Box64 on rpi3b+

[DotJARgon]

What modifications would be necessary for box64 to run on the rpi3b+? I see that this is supported on the pi4 with a 64 bit operating system, but the rpi3b+ from what I understand too can run a 64 bit os, is there anything special about installing on an rpi3b+?

[ptitSeb]

There is nothing special needed. Just build with generic arm configuration and you should have a working build.

[ptitSeb]

That sound like a storage issue. Did you have enough space on your sdcard? And what type of partition format is this? Ext2/Ext4/file2fs/other?
I never had any issue like this on my side on any platform I installed steam.

[ptitSeb]

Also, make sure your box86 is up to date.

[DotJARgon]

So I just double checked, I just used the normal rpi installer for the 32 bit platform since 64 wouldn't go anywhere, my sd card is a 64 gb one, with a 2gb swap space (since i kept running into issues with that) and box86 is up to date using the instructions on your GitHub, I even did a git pull and make again and nothing changed

[ptitSeb]

and what df -h gives you?

[DotJARgon]

Filesystem Size Used Avail Use% Mounted on
/dev/root 58G 6.8G 48G 13% /
devtmpfs 333M 0 333M 0% /dev
tmpfs 462M 0 462M 0% /dev/shm
tmpfs 185M 840K 184M 1% /run
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/mmcblk0p1 253M 49M 204M 20% /boot
tmpfs 93M 20K 93M 1% /run/user/1000

This is what it gives me, sorry for the late response I was working all day.

[ptitSeb]

There is no reason for steam installation to fail, unless there is some physical issue with the sdcard. You should remove all traces of steam (look in ~/.local/share/Steam ) and try again with latest version of box86. If you have error, check with dmesg (or sudo dmesg) if you see some error accessing the sdcard.

[DotJARgon]

I removed steam, then installed it again, but before doing so I added i386 and it worked, not sure if that was the problem or not, but hopefully that might help anyone who looks at this