT_VERSION_PATCH}+${PROJECT_VERSION_BUILD}")
endif()

###############################################################################
#                         B U I L D    O P T I O N S                          #
###############################################################################

if(UNIX AND NOT APPLE)
  # the RPATH to be used when installing
  set(CMAKE_INSTALL_RPATH "$ORIGIN")
endif()

option(BUILD_PACKAGE "Build package" OFF)

option(BUILD_TESTING "Build testing" OFF)

option(BUILD_BENCHMARK "Build benchmarking targets" OFF)

option(BUILD_MICRO_PROFILING "Build micro profiling" OFF)

if(APPLE)

  include(${CMAKE_CURRENT_LIST_DIR}/CMake/CodeSigning.cmake)

  # Defines CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION and CPACK_CODESIGNING_NOTARY_PROFILE_NAME
  setup_macos_codesigning_variables()

endif()

# DView
# option(BUILD_DVIEW "Build DView" OFF)

###############################################################################
#                         C M A K E    C O N T R O L                          #
###############################################################################

# High level project configuration
# Do we actually want everything to go to CMAKE_BINARY_DIR/Products,
# so that when you build OpenStudioApplication you get both OpenStudio (core) and Application in the same place?
set(CMAKE_LIBRARY_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}/Products")
set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}/Products")
set(CMAKE_RUNTIME_OUTPUT_DIRECTORY "${PROJECT_BINARY_DIR}/Products")

set(LIBRARY_SEARCH_DIRECTORY "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}" "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/Release" "${CMAKE_LIBRARY_OUTPUT_DIRECTORY}/Debug")

set(LIB_DESTINATION_DIR lib)
if(WIN32)
  # Windows does not have RPATH handling, so we just put everything next to the CLI in the bin/ folder
  set(LIB_DESTINATION_DIR bin)
endif()

# TODO: move App macros to a local ProjectMacros.cmake
# Include project specific macros
include("${PROJECT_SOURCE_DIR}/ProjectMacros.cmake")


# Search first in the binary dir, where conan will install finders, then
# search for modules in the root dir to override cmake ones
# Start with ROOT, then PROJECT_BINARY_DIR
list(APPEND CMAKE_MODULE_PATH "${CMAKE_BINARY_DIR} ${PROJECT_BINARY_DIR}" "${PROJECT_SOURCE_DIR}/CMake")

# Use CTest
set(ALL_TESTING_TARGETS "") # global list
if(BUILD_TESTING)
  enable_testing()
  include(CTest)
  include(GoogleTest)
endif()


###############################################################################
#          C O M P I L E R    A N D    S Y S T E M    O P T I O N S           #
###############################################################################
# Compiler and system specific options

if(MSVC AND NOT NINJA)
  # Build with Multiple Processes
  set(BUILD_WITH_MULTIPLE_PROCESSES ON CACHE BOOL "/MP compiler flag for full processor utilization")
  mark_as_advanced(BUILD_WITH_MULTIPLE_PROCESSES)
endif()


if(UNIX)

  # TODO: enable Wall
  #set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -fPIC -fno-strict-aliasing")
  set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -fPIC -fno-strict-aliasing")

  # all warnings
  #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -fPIC -fno-strict-aliasing -Winvalid-pch -Wnon-virtual-dtor")
  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}  -fPIC -fno-strict-aliasing -Winvalid-pch")
  # Treat all warnings as errors
  #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Werror")
  if(APPLE)
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-overloaded-virtual -ftemplate-depth=1024")

    # TODO: remove when bumping Boost to 1.81+, cf https://github.com/NREL/OpenStudio/issues/4978
    add_definitions(-DBOOST_NO_CXX98_FUNCTION_BASE)
    add_definitions(-D_HAS_AUTO_PTR_ETC=0)
  else()
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-overloaded-virtual")
    # DLM: had to add this due to issues with boost optional and gcc, may be resolved if we move to std::optional
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-maybe-uninitialized")
  endif()

  # Note: CMAKE_CXX_STANDARD (with no extensions) already sets -std=c++17 (or std=c++1z).
  if(APPLE)
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
    # TODO: workaround for #5398, remove when updating boost
    AddCXXFlagIfSupported(-Wno-enum-constexpr-conversion COMPILER_SUPPORTS_enum_constexpr_conversion) # Clang 16.0+ and Apple Clang 15+ only
    set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-deprecated-declarations")
  endif()
endif()

if(MINGW)
  # all warnings
  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall")
  # effective c++
  #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Weffc++")
  # treat warnings as errors
  #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Werror")

  # wchar not supported for MinGW
  #add_definitions(-DBOOST_LOG_USE_CHAR)
  #add_definitions(-DBOOST_LOG_NO_COMPILER_TLS)
endif()

if(MSVC)
  # warning level 3
  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W3")

  # warning level 4 - DLM: we should shoot for this
  #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /W4")

  # all warnings - DLM: probably too high to ever use
  #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /Wall")

  # needed for compiling with Qt6
  set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /Zc:__cplusplus /permissive-")

  # create compiler processes on all effective processors
  # /MP is useless for ninja and will cause problems. BUILD_WITH_MULTIPLE_PROCESSES shouldn't have been set if ninja but let's be safe
  if(BUILD_WITH_MULTIPLE_PROCESSES AND NOT NINJA)
    add_definitions(/MP)
  endif()

