Seo November (#1172)

* wip

* llms

* fix

* fresh llms

Author: 0xlukem

.ai/categories/basics.md

@@ -30,7 +30,7 @@ This dual-format approach enables Asset Hub to maintain compatibility with Ether
 
 The platform handles two distinct address formats:
 
-- [Ethereum-style addresses (20 bytes)](https://ethereum.org/en/developers/docs/accounts/#account-creation){target=\_blank}
+- [Ethereum-style addresses (20 bytes)](https://ethereum.org/developers/docs/accounts/#account-creation){target=\_blank}
 - [Polkadot native account IDs (32 bytes)](/polkadot-protocol/parachain-basics/accounts/){target=\_blank}
 
 ### Ethereum to Polkadot Mapping
@@ -2129,7 +2129,7 @@ To create the ERC-20 contract, you can follow the steps below:
     - Key functions:
 
         - **`mint(address to, uint256 amount)`**: Allows the contract owner to create new tokens for any address. The amount should include 18 decimals (e.g., 1 token = 1000000000000000000).
-        - Inherited [Standard ERC-20](https://ethereum.org/en/developers/docs/standards/tokens/erc-20/){target=\_blank} functions:
+        - Inherited [Standard ERC-20](https://ethereum.org/developers/docs/standards/tokens/erc-20/){target=\_blank} functions:
             - **`transfer(address recipient, uint256 amount)`**: Sends a specified amount of tokens to another address.
             - **`approve(address spender, uint256 amount)`**: Grants permission for another address to spend a specific number of tokens on behalf of the token owner.
             - **`transferFrom(address sender, address recipient, uint256 amount)`**: Transfers tokens from one address to another, if previously approved.
@@ -2247,7 +2247,7 @@ Before starting, make sure you have:
 
 - [Talisman](https://talisman.xyz/){target=\_blank} installed and connected to the Polkadot Hub TestNet. Check the [Connect to Polkadot](/develop/smart-contracts/connect-to-polkadot/){target=\_blank} guide for more information.
 - A funded account with some PAS tokens (you can get them from the [Faucet](https://faucet.polkadot.io/?parachain=1111){target=\_blank}, noting that the faucet imposes a daily token limit, which may require multiple requests to obtain sufficient funds for testing).
-- Basic understanding of Solidity and NFTs, see the [Solidity Basics](https://soliditylang.org/){target=\_blank} and the [NFT Overview](https://ethereum.org/en/nft/){target=\_blank} guides for more details.
+- Basic understanding of Solidity and NFTs, see the [Solidity Basics](https://soliditylang.org/){target=\_blank} and the [NFT Overview](https://ethereum.org/nft/){target=\_blank} guides for more details.
 
 ## Create the NFT Contract
 
@@ -2299,7 +2299,7 @@ To create the NFT contract, you can follow the steps below:
     - Key functions:
 
         - **[`_safeMint(to, tokenId)`](https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v5.4.0/contracts/token/ERC721/ERC721.sol#L304){target=\_blank}**: An internal function from `ERC721` that safely mints new tokens. It includes checks to ensure the recipient can handle `ERC721` tokens, with the `_nextTokenId` mechanism automatically generating unique sequential token IDs and the `onlyOwner` modifier restricting minting rights to the contract owner.
-        - Inherited [Standard ERC721](https://ethereum.org/en/developers/docs/standards/tokens/erc-721/){target=\_blank} functions provide a standardized set of methods that enable interoperability across different platforms, wallets, and marketplaces, ensuring that your NFT can be easily transferred, traded, and managed by any system that supports the `ERC721` standard:
+        - Inherited [Standard ERC721](https://ethereum.org/developers/docs/standards/tokens/erc-721/){target=\_blank} functions provide a standardized set of methods that enable interoperability across different platforms, wallets, and marketplaces, ensuring that your NFT can be easily transferred, traded, and managed by any system that supports the `ERC721` standard:
             - **`transferFrom(address from, address to, uint256 tokenId)`**: Transfers a specific NFT from one address to another.
             - **`safeTransferFrom(address from, address to, uint256 tokenId)`**: Safely transfers an NFT, including additional checks to prevent loss.
             - **`approve(address to, uint256 tokenId)`**: Grants permission for another address to transfer a specific NFT.
@@ -2403,7 +2403,7 @@ Page Title: EVM vs PolkaVM
     PolkaVM smart contracts with Ethereum compatibility are in **early-stage development and may be unstable or incomplete**.
 ## Introduction
 
