ESP32-S3 firmware flashing error

[aravikyr]

E (291) quad_psram: PSRAM ID read error: 0x00ffffff, PSRAM chip not found or not supported, or wrong PSRAM line mode
E (291) esp_psram: PSRAM enabled but initialization failed. Bailing out.

[Josverl]

What command did you issue to flash, and what firmware file did you use?

[aravikyr]

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3820,len:0x105c
load:0x403c9700,len:0x4
load:0x403c9704,len:0xbd8
load:0x403cc700,len:0x2e34
entry 0x403c989c
E (289) quad_psram: PSRAM ID read error: 0x00ffffff, PSRAM chip not found or not supported, or wrong PSRAM line mode
E (289) esp_psram: PSRAM enabled but initialization failed. Bailing out.
MicroPython v1.24.1 on 2024-11-29; Generic ESP32S3 module with ESP32S3
Type "help()" for more information.

MPY: soft reboot
MicroPython v1.24.1 on 2024-11-29; Generic ESP32S3 module with ESP32S3

Type "help()" for more information

[Josverl]

Were the questions unclear?

[Lobo-T]

I can't see an actual question here? But as an accomplished mindreader I'll anwer anyway:
Two possibilities:
1: Your board doesn't have PSRAM.
2: You have downloaded firmware for quad SPI PSRAM on a board that has Octo SPI PSRAM.