  # Enable warning on thread un-safe static member initialization - DLM: we have been bit by this many times
  # TODO: JM 2019-09-19: Disabling for now
  # Using the righg flag (/w14460 and not the previously mispelled /w44640) will make compilation fail with many warnings treated as error,
  # eg: IddRegex.cpp all scoped `const static std::string result` inside functions will issue that and make it fatal
  # add_definitions(/w14640)

  # ignore decorated name length exceeded
  add_definitions(/wd4503)

  # ignore needs to have dll-interface to be used by clients of class
  # we will not rely on exporting templates instead all libraries must
  # be linked against the same runtime
  add_definitions(/wd4251)

  # ignore base class not dll-exported error
  add_definitions(/wd4275)

  add_definitions(/bigobj)

  if(CMAKE_CL_64)
    # ignore conversion from size_t to int for now
    add_definitions(/wd4267)
  endif()

  # treat warnings as errors
  # DLM: only do this for our code, added in later
  # add_definitions(/WX)

  # ignore warnings about the stl being insecure
  add_definitions(-D_CRT_SECURE_NO_WARNINGS -D_SCL_SECURE_NO_WARNINGS)

  # ignore c++17 deprecation warnings generated by boost
  add_definitions(-D_SILENCE_ALL_CXX17_DEPRECATION_WARNINGS)
  add_definitions(-D_SILENCE_FPOS_SEEKPOS_DEPRECATION_WARNING)

  # for profiling with micro-profiler
  if(BUILD_MICRO_PROFILING)
    add_definitions(/GH /Gh /Zi)
    set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /DEBUG /OPT:REF /OPT:ICF")
  endif()

endif()

if(WIN32)
  add_definitions(-DNOMINMAX)
  # Set the BOOST_USE_WINAPI_VERSION to Windows10
  add_compile_definitions(BOOST_USE_WINAPI_VERSION=BOOST_WINAPI_VERSION_WIN7)
  # This will also align _WIN32_WINNT and WINVER
  # add_compile_definitions(BOOST_USE_WINDOWS_H) # Getting a confict with `typedef GUID UUID` from windows.h
  add_compile_definitions(BOOST_WINAPI_DEFINE_VERSION_MACROS)
  add_compile_definitions(WIN32_LEAN_AND_MEAN) # That excludes stuff that's not used too often, including the GUID stuff
  # TODO: remove when possible, see https://github.com/microsoft/cpprestsdk/issues/1768
  add_compile_definitions(_SILENCE_STDEXT_ARR_ITERS_DEPRECATION_WARNING)
endif()

# Check version of gcc
if(CMAKE_COMPILER_IS_GNUCC)
  execute_process(COMMAND ${CMAKE_C_COMPILER} -dumpversion
                  OUTPUT_VARIABLE GCC_VERSION)
endif()

# compiler id for about boxes
if(MSVC)
  set(ABOUT_COMPILER "${CMAKE_GENERATOR}")
elseif(APPLE)
  set(ABOUT_COMPILER "${CMAKE_CXX_COMPILER_ID} ${CMAKE_OSX_ARCHITECTURES}")
else()
  set(ABOUT_COMPILER "${CMAKE_CXX_COMPILER_ID}")
endif()

###############################################################################
#                           D E P E N D E N C I E S                           #
###############################################################################

# Required dependencies

# Threading library
find_package(Threads)
if(UNIX)
  set(CMAKE_THREAD_LIBS "${CMAKE_THREAD_LIBS_INIT}" CACHE STRING "Thread library used.")
  mark_as_advanced(CMAKE_THREAD_LIBS)
endif()

# Qt
# e.g. QT_INSTALL_DIR = C:/Qt/6.11.0/msvc2019_64
set(QT_INSTALL_DIR "" CACHE PATH "Path to Qt Install")
set(QT_VERSION "6.11.0" CACHE STRING "Qt target version, defaults to 6.11.0")

# For AboutBox, but also validates that the version is valid
string(TIMESTAMP CURRENT_YEAR "%Y")
string(REGEX MATCH "^([0-9]+\\.[0-9]+)"
  QT_VERSION_MAJOR_MINOR ${QT_VERSION})
if(NOT QT_VERSION_MAJOR_MINOR)
  message(FATAL_ERROR "Failed to match QT_VERSION=${QT_VERSION}")
endif()
set(QT_DOC_LINK "https://doc.qt.io/qt-${QT_VERSION_MAJOR_MINOR}/qtmodules.html")


# TODO: how to set OPENSSL_ROOT_DIR to a generator expression?
set(OPENSSL_ROOT_DIR ${CONAN_OPENSSL_ROOT_RELEASE})
message(STATUS "OPENSSL_ROOT_DIR=${OPENSSL_ROOT_DIR}")

message(STATUS "QT_INSTALL_DIR=${QT_INSTALL_DIR}")

find_package(Qt6 ${QT_VERSION} COMPONENTS CoreTools GuiTools WidgetsTools QmlTools WebEngineCoreTools REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)

find_package(Qt6 ${QT_VERSION} COMPONENTS Core Gui Widgets Sql Svg Network Xml Concurrent PrintSupport Quick QuickWidgets Qml WebChannel Positioning WebEngineCore WebEngineWidgets Charts REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)

find_package(Qt6LinguistTools ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)

if(APPLE)
  set(QtWebEngineProcess "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Helpers/QtWebEngineProcess.app" CACHE PATH "Path to the QtWebEngineProcess")
else()
  find_program(QtWebEngineProcess NAMES QtWebEngineProcess PATHS "${QT_INSTALL_DIR}/bin/" "${QT_INSTALL_DIR}/libexec/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Helpers" NO_DEFAULT_PATH)
endif()
find_file(icudtl NAMES icudtl.dat PATHS "${QT_INSTALL_DIR}/resources/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Resources" NO_DEFAULT_PATH)
find_file(qweb_resources NAMES qtwebengine_resources.pak PATHS "${QT_INSTALL_DIR}/resources/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Resources" NO_DEFAULT_PATH)
find_file(qweb_resources_devtools NAMES qtwebengine_devtools_resources.pak PATHS "${QT_INSTALL_DIR}/resources/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Resources" NO_DEFAULT_PATH)
find_file(qweb_resources_100 NAMES qtwebengine_resources_100p.pak PATHS "${QT_INSTALL_DIR}/resources/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Resources" NO_DEFAULT_PATH)
find_file(qweb_resources_200 NAMES qtwebengine_resources_200p.pak PATHS "${QT_INSTALL_DIR}/resources/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Resources" NO_DEFAULT_PATH)
find_file(qweb_resources_v8_context_snapshot NAMES v8_context_snapshot.bin PATHS "${QT_INSTALL_DIR}/resources/" "${QT_INSTALL_DIR}/lib/QtWebEngineCore.framework/Resources" NO_DEFAULT_PATH)

# QT_WEB_LIBS are linked by OS App and openstudio_lib but not by openstudio_modeleditor.so or openstudio_modeleditor
list(APPEND QT_WEB_LIBS Qt6::WebEngineCore)
list(APPEND QT_WEB_LIBS Qt6::WebEngineWidgets)
list(APPEND QT_WEB_LIBS Qt6::Charts)
list(APPEND QT_WEB_LIBS Qt6::WebChannel)
set_target_properties(${QT_WEB_LIBS} PROPERTIES INTERFACE_LINK_LIBRARIES "")

if(NOT APPLE)

    find_package(Qt6Quick ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    list(APPEND QT_WEB_LIBS Qt6::Quick)

    find_package(Qt6QuickWidgets ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    list(APPEND QT_WEB_LIBS Qt6::QuickWidgets)

    find_package(Qt6Qml ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    list(APPEND QT_WEB_LIBS Qt6::Qml)

    find_package(Qt6QmlModels ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    list(APPEND QT_WEB_LIBS Qt6::QmlModels)

    # Qt 6.11+ splits QmlMeta and QmlWorkerScript into their own libraries (required by QtWebEngineProcess)
    find_package(Qt6QmlMeta ${QT_VERSION} QUIET PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    if(Qt6QmlMeta_FOUND)
      list(APPEND QT_WEB_LIBS Qt6::QmlMeta)
    endif()

    find_package(Qt6QmlWorkerScript ${QT_VERSION} QUIET PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    if(Qt6QmlWorkerScript_FOUND)
      list(APPEND QT_WEB_LIBS Qt6::QmlWorkerScript)
    endif()

    find_package(Qt6Positioning ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
    list(APPEND QT_WEB_LIBS Qt6::Positioning)

    if(UNIX)
      find_package(Qt6DBus ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
      list(APPEND QT_LIBS Qt6::DBus)

      find_library(QT_QXCBQPA NAMES libQt6XcbQpa.so.${QT_VERSION} PATHS "${QT_INSTALL_DIR}/lib" NO_DEFAULT_PATH)

      set(QT_ICU_LIBS
        "${QT_INSTALL_DIR}/lib/libicui18n.so.73.2"
        "${QT_INSTALL_DIR}/lib/libicuuc.so.73.2"
        "${QT_INSTALL_DIR}/lib/libicudata.so.73.2"
      )
      # Ensure each ICU library exists
      foreach(lib IN LISTS QT_ICU_LIBS)
        if(NOT EXISTS "${lib}")
          message(FATAL_ERROR "Qt ICU library not found: ${lib}")
        elseif(IS_SYMLINK "${lib}")
          message(FATAL_ERROR "Qt ICU library is a symlink, expected a real file: ${lib}")
        endif()
      endforeach()

      list(APPEND QT_EXTRA_LIBS ${QT_QXCBQPA} ${QT_ICU_LIBS})
    endif()
endif()

if(APPLE)
  find_package(Qt6DBus ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
  list(APPEND QT_LIBS Qt6::DBus)

  find_program(QT_MACDEPLOY_QT NAMES macdeployqt PATHS "${QT_INSTALL_DIR}/bin" NO_DEFAULT_PATH)
endif()

# QT_LIBS are linked by OS App and by openstudio_modeleditor.so
list(APPEND QT_LIBS Qt6::Core)
list(APPEND QT_LIBS Qt6::Widgets)
list(APPEND QT_LIBS Qt6::Network)
list(APPEND QT_LIBS Qt6::Xml)
list(APPEND QT_LIBS Qt6::PrintSupport)
list(APPEND QT_LIBS Qt6::Gui)
list(APPEND QT_LIBS Qt6::Svg)

if(WIN32)
  find_package(Qt6OpenGL ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
  list(APPEND QT_LIBS Qt6::OpenGL)
  list(APPEND QT_LIBS Qt6::OpenGLWidgets)

  find_program(QT_WINDEPLOY_QT NAMES windeployqt.exe PATHS "${QT_INSTALL_DIR}/bin" NO_DEFAULT_PATH)

  find_library(QT_ENTRYPOINT_LIB NAMES Qt6EntryPoint PATHS "${QT_INSTALL_DIR}/lib" NO_DEFAULT_PATH)
  find_library(QT_ENTRYPOINT_LIB_D NAMES Qt6EntryPointd PATHS "${QT_INSTALL_DIR}/lib" NO_DEFAULT_PATH)
endif()

if(UNIX AND NOT APPLE)
  # Apparently libqxcb.so depends on libQt6OpenGL.so in Qt 6 (it depended on libGL on 5.15.0 but not OpenGL)
  find_package(Qt6OpenGL ${QT_VERSION} REQUIRED PATHS ${QT_INSTALL_DIR} NO_DEFAULT_PATH)
  list(APPEND QT_LIBS Qt6::OpenGL)
endif()

list(APPEND QT_INCLUDES ${Qt6Core_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6Concurrent_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6Widgets_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6Xml_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6Network_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6Gui_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6PrintSupport_INCLUDE_DIRS})

# DLM: added this, but seems to conflict with idea of a separate set of Qt Web dependencies?
list(APPEND QT_INCLUDES ${Qt6Network_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6WebEngine_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6WebEngineCore_INCLUDE_DIRS})
list(APPEND QT_INCLUDES ${Qt6WebEngineWidgets_INCLUDE_DIRS})

if(UNIX)
  list(APPEND QT_INCLUDES ${Qt6XcbQpa_INCLUDE_DIRS})
endif()

set(CMAKE_AUTOMOC OFF)

include(FetchContent)

FetchContent_Declare(
  openstudio-coalition-measures
  GIT_REPOSITORY https://github.com/openstudiocoalition/openstudio-coalition-measures.git
  GIT_TAG        da6832b3eec8e3ecccaadd39142e7c3d9c2da10f # release-1.8.0
)

FetchContent_MakeAvailable(openstudio-coalition-measures)

###############################################################################
#                         I N C L U D E    P A T H S                          #
###############################################################################
# Add to include path

# Project source directory
include_directories("${PROJECT_SOURCE_DIR}/")
include_directories("${PROJECT_SOURCE_DIR}/src/")

# Project binary directory
include_directories("${PROJECT_BINARY_DIR}/")
include_directories("${PROJECT_BINARY_DIR}/src/")

###############################################################################
#                         S U B D I R E C T O R I E S                         #
###############################################################################
# Add project sub directories

if(MSVC)
  # treat warnings as errors
  add_definitions(/WX)
else()
  add_definitions(-Werror)
endif()

###############################################################################
#                                T A R G E T S                                #
###############################################################################

# The openstudio::openstudio target (which is the cli) includes a version string
# in the file name. We don't want that degree of coupling between app and sdk
# (we want the app to be able to use different sdk version without recompile,
# so this project (the app) will install and identify the cli generically as
# openstudio or openstudio.exe on windows. The OS_CLI_IMPORTED_PATH/OS_CLI_IMPORTED_NAME is configured
# into the utilities target so we need to set it before the utilities target is defined
# TODO: This isn't the case anymore, the openstudio(.exe) doesn't include a version in there
get_target_property(OS_CLI_IMPORTED_PATH openstudio::openstudio LOCATION)
# set(OS_CLI_IMPORTED_NAME "openstudio${CMAKE_EXECUTABLE_SUFFIX}")
get_filename_component(OS_CLI_IMPORTED_NAME ${OS_CLI_IMPORTED_PATH} NAME)

list(APPEND project_directories "utilities")
list(APPEND project_directories "model_editor")
list(APPEND project_directories "bimserver")
list(APPEND project_directories "openstudio_lib")
list(APPEND project_directories "openstudio_app")

foreach(D ${project_directories})
  add_subdirectory(src/${D})
endforeach()

add_subdirectory("ruby")
# Must be last in line, as it parses the sources files for the targets above
add_subdirectory("translations")

###############################################################################
#                        E X P O R T    T A R G E T S                         #
###############################################################################

list(APPEND all_lib_targets "openstudio_modeleditor")
list(APPEND all_lib_targets "openstudio_bimserver")
list(APPEND all_lib_targets "openstudio_lib")

list(APPEND all_exe_targets "OpenStudioApp")

if(UNIX AND NOT APPLE)
  foreach(targ ${all_lib_targets} ${all_exe_targets} ${ALL_TESTING_TARGETS})
    set_target_properties(${targ} PROPERTIES
      #ARCHIVE_OUTPUT_DIRECTORY "${PROJECT_ARCHIVE_OUTPUT_DIRECTORY}"
      #LIBRARY_OUTPUT_DIRECTORY "${PROJECT_LIBRARY_OUTPUT_DIRECTORY}"
      #RUNTIME_OUTPUT_DIRECTORY "${PROJECT_RUNTIME_OUTPUT_DIRECTORY}"
      VERSION ${OpenStudioApplication_VERSION}
    )
  #target_include_directories(${targ} PUBLIC openstudio)
  endforeach()
endif()


##########################################################   S Y S T E M    L I B R A R I E S   ######################################################

# Add compiler-provided system runtime libraries
if( NOT UNIX )
  # Skip the call to install(PROGRAMS) so we can specify our own install rule (using the value of `CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS`)
  set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP TRUE)

