new board based on stm32f405 with sd configured in spi not sdio

[hakimoune]

Hello,
how to configure a card with same config as pyboard with stm32f405 but the sd card is connected with spi instead of sdio.
thank you

[DavesCodeMusings]

Below is a working example of an SPI attached microSD card. (I'm using ESP32, not pyboard, so you'll need to adjust the slot and pin numbers.)

from machine import Pin, SDCard
from os import VfsFat, mount

SD_MOUNT = "/pub"
print(f"Mounting micro SD card on: {SD_MOUNT}")
sdcard = SDCard(slot=3, sck=Pin(12), miso=Pin(13), mosi=Pin(11), cs=Pin(10))
vfs = VfsFat(sdcard)
mount(vfs, SD_MOUNT)

[hakimoune]

thank you for your response, this is in runtime but how do we do it before porting (Build and Flash) ?

[DavesCodeMusings]

Sorry, I misunderstood your original question. I have no idea.