kernel: dtoverlays: Disable kernel drivers for humidity sensor on Sense HATs

See: raspberrypi/linux#6758

kernel: ads7846 touch overlay fixups
See: raspberrypi/linux#6760

kernel: staging: bcm2835-camera: Initialise dev in v4l2_dev
See: raspberrypi/linux#6754

kernel: media: i2c: imx415: Correct hmax_min values for 891Mbps/lane
See: raspberrypi/linux#6750

kernel: PCI: pcie-brcmstb: fake MSIx support on internal MSI target
See: raspberrypi/linux#6761

kernel: DRM fixes for cropping P030/SAND128 on Pi5
See: raspberrypi/linux#6741

kernel: Show process name in set_mempolicy() ignored message
See: raspberrypi/linux#6762

Author: popcornmix

boot/kernel.img

@@ -602,6 +602,8 @@ Params: cs                      SPI bus Chip Select (default 1)
         pmax                    Maximum reported pressure value (default 65535)
         xohms                   Touchpanel sensitivity (X-plate resistance)
                                 (default 400)
+        invx                    Invert x axis
+        invy                    Invert y axis
 
         penirq is required and usually xohms (60-100) has to be set as well.
         Apart from that, pmax (255) and swapxy are also common.
@@ -2871,6 +2873,9 @@ Params: addr                    Set I2C address of sensor. Valid values are
         cam0                    Adopt the default configuration for CAM0 on a
                                 Compute Module (CSI0, i2c_vc, and cam0_reg).
         vcm                     Enable ad5398 VCM associated with the sensor.
+        clk-37125               Alternative to clock-frequency=37125000 and
+                                link-frequency=445500000 for Waveshare modules
+                                with 37.125MHz clock sources.
 
 
 Name:   imx462