  # Set to TRUE to install the Windows Universal CRT libraries for app-local deployment.
  # This is meaningful only with MSVC from Visual Studio 2015 or higher, which is our case
  #SET(CMAKE_INSTALL_UCRT_LIBRARIES TRUE)

  include(InstallRequiredSystemLibraries)
  if(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS)
    message(DEBUG "CMAKE_INSTALL_SYSTEM_RUNTIME_LIBs: ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS}")
    install(PROGRAMS ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} DESTINATION "bin" COMPONENT Libraries)
  endif()
endif()

###############################################################################
#                              I N S T A L L E R                              #
###############################################################################

######### Install SDK dependencies here ################

install(DIRECTORY "${openstudio_ROOT_DIR}/Radiance" DESTINATION "." COMPONENT "OpenStudioApp" USE_SOURCE_PERMISSIONS)
install(DIRECTORY "${openstudio_ROOT_DIR}/Ruby" DESTINATION "." COMPONENT "OpenStudioApp" USE_SOURCE_PERMISSIONS)
install(DIRECTORY "${openstudio_ROOT_DIR}/EnergyPlus" DESTINATION "." COMPONENT "OpenStudioApp" USE_SOURCE_PERMISSIONS)
install(DIRECTORY "${openstudio_ROOT_DIR}/Examples" DESTINATION "." COMPONENT "OpenStudioApp" USE_SOURCE_PERMISSIONS)
install(DIRECTORY "${openstudio_ROOT_DIR}/Python" DESTINATION "." COMPONENT "Python" USE_SOURCE_PERMISSIONS)

# I don't see any point shipping libopenstudiolib in `lib/` when it's already installed in ./bin/ via fixup_bundle
# TODO: at 3.5.0, the lib/ directory on UNIX (only UNIX) contains the libopenstudiolib.so, but also the librubyengine.so, libpythonengine.so
# install(DIRECTORY "${openstudio_ROOT_DIR}/lib" DESTINATION "." COMPONENT "OpenStudioApp" USE_SOURCE_PERMISSIONS)

if(NOT APPLE)
  # On Mac, we want to have openstudio CLI next to the OpenStudioApp in ./OpenStudio.app/Contents/MacOS
  # But we still need it in the ./bin directory so it can be found relative to the files in ./lib, this occurs when a measure tries to use getOpenStudioCLI, see #695
  # In openstudio_app/CMakeLists.txt we've already copied the CLI to the OpenStudio.app/Contents/MacOS, and we install a symlink to ./bin as well
  # TODO: the link order is the reverse of the lib ones (where we create a symlink **in the bundle** that points to the ./lib contents)
  install(IMPORTED_RUNTIME_ARTIFACTS openstudio::openstudio DESTINATION bin COMPONENT "CLI")
endif()
install(IMPORTED_RUNTIME_ARTIFACTS openstudio::openstudiolib DESTINATION ${LIB_DESTINATION_DIR} COMPONENT "CLI")
install(IMPORTED_RUNTIME_ARTIFACTS openstudio::rubyengine DESTINATION ${LIB_DESTINATION_DIR} COMPONENT "CLI")
install(IMPORTED_RUNTIME_ARTIFACTS openstudio::pythonengine DESTINATION ${LIB_DESTINATION_DIR} COMPONENT "CLI")

# TODO: we should probably just install the **entire** OS SDK bin/ directory...
if(WIN32)
  install(PROGRAMS $<$<CONFIG:Debug>:${openstudio_ROOT_DIR}/bin/python312_d.dll>$<$<CONFIG:Release>:${openstudio_ROOT_DIR}/bin/python312.dll>$<$<CONFIG:RelWithDebInfo>:${openstudio_ROOT_DIR}/bin/python312.dll>$<$<CONFIG:MinSizeRel>:${openstudio_ROOT_DIR}/bin/python312.dll> DESTINATION bin COMPONENT "CLI")
endif()

# install(PROGRAMS ${OS_CLI_IMPORTED_PATH} DESTINATION bin COMPONENT "CLI" RENAME "${OS_CLI_IMPORTED_NAME}")


if(WIN32)
  install(PROGRAMS "${openstudio_ROOT_DIR}/bin/install_utility.exe" DESTINATION bin COMPONENT "CLI")
else()
  install(PROGRAMS "${openstudio_ROOT_DIR}/bin/install_utility" DESTINATION bin COMPONENT "CLI")
endif()

# Leaving it
set(CPACK_IFW_VERBOSE ON)

set(CPACK_PACKAGE_VENDOR "OpenStudio Coalition") # CPACK_IFW_PACKAGE_PUBLISHER is set from this

# These are ok, even if we have a prerelease tag
set(CPACK_PACKAGE_VERSION_MAJOR ${OpenStudioApplication_VERSION_MAJOR})
set(CPACK_PACKAGE_VERSION_MINOR ${OpenStudioApplication_VERSION_MINOR})
set(CPACK_PACKAGE_VERSION_PATCH ${OpenStudioApplication_VERSION_PATCH})