-While [PolkaVM](/polkadot-protocol/smart-contract-basics/polkavm-design/){target=\_blank} strives for maximum Ethereum compatibility, several fundamental design decisions create necessary divergences from the [EVM](https://ethereum.org/en/developers/docs/evm/){target=\_blank}. These differences represent trade-offs that enhance performance and resource management while maintaining accessibility for Solidity developers.
+While [PolkaVM](/polkadot-protocol/smart-contract-basics/polkavm-design/){target=\_blank} strives for maximum Ethereum compatibility, several fundamental design decisions create necessary divergences from the [EVM](https://ethereum.org/developers/docs/evm/){target=\_blank}. These differences represent trade-offs that enhance performance and resource management while maintaining accessibility for Solidity developers.
 
 ## Core Virtual Machine Architecture
 
@@ -2452,7 +2452,7 @@ PolkaVM offers an elegant alternative through its [on-chain constructors](https:
 
 ## Gas Model
 
-Ethereum's resource model relies on a single metric: [gas](https://ethereum.org/en/developers/docs/gas/#what-is-gas){target=\_blank}, which serves as the universal unit for measuring computational costs. Each operation on the network consumes a specific amount of gas. Most platforms aiming for Ethereum compatibility typically adopt identical gas values to ensure seamless integration.
+Ethereum's resource model relies on a single metric: [gas](https://ethereum.org/developers/docs/gas/#what-is-gas){target=\_blank}, which serves as the universal unit for measuring computational costs. Each operation on the network consumes a specific amount of gas. Most platforms aiming for Ethereum compatibility typically adopt identical gas values to ensure seamless integration.
 
 The significant changes to Ethereum's gas model will be outlined in the following sections.
 
@@ -5818,7 +5818,7 @@ By the end of this tutorial, you'll have a working local parachain and understan
 
 Before getting started, ensure you have done the following:
 
-- Completed the [Install Polkadot SDK Dependencies](/develop/parachains/install-polkadot-sdk/){target=\_blank} guide and successfully installed [Rust](https://www.rust-lang.org/){target=\_blank} and the required packages to set up your development environment.
+- Completed the [Install Polkadot SDK Dependencies](/develop/parachains/install-polkadot-sdk/){target=\_blank} guide and successfully installed [Rust](https://rust-lang.org/){target=\_blank} and the required packages to set up your development environment.
 
 For this tutorial series, you need to use Rust `1.86`. Newer versions of the compiler may not work with this parachain template version.
 
@@ -6103,7 +6103,7 @@ A component of the Asset Hub parachain, PolkaVM helps enable the deployment of S
 
 The [Frontier](https://github.com/polkadot-evm/frontier){target=\_blank} project provides a set of modules that enables a Polkadot SDK-based chain to run an Ethereum emulation layer that allows the execution of EVM smart contracts natively with the same API/RPC interface.
 
-[Ethereum addresses (ECDSA)](https://ethereum.org/en/glossary/#address){target=\_blank} can also be mapped directly to and from the Polkadot SDK's SS58 scheme from existing accounts. Moreover, you can modify Polkadot SDK to use the ECDSA signature scheme directly to avoid any mapping.
+[Ethereum addresses (ECDSA)](https://ethereum.org/glossary/#address){target=\_blank} can also be mapped directly to and from the Polkadot SDK's SS58 scheme from existing accounts. Moreover, you can modify Polkadot SDK to use the ECDSA signature scheme directly to avoid any mapping.
 
 At a high level, [Frontier](https://github.com/polkadot-evm/frontier){target=\_blank} is composed of three main components: