Manual fixtures: update for new devices

Author: bouwew

scripts/manual_fixtures.py

@@ -72,19 +72,20 @@ def json_writer(manual_name: str, output: dict) -> None:
 m_adam_cooling.pop("67d73d0bd469422db25a618a5fb8eeb0")
 m_adam_cooling.pop("10016900610d4c7481df78c89606ef22")
 
-# Correct setpoint for device "ad4838d7d35c4d6ea796ee12ae5aedf8" and zone "f2bf9048bef64cc5b6d5110154e33c81"
+# Correct setpoint for devices "ad4838d7d35c4d6ea796ee12ae5aedf8", "da575e9e09b947e281fb6e3ebce3b174",
+# "14df5c4dc8cb4ba69f9d1ac0eaf7c5c6" and zone "f2bf9048bef64cc5b6d5110154e33c81"
 m_adam_cooling["ad4838d7d35c4d6ea796ee12ae5aedf8"]["sensors"]["setpoint"] = 23.5
-m_adam_cooling["ad4838d7d35c4d6ea796ee12ae5aedf8"]["sensors"]["temperature"] = 25.8
+m_adam_cooling["ad4838d7d35c4d6ea796ee12ae5aedf8"]["sensors"]["temperature"] = 24.0
+m_adam_cooling["da575e9e09b947e281fb6e3ebce3b174"]["sensors"]["setpoint"] = 23.5
+m_adam_cooling["da575e9e09b947e281fb6e3ebce3b174"]["sensors"]["temperature"] = 23.8
+m_adam_cooling["14df5c4dc8cb4ba69f9d1ac0eaf7c5c6"]["sensors"]["setpoint"] = 23.5
+m_adam_cooling["14df5c4dc8cb4ba69f9d1ac0eaf7c5c6"]["sensors"]["temperature"] = 24.2
 m_adam_cooling["f2bf9048bef64cc5b6d5110154e33c81"]["thermostat"]["setpoint"] = 23.5
-m_adam_cooling["f2bf9048bef64cc5b6d5110154e33c81"]["sensors"]["temperature"] = 25.8
+m_adam_cooling["f2bf9048bef64cc5b6d5110154e33c81"]["sensors"]["temperature"] = 24.2
 m_adam_cooling["f2bf9048bef64cc5b6d5110154e33c81"]["select_schedule"] = "off"
 m_adam_cooling["f2bf9048bef64cc5b6d5110154e33c81"]["control_state"] = "cooling"
 m_adam_cooling["f2bf9048bef64cc5b6d5110154e33c81"]["climate_mode"] = "cool"
 
-# Add new key available
-m_adam_cooling["ad4838d7d35c4d6ea796ee12ae5aedf8"]["available"] = True
-
-
 # (again, following diff)
 # Remove device "2568cc4b9c1e401495d4741a5f89bee1" from anywhere
 m_adam_cooling.pop("2568cc4b9c1e401495d4741a5f89bee1")
@@ -93,13 +94,14 @@ def json_writer(manual_name: str, output: dict) -> None:
 m_adam_cooling.pop("854f8a9b0e7e425db97f1f110e1ce4b3")
 
 # Go for 1772
-m_adam_cooling["1772a4ea304041adb83f357b751341ff"]["sensors"]["temperature"] = 21.6
+m_adam_cooling["1772a4ea304041adb83f357b751341ff"]["sensors"]["setpoint"] = 25.0
+m_adam_cooling["1772a4ea304041adb83f357b751341ff"]["sensors"]["temperature"] = 24.8
 
 # Go for e2f4
-m_adam_cooling["e2f4322d57924fa090fbbc48b3a140dc"]["sensors"]["setpoint"] = 23.5
-m_adam_cooling["e2f4322d57924fa090fbbc48b3a140dc"]["sensors"]["temperature"] = 23.9
+m_adam_cooling["e2f4322d57924fa090fbbc48b3a140dc"]["sensors"]["setpoint"] = 25.0
+m_adam_cooling["e2f4322d57924fa090fbbc48b3a140dc"]["sensors"]["temperature"] = 25.6
 m_adam_cooling["f871b8c4d63549319221e294e4f88074"]["thermostat"]["setpoint"] = 25.0
-m_adam_cooling["f871b8c4d63549319221e294e4f88074"]["sensors"]["temperature"] = 23.9
+m_adam_cooling["f871b8c4d63549319221e294e4f88074"]["sensors"]["temperature"] = 25.8
 m_adam_cooling["f871b8c4d63549319221e294e4f88074"]["control_state"] = "cooling"
 m_adam_cooling["f871b8c4d63549319221e294e4f88074"]["climate_mode"] = "auto"
 
@@ -137,8 +139,13 @@ def json_writer(manual_name: str, output: dict) -> None:
 # Correct setpoint for "ad4838d7d35c4d6ea796ee12ae5aedf8"
 m_adam_heating["f2bf9048bef64cc5b6d5110154e33c81"]["thermostat"]["setpoint"] = 20.0
 m_adam_heating["ad4838d7d35c4d6ea796ee12ae5aedf8"]["sensors"]["setpoint"] = 20.0
+m_adam_cooling["da575e9e09b947e281fb6e3ebce3b174"]["sensors"]["setpoint"] = 20.0
+m_adam_cooling["14df5c4dc8cb4ba69f9d1ac0eaf7c5c6"]["sensors"]["setpoint"] = 20.0
 m_adam_heating["f2bf9048bef64cc5b6d5110154e33c81"]["sensors"]["temperature"] = 19.1
 m_adam_heating["ad4838d7d35c4d6ea796ee12ae5aedf8"]["sensors"]["temperature"] = 19.1
+m_adam_cooling["da575e9e09b947e281fb6e3ebce3b174"]["sensors"]["temperature"] = 19.3
+m_adam_cooling["14df5c4dc8cb4ba69f9d1ac0eaf7c5c6"]["sensors"]["temperature"] = 19.5
+
 
 m_adam_heating["f2bf9048bef64cc5b6d5110154e33c81"]["control_state"] = "preheating"
 m_adam_heating["f2bf9048bef64cc5b6d5110154e33c81"]["climate_mode"] = "heat"