# CPACK_DEBIAN_PACKAGE_DESCRIPTION defaults to this one too. dpkg-deb -I xxx.deb will show this description
set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "OpenStudioApplication ${OpenStudioApplication_VERSION} is a Graphical User Interface for OpenStudio")
set(CPACK_PACKAGE_DESCRIPTION "OpenStudioApplication ${OpenStudioApplication_VERSION}, based on openstudio (core) ${OPENSTUDIO_VERSION}. OpenStudio is a cross-platform collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance")

set(CPACK_IFW_PACKAGE_TITLE "OpenStudioApplication ${OpenStudioApplication_VERSION}")
set(CPACK_IFW_PRODUCT_URL "https://openstudiocoalition.org")
set(CPACK_IFW_PACKAGE_WINDOW_ICON "${PROJECT_SOURCE_DIR}/icons/os_32.png")

# The actual package file name on disk
if(APPLE)
  # eg OpenStudioApplication-1.2.0-alpha+394bbe9f8d-macOS-10.15-x86_64 (future: OpenStudioApplication-1.2.0-alpha+394bbe9f8d-macOS-11.2-arm64)
  set(CPACK_PACKAGE_FILE_NAME "${CMAKE_PROJECT_NAME}-${OPENSTUDIOAPPLICATION_LONG_VERSION}-macOS${OSX_VERSION_MAJOR_MINOR}-${ARCH}")
elseif(UNIX)
  # eg: OpenStudioApplication-1.2.0-alpha+394bbe9f8d-Ubuntu18.04
  set(CPACK_PACKAGE_FILE_NAME "${CMAKE_PROJECT_NAME}-${OPENSTUDIOAPPLICATION_LONG_VERSION}-${LSB_RELEASE_ID_SHORT}${LSB_RELEASE_VERSION_SHORT}")
else()
  # eg: OpenStudioApplication-1.2.0-alpha+394bbe9f8d-Windows
  set(CPACK_PACKAGE_FILE_NAME "${CMAKE_PROJECT_NAME}-${OPENSTUDIOAPPLICATION_LONG_VERSION}-${CMAKE_SYSTEM_NAME}")
endif()

set(CPACK_PACKAGE_CONTACT "osc@openstudiocoalition.org")

# Install additional Documents, such as release notes
install(FILES "${PROJECT_SOURCE_DIR}/QT_LICENSE_GPL_3_0.txt" DESTINATION .  COMPONENT Licenses)
install(FILES "${PROJECT_SOURCE_DIR}/QT_LICENSE_LGPL_3_0.txt" DESTINATION . COMPONENT Licenses)
install(FILES "${PROJECT_SOURCE_DIR}/LICENSE.md" DESTINATION . COMPONENT Licenses)

# Not sure whether we want a "Accept license" box in the IFW installer or not...
set(CPACK_RESOURCE_FILE_LICENSE "${PROJECT_SOURCE_DIR}/LICENSE.md")
# set(CPACK_RESOURCE_FILE_README "${PROJECT_BINARY_DIR}/release/readme.html")

if (APPLE)
  set(CPACK_IFW_TARGET_DIRECTORY /Applications/OpenStudioApplication-${OpenStudioApplication_VERSION}/)
  # Custom installer icon. Has to be .icns on mac, .ico on windows, not supported on Unix
  set(CPACK_IFW_PACKAGE_ICON "${PROJECT_SOURCE_DIR}/icons/os.icns")
  # Launch OpenStudioApp at end of install
  set(CPACK_IFW_PACKAGE_RUN_PROGRAM "@TargetDir@/OpenStudioApp.app/Contents/MacOS/OpenStudioApp")
elseif(UNIX)

  # For debug
  # set(CPACK_DEBIAN_PACKAGE_DEBUG ON)

  # Focal Fossa (20.04) uses libwxgtk3.0-gtk3-0v5, apparently need libxcb-xinerama0 as well
  set(CPACK_DEBIAN_PACKAGE_DEPENDS "libxcb-xinerama0 (>= 1.13), libwxgtk3.0-0v5 (>= 3.0.0) | libwxgtk3.0-0 (>=3.0.0) | libwxgtk3.0-gtk3-0v5 (>=3.0.0) | libwxgtk3.2-1t64 (>= 3.2.0) | libwxgtk3.2-1 (>= 3.2.0), libxcb-cursor0")

  # These two will set the .deb install path correctly
  set(CPACK_SET_DESTDIR ON)
  set(CPACK_INSTALL_PREFIX /usr/local/openstudioapplication-${OpenStudioApplication_VERSION})

  set(CPACK_DEBIAN_PACKAGE_MAINTAINER "osc@openstudiocoalition.org")
  # Default the debian package name to include version to allow several versions to be installed concurrently instead of overwriting any existing one
  set(CPACK_DEBIAN_PACKAGE_NAME "openstudioapplication-${OpenStudioApplication_VERSION}") # Includes the prerelease tag if any
  set(CPACK_DEBIAN_PACKAGE_HOMEPAGE "https://openstudiocoalition.org/")

  set(POSTINST_FILE "${PROJECT_BINARY_DIR}/postinst")
  set(POSTRM_FILE "${PROJECT_BINARY_DIR}/postrm")
  configure_file(${PROJECT_SOURCE_DIR}/debian/postinst.in ${POSTINST_FILE} @ONLY)
  configure_file(${PROJECT_SOURCE_DIR}/debian/postrm.in ${POSTRM_FILE} @ONLY)
  execute_process(COMMAND chmod 755 "${POSTINST_FILE}")
  execute_process(COMMAND chmod 755 "${POSTRM_FILE}")

