How to change /dev/sda to /dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-WCC7K5SV0RHJ

[interduo]

I have got very old pool.

root@hpm:~# zpool status
  pool: zfs-hpm
 state: ONLINE
  scan: scrub in progress since Sat Mar 18 06:24:53 2023
	4.05T scanned at 197M/s, 3.89T issued at 189M/s, 10.9T total
	0B repaired, 35.61% done, 10:51:08 to go
config:

	NAME                                          STATE     READ WRITE CKSUM
	zfs-hpm                                       ONLINE       0     0     0
	  raidz1-0                                    ONLINE       0     0     0
	    sdb                                       ONLINE       0     0     0
	    ata-WDC_WD40EFRX-68N32N0_WD-WCC7K0CF9X9T  ONLINE       0     0     0
	    sdd                                       ONLINE       0     0     0
	    sde                                       ONLINE       0     0     0

I would like to change sdb,sdd,sde to it's location in /dev/disk/by-id.

I tried:

root@hpm:~# zpool replace zfs-hpm /dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-WCC7K5SV0RHJ
/dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-WCC7K5SV0RHJ is in use and contains a unknown filesystem.

Is it any way to do it easily without rebuilding wole pool?

[IvanVolosyuk]

You can try: zpool export zfs-hpm zpool import -d /dev/disk/by-id zfs-hpm Alternatively, you can specify -d multiple times with specific device names, according to the documentation.

…

On Sat, Mar 18, 2023 at 10:29 PM Interduo ***@***.***> wrote: I have got very old pool. ***@***.***:~# zpool status pool: zfs-hpm state: ONLINE scan: scrub in progress since Sat Mar 18 06:24:53 2023 4.05T scanned at 197M/s, 3.89T issued at 189M/s, 10.9T total 0B repaired, 35.61% done, 10:51:08 to go config: NAME STATE READ WRITE CKSUM zfs-hpm ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 sdb ONLINE 0 0 0 ata-WDC_WD40EFRX-68N32N0_WD-WCC7K0CF9X9T ONLINE 0 0 0 sdd ONLINE 0 0 0 sde ONLINE 0 0 0 I would like to change sdb,sdd,sde to it's location in /dev/disk/by-id. I tried: ***@***.***:~# zpool replace zfs-hpm /dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-WCC7K5SV0RHJ /dev/disk/by-id/ata-WDC_WD40EFRX-68N32N0_WD-WCC7K5SV0RHJ is in use and contains a unknown filesystem. Is it any way to do it easily without rebuilding wole pool? — Reply to this email directly, view it on GitHub <#14647>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABXQ6HOGJZMEI246VLARMTLW4WMCHANCNFSM6AAAAAAV7NKB2E> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[interduo]

Is there a on-line way to do this?

[devZer0]

yes. you can write several commands in one line , separated by an ";"