Update Zigbee_On_Off_Light.ino

Author: Jason2866

examples/arduino-zigbee-light/src/Zigbee_On_Off_Light.ino

@@ -32,25 +32,28 @@
 
 #include "Zigbee.h"
 
-#define LED_PIN               RGB_BUILTIN
-#define BUTTON_PIN            9  // ESP32-C6/H2 Boot button
+/* Zigbee light bulb configuration */
 #define ZIGBEE_LIGHT_ENDPOINT 10
+uint8_t led = RGB_BUILTIN;
+uint8_t button = BOOT_PIN;
 
 ZigbeeLight zbLight = ZigbeeLight(ZIGBEE_LIGHT_ENDPOINT);
 
 /********************* RGB LED functions **************************/
 void setLED(bool value) {
-  digitalWrite(LED_PIN, value);
+  digitalWrite(led, value);
 }
 
 /********************* Arduino functions **************************/
 void setup() {
+  Serial.begin(115200);
+
   // Init LED and turn it OFF (if LED_PIN == RGB_BUILTIN, the rgbLedWrite() will be used under the hood)
-  pinMode(LED_PIN, OUTPUT);
-  digitalWrite(LED_PIN, LOW);
+  pinMode(led, OUTPUT);
+  digitalWrite(led, LOW);
 
   // Init button for factory reset
-  pinMode(BUTTON_PIN, INPUT_PULLUP);
+  pinMode(button, INPUT_PULLUP);
 
   //Optional: set Zigbee device name and model
   zbLight.setManufacturerAndModel("Espressif", "ZBLightBulb");
@@ -59,28 +62,40 @@ void setup() {
   zbLight.onLightChange(setLED);
 
   //Add endpoint to Zigbee Core
-  log_d("Adding ZigbeeLight endpoint to Zigbee Core");
+  Serial.println("Adding ZigbeeLight endpoint to Zigbee Core");
   Zigbee.addEndpoint(&zbLight);
 
   // When all EPs are registered, start Zigbee. By default acts as ZIGBEE_END_DEVICE
-  log_d("Calling Zigbee.begin()");
-  Zigbee.begin();
+  if (!Zigbee.begin()) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println();
 }
 
 void loop() {
   // Checking button for factory reset
-  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+  if (digitalRead(button) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
     int startTime = millis();
-    while (digitalRead(BUTTON_PIN) == LOW) {
+    while (digitalRead(button) == LOW) {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot
-        Serial.printf("Resetting Zigbee to factory settings, reboot.\n");
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
+        delay(1000);
         Zigbee.factoryReset();
       }
     }
+    // Toggle light by pressing the button
+    zbLight.setLight(!zbLight.getLightState());
   }
   delay(100);
 }