  ## Add a symlink to the App: /usr/local/bin/OpenStudioApp should point to /usr/local/openstudioapplication-${OPENSTUDIOAPPLICATION_VERSION}/bin/OpenStudioApp
  ## Add an arbitrary link (broken) at build/OpenStudioApp (if build/ is your build folder) that already points to the **future** /usr/local/openstudioapplication-x.y.z/bin/OpenStudioApp
  #execute_process(COMMAND ln -sf ${CPACK_INSTALL_PREFIX}/bin/OpenStudioApp ${CMAKE_CURRENT_BINARY_DIR}/OpenStudioApp)
  ## Plus a versioned one
  #execute_process(COMMAND ln -sf ${CPACK_INSTALL_PREFIX}/bin/OpenStudioApp ${CMAKE_CURRENT_BINARY_DIR}/OpenStudioApp-${OPENSTUDIOAPPLICATION_VERSION})
  ## Have these links be installed with the .deb package in /usr/local/bin
  #install(FILES ${CMAKE_CURRENT_BINARY_DIR}/OpenStudioApp DESTINATION /usr/local/bin COMPONENT OpenStudioApp)
  #install(FILES ${CMAKE_CURRENT_BINARY_DIR}/OpenStudioApp-${OPENSTUDIOAPPLICATION_VERSION} DESTINATION /usr/local/bin COMPONENT OpenStudioApp)

  ## Add an arbitrary link (broken) at build/openstudio (if build/ is your build folder) that already points to the **future** /usr/local/openstudioapplication-x.y.z/bin/openstudio
  #execute_process(COMMAND ln -sf ${CPACK_INSTALL_PREFIX}/bin/openstudio ${CMAKE_CURRENT_BINARY_DIR}/openstudio)
  ## Plus a versioned one
  #execute_process(COMMAND ln -sf ${CPACK_INSTALL_PREFIX}/bin/openstudio ${CMAKE_CURRENT_BINARY_DIR}/openstudio-${OPENSTUDIO_VERSION})
  ## Have this link be installed with the .deb package in /usr/local/bin
  #install(FILES ${CMAKE_CURRENT_BINARY_DIR}/openstudio DESTINATION /usr/local/bin COMPONENT CLI)
  #install(FILES ${CMAKE_CURRENT_BINARY_DIR}/openstudio-${OpenStudio_VERSION} DESTINATION /usr/local/bin COMPONENT CLI)


  # Create a proper App with file associations

  # Install the .desktop manifest (allows the App to be seen in the Dash and adding to the dock, and to map it a mimetype)
  # install(FILES "${PROJECT_SOURCE_DIR}/debian/openstudioapp.desktop" DESTINATION /usr/share/applications)
  install(FILES "${PROJECT_SOURCE_DIR}/debian/openstudioapp.desktop" DESTINATION Temp/)

  # Install the XML mime info
  # install(FILES "${PROJECT_SOURCE_DIR}/debian/x-openstudio.xml" DESTINATION /usr/share/mime/application)
  install(FILES "${PROJECT_SOURCE_DIR}/debian/x-openstudio.xml" DESTINATION Temp/)

  set(CPACK_DEBIAN_PACKAGE_CONTROL_EXTRA "${CPACK_DEBIAN_BIN_PACKAGE_CONTROL_EXTRA};${POSTINST_FILE};${POSTRM_FILE}")

  ## try to set up the menu system
  # Problem is the use of "sudo". Perhaps we should copy icons and manifest to $HOME/.local/share/...
  #find_program(XDG-MIME_EXECUTABLE xdg-mime)
  #find_program(XDG-DESKTOP-MENU_EXECUTABLE xdg-desktop-menu)
  #find_program(UPDATE-MIME-DATABASE-EXECUTABLE update-mime-database)
  #find_program(GTK-UPDATE-ICON-CACHE-EXECUTABLE gtk-update-icon-cache)


  ## Install the Desktop Menu
  ## xdg-desktop-menu install --novendor /usr/share/applications/openstudioapp.desktop
  #install(CODE "execute_process(COMMAND ${XDG-DESKTOP-MENU_EXECUTABLE} install --novendor --mode system /usr/share/applications/openstudioapp.desktop)")

  ## Register the mime description: this places it in /usr/share/mime/packages/
  ## sudo xdg-mime install --novendor --mode system x-openstudio.xml
  #install(CODE "execute_process(COMMAND sudo ${MIME_EXECUTABLE} install --novendor --mode system /usr/share/mime/application/x-openstudio.xml)")
  #install(CODE "execute_process(COMMAND echo COUCOU)")

  ## Register the application launcher with the registered mimetype
  ## sudo xdg-mime default openstudio.desktop application/x-openstudio
  #install(CODE "execute_process(COMMAND sudo ${MIME_EXECUTABLE} default /usr/share/applications/openstudio.desktop application/x-openstudio)")


  ## Update the mime cache and icon cache
  ## sudo update-mime-database /usr/share/mime
  #install(CODE "execute_process(COMMAND sudo ${UPDATE-MIME-DATABASE-EXECUTABLE} /usr/share/mime)")
  ## sudo gtk-update-icon-cache /usr/share/icons/hicolor/ -f
  #install(CODE "execute_process(COMMAND ${GTK-UPDATE-ICON-CACHE-EXECUTABLE} /usr/share/icons/hicolor/ -f)")



elseif(WIN32)
  set(CPACK_PACKAGE_INSTALL_DIRECTORY "openstudioapplication-${OpenStudioApplication_VERSION}")
  set(CPACK_IFW_TARGET_DIRECTORY "C:/${CPACK_PACKAGE_INSTALL_DIRECTORY}")
  set(CPACK_BINARY_IFW ON CACHE BOOL "Enable to build IFW packages")
  set(CPACK_BINARY_NSIS OFF CACHE BOOL "Enable to build NSIS packages")

