Update sdkconfig.defaults

Author: Jason2866

examples/espidf-arduino-matter-light/sdkconfig.defaults

@@ -6,9 +6,17 @@ CONFIG_AUTOSTART_ARDUINO=y
 # Boot Messages - Log level
 CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y
 # Arduino Log Level
-CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE=y
+CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_INFO=y
 # IDF Log Level
-CONFIG_LOG_DEFAULT_LEVEL_WARN=y
+CONFIG_LOG_DEFAULT_LEVEL_ERROR=y
+
+# Default to 921600 baud when flashing and monitoring device
+CONFIG_ESPTOOLPY_BAUD_921600B=y
+CONFIG_ESPTOOLPY_BAUD=921600
+CONFIG_ESPTOOLPY_COMPRESSED=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
 
 #enable BT
 CONFIG_BT_ENABLED=y
@@ -28,16 +36,17 @@ CONFIG_PARTITION_TABLE_OFFSET=0xC000
 # Disable chip shell
 CONFIG_ENABLE_CHIP_SHELL=n
 
+# Enable OTA Requester
+CONFIG_ENABLE_OTA_REQUESTOR=n
+
 #enable lwIP route hooks
 CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT=y
 CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT=y
 
-# Button
-CONFIG_BUTTON_PERIOD_TIME_MS=20
-CONFIG_BUTTON_LONG_PRESS_TIME_MS=5000
-
 # disable softap by default
 CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n
+CONFIG_ENABLE_WIFI_STATION=y
+CONFIG_ENABLE_WIFI_AP=n
 
 # Disable DS Peripheral
 CONFIG_ESP_SECURE_CERT_DS_PERIPHERAL=n
@@ -52,15 +61,12 @@ CONFIG_MBEDTLS_HKDF_C=y
 # unique local addresses for fabrics(MAX_FABRIC), a link local address(1)
 CONFIG_LWIP_IPV6_NUM_ADDRESSES=6
 
-
-# ESP32-S3-DevKitC-1 Settings
+# ESP32-C3-DevKit Settings
 # Buttons
-CONFIG_BSP_BUTTONS_NUM=1
-CONFIG_BSP_BUTTON_1_TYPE_GPIO=y
-CONFIG_BSP_BUTTON_1_GPIO=0
-CONFIG_BSP_BUTTON_1_LEVEL=0
+CONFIG_BUTTON_PIN=9
 # LEDs
-CONFIG_BSP_LEDS_NUM=1
-CONFIG_BSP_LED_TYPE_RGB=y
-CONFIG_BSP_LED_RGB_GPIO=48
-CONFIG_BSP_LED_RGB_BACKEND_RMT=y
+CONFIG_WS2812_PIN=8
+# max GPIO
+CONFIG_ENV_GPIO_RANGE_MAX=19
+CONFIG_ENV_GPIO_IN_RANGE_MAX=19
+CONFIG_ENV_GPIO_OUT_RANGE_MAX=19