Bootup issue with sm8750-mtp #81
Description
Observing that Pakala device is not booting.
[ 1.152463] arm-smmu 15000000.iommu: coherent table walk
[ 1.152464] arm-smmu 15000000.iommu: stream matching with 132 register groups
[ 1.152474] arm-smmu 15000000.iommu: 83 context banks (0 stage-2 only)
[ 1.152485] arm-smmu 15000000.iommu: Limiting the stream matching groups to 128
[ 1.152605] qcom-pcie 1c00000.pcie: supply vddpe-3v3 not found, using dummy regulator
[ 1.152705] vreg_s3g_1p8: Setting 1856000-2000000uV
[ 1.152807] vreg_s4g_0p75: Setting 300000-900000uV
[ 1.152890] vreg_l1g_0p91: Setting 912000-936000uV
[ 1.152972] vreg_l2g_1p8: Setting 1200000-1860000uV
[ 1.153065] vreg_l3g_1p2: Setting 1200000-1256000uV
[ 1.153770] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
[ 1.153772] arm-smmu 15000000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 1.153806] arm-smmu 15000000.iommu: preserved 0 boot mappings
[ 1.154634] vreg_s3j_1p1: Setting 1000000-1100000uV
[ 1.156664] platform 8c0000.geniqup: Adding to iommu group 0
[ 1.156715] platform ac0000.geniqup: Adding to iommu group 1
[ 1.156793] platform 1dc4000.dma-controller: Adding to iommu group 2
[ 1.156851] platform 1dfa000.crypto: Adding to iommu group 2
[ 1.156965] platform 1d84000.ufs: Adding to iommu group 3
[ 1.157135] qcom-pcie 1c00000.pcie: host bridge /soc@0/pcie@1c00000 ranges:
[ 1.157934] bam-dma-engine 1dc4000.dma-controller: num-channels unspecified in dt
[ 1.157935] bam-dma-engine 1dc4000.dma-controller: probe with driver bam-dma-engine failed with error -22
[ 1.158683] 898000.serial: ttyHS1 at MMIO 0x898000 (irq = 139, base_baud = 0) is a MSM
[ 1.158904] serial serial0: tty port ttyHS1 registered
[ 1.159078] vreg_l1j_0p91: Setting 880000-920000uV
[ 1.159563] a9c000.serial: ttyMSM0 at MMIO 0xa9c000 (irq = 140, base_baud = 0) is a MSM
[ 1.163368] qcom-pcie 1c00000.pcie: IO 0x0040200000..0x00402fffff -> 0x0000000000
[ 1.169029] vreg_l2j_1p2: Setting 1200000-1200000uV
[ 1.176327] qcom-pcie 1c00000.pcie: MEM 0x0040300000..0x0063ffffff -> 0x0040300000
[ 1.350278] qcom-pcie 1c00000.pcie: MEM 0x0400000000..0x06ffffffff -> 0x0400000000
[ 1.350297] qcom-pcie 1c00000.pcie: Memory resource size exceeds max for 32 bits
[ 1.366168] printk: legacy console [ttyMSM0] enabled
[ 1.366168] printk: legacy console [ttyMSM0] enabled
[ 1.376382] printk: legacy bootconsole [qcom_geni0] disabled
[ 1.376382] printk: legacy bootconsole [qcom_geni0] disabled
[ 1.397237] vreg_bob1: Setting 3008000-4000000uV
[ 1.397799] vreg_s5f_0p85: Setting 852000-1000000uV
[ 1.402876] vreg_bob2: Setting 2704000-3008000uV
[ 1.407144] vreg_l1f_0p88: Setting 880000-920000uV
[ 1.412393] vreg_l1b_1p8: Setting 1800000-1800000uV
[ 1.416822] vreg_l2f_1p2: Setting 1200000-1200000uV
[ 1.421846] vreg_l2b_3p0: Setting 3008000-3048000uV
[ 1.426879] vreg_l3f_1p8: Setting 1800000-1800000uV
[ 1.431875] vreg_l4b_1p8: Setting 1800000-1800000uV
[ 1.441898] vreg_l5b_3p1: Setting 3100000-3148000uV
[ 1.447042] vreg_l6b_1p8: Setting 1800000-3008000uV
[ 1.452139] vreg_l7b_1p8: Setting 1800000-3008000uV
[ 1.457231] vreg_l8b_1p8: Setting 1800000-3008000uV
This issue is not seen after reverting DT chnages merged in 6.18-rc1.
Culprit commit : 141714e