  # Custom installer icon. Has to be .icns on mac, .ico on windows, not supported on Unix
  set(CPACK_IFW_PACKAGE_ICON "${PROJECT_SOURCE_DIR}/icons/os.ico")

  # Launch OpenStudioApp at end of install
  set(CPACK_IFW_PACKAGE_RUN_PROGRAM "@TargetDir@/bin/OpenStudioApp")
endif()


if(APPLE)

  if(CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION)
    # Codesign inner binaries and libraries, in the CPack staging area for the current project & component
    # Define some required variables for the script in the scope of the install(SCRIPT) first
    set(CLI_FILES_TO_SIGN
      lib/libopenstudiolib.dylib
      lib/libpythonengine.so
      lib/librubyengine.so
      bin/install_utility
    )
    install(CODE "set(FILES_TO_SIGN \"${CLI_FILES_TO_SIGN}\")" COMPONENT "CLI")
    install(CODE "set(CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION \"${CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION}\")" COMPONENT CLI)
    install(CODE "set(CPACK_CODESIGNING_MACOS_IDENTIFIER \"${CPACK_CODESIGNING_MACOS_IDENTIFIER}\")" COMPONENT CLI)
    install(SCRIPT "${CMAKE_CURRENT_LIST_DIR}/CMake/install_codesign_script.cmake" COMPONENT CLI)

    # These two have special globs added to the their install script, and I define FILES_TO_SIGN in there if needed (long list)
    install(CODE "set(CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION \"${CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION}\")" COMPONENT OpenStudioApp)
    install(CODE "set(CPACK_CODESIGNING_MACOS_IDENTIFIER \"${CPACK_CODESIGNING_MACOS_IDENTIFIER}\")" COMPONENT OpenStudioApp)
    install(SCRIPT "${CMAKE_CURRENT_LIST_DIR}/CMake/install_codesign_script_OpenStudioApp.cmake" COMPONENT OpenStudioApp)

    install(CODE "set(CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION \"${CPACK_CODESIGNING_DEVELOPPER_ID_APPLICATION}\")" COMPONENT Python)
    install(CODE "set(CPACK_CODESIGNING_MACOS_IDENTIFIER \"${CPACK_CODESIGNING_MACOS_IDENTIFIER}\")" COMPONENT Python)
    install(SCRIPT "${CMAKE_CURRENT_LIST_DIR}/CMake/install_codesign_script_Python.cmake" COMPONENT Python)

    # Register the CPACK_POST_BUILD_SCRIPTS
    set(CPACK_POST_BUILD_SCRIPTS "${CMAKE_CURRENT_LIST_DIR}/CMake/CPackSignAndNotarizeDmg.cmake")
  endif()

endif()

######################################################################################################################################################
#                                                    P A C K A G I N G   &   C O M P O N E N T S                                                     #
######################################################################################################################################################

# Careful: the position (and what you include) matters a lot!
include(CPack)
include(CPackIFW)
# include(CPackComponent)

# Note: If you ever need to debug a CPack Package Error in MSVC, right-click on "PACKAGE" target, click Properties
# and in the Build Events > Post Build Event, edit the command that calls cpack to add `--verbose --debug`:
# eg: `"C:\Program Files\CMake\bin\cpack.exe" -C $(Configuration) --config ./CPackConfig.cmake --verbose --debug`


cpack_add_component(Resources
  DISPLAY_NAME "Application Resources"
  DESCRIPTION "Resource Files used by the OpenStudio Application"
)

cpack_add_component(OpenStudioApp
  DISPLAY_NAME "OpenStudio Application"
  DESCRIPTION "OpenStudio Application"
  REQUIRED
)

cpack_ifw_configure_component(Resources
  REQUIRES_ADMIN_RIGHTS
)

cpack_ifw_configure_component(OpenStudioApp
  DEPENDS Resources CLI
  SCRIPT src/openstudio_app/install_operations.qs
  REQUIRES_ADMIN_RIGHTS
)

cpack_add_component(Libraries
  DISPLAY_NAME "Install required system libraries"
  DESCRIPTION  "Install compiler-provided system runtime libraries, and Windows Universal CRT libraries for app-local deployment"
  REQUIRED
  HIDDEN
)

cpack_add_component(Python
  DISPLAY_NAME "Python Bindings"
  DESCRIPTION "Support for Python Measures"
)

cpack_add_component(RubyAPI
  DISPLAY_NAME "Ruby API"
  DESCRIPTION "The Ruby openstudio modeleditor for Sketchup"
)

cpack_add_component(
  Licenses
  DISPLAY_NAME "Licenses"
  DESCRIPTION "License files for OpenStudio Application"
  REQUIRED
  HIDDEN
)

cpack_ifw_configure_component(Licenses
  FORCED_INSTALLATION
  LICENSES "OpenStudio Application" ${CPACK_RESOURCE_FILE_LICENSE}
)

add_custom_target(PACKAGE_DEBUG
  COMMAND ${CMAKE_CPACK_COMMAND} --debug --verbose --config CPackConfig.cmake
  COMMENTS "Build package with debug and verbose output"
)