OpenBCI v3 Battery Connector

[jnaulty]

Hey OpenBCI Crew!
I finally got the chance to check out the v3 board. Unfortunately, I don't have a 4XAA Battery pack. More importantly, I don't have the female connector to power the device. Do you have any information regarding what type of 2 pin female connector is required to fit in the male pins on the bottom of the board?

[vaibhav2912]

https://github.com/OpenBCI/Docs/blob/master/hardware/01-OpenBCI_Hardware.md

This is the OpenBCI hardware documentation. Look in the first paragraph. It says 'The battery connector is a standard JST type two position (with polarity key at the TOP), and the SD card holder that we are using is ST-TF-003A.'