Espruino WIFI, RED Light fixed -> no TTY created on usb connected.

[espruino-discuss3]

Posted at 2018-01-04 by L0cutus

Hello,
After a:

reset();
save();

all stopped working, so i have tryed to reflash from WEB IDE and it worked (i mean no errors messages),
unfortunately i have no my espruino not working at all (i mean no TTY created while connected to my pc) and a RED led always on... any idea ?
Thanks !

[espruino-discuss3]

Posted at 2018-01-04 by @gfwilliams

Are you sure you flashed the correct firmware? That can often happen if you write the firmware for a different device (or a broken firmware). It's easy to fix - just reflash.

You can also try powering on while holding the button for 5 seconds or so - it'll try and load Espruino but will make sure no saved code is loaded.

---

Posted at 2018-01-04 by L0cutus

solved thanks, i think the problem was that i have 2 espruino devices attached to my pc (pico + wifi) and i think the web ide flashed the pico into the wifi :)
Now it works !

---

Posted at 2018-01-05 by @gfwilliams

Great! Yes, the Web IDE tries to auto-detect the device type based on the board that you last connected to - if that happened to be the Pico it'd have flashed that firmware.