kernel: Bump to 6.12.25

kernel: lockdep fixes for imx708 and imx477
See: raspberrypi/linux#6813

kernel: drm/vc4: plane: Fix incorrect handling of GEN_6_D in vc4_plane_async_set_fb
See: raspberrypi/linux#6811

kernel: configs: Enable UNICODE support (for filesystems)
See: raspberrypi/linux#6809

kernel: configs: Enable the EROFS read-only filesystem
See: raspberrypi/linux#6806

kernel: overlays: Add aht20 support to i2c-sensor
See: raspberrypi/linux#6805

kernel: 6.12/iob/topic/imx335
See: raspberrypi/linux#6804

kernel: hwmon: aht10: Fix AHT20 initialization
See: raspberrypi/linux#6803

kernel: drm/vc4: plane: Use nearest neighbour filter with YUV444 workaround
See: raspberrypi/linux#6796

kernel: dtoverlays: Create Pi5 variant of tc358743 overlay
See: raspberrypi/linux#6795

kernel: usb: xhci: default to Intel scheme for calculating U1/U2 timeouts
See: raspberrypi/linux#6794

kernel: Add TCS3472 and VEML6040 sensor support (and a few others)
See: raspberrypi/linux#6448

kernel: drm/vc4: plane: Increase UPM allocation size for YUV444
See: raspberrypi/linux#6791

kernel: media: i2c: imx219: Restore the 1920x1080 to using a 1:1 PAR
See: raspberrypi/linux#6793

Author: popcornmix

boot/kernel.img

@@ -2427,6 +2427,9 @@ Params: addr                    Set the address for the ADT7410, AS73211,
         aht10                   Select the Aosong AHT10 temperature and humidity
                                 sensor
 
+        aht20                   Select the Aosong AHT20 temperature and humidity
+                                sensor
+
         as73211                 Select the AMS AS73211 XYZ true color sensor
                                 Valid addresses 0x74-0x77, default 0x74
 
@@ -2564,12 +2567,18 @@ Params: addr                    Set the address for the ADT7410, AS73211,
         sgp30                   Select the Sensirion SGP30 VOC sensor.
                                 Fixed address 0x58.
 
+        tcs3472                 Select the AMS TAOS TCS3472 family of RGBW light
+                                sensors.
+                                Valid addresses 0x48-0x4b, default 0x48
+
         tmp102                  Select the Texas Instruments TMP102 temp sensor
                                 Valid addresses 0x48-0x4b, default 0x48
 
         tsl4531                 Select the AMS TSL4531 digital ambient light
                                 sensor
 
+        veml6040                Select the Vishay VEML6040 RGBW light sensor
+
         veml6070                Select the Vishay VEML6070 ultraviolet light
                                 sensor
 
@@ -2754,7 +2763,7 @@ Params: rotation                Mounting rotation of the camera sensor (0 or
                                 Compute Module (CSI0, i2c_vc, and cam0_reg).
         vcm                     Configure a VCM focus drive on the sensor.
         4lane                   Enable 4 CSI2 lanes. This requires a Compute
-                                Module (1, 3, or 4).
+                                Module (1, 3, 4, or 5) or Pi 5.
 
 
 Name:   imx290
@@ -2763,7 +2772,7 @@ Info:   Sony IMX290 camera module.
         variants.
 Load:   dtoverlay=imx290,<param>
 Params: 4lane                   Enable 4 CSI2 lanes. This requires a Compute
-                                Module (1, 3, or 4).
+                                Module (1, 3, 4, or 5) or Pi 5.
         clock-frequency         Sets the clock frequency to match that used on
                                 the board.
                                 Modules from Vision Components use 37.125MHz
@@ -2806,7 +2815,7 @@ Info:   Sony IMX327 camera module.
         variants.
 Load:   dtoverlay=imx327,<param>
 Params: 4lane                   Enable 4 CSI2 lanes. This requires a Compute
-                                Module (1, 3, or 4).
+                                Module (1, 3, 4, or 5) or Pi 5.
         clock-frequency         Sets the clock frequency to match that used on
                                 the board.
                                 Modules from Vision Components use 37.125MHz
@@ -2823,6 +2832,25 @@ Params: 4lane                   Enable 4 CSI2 lanes. This requires a Compute
                                 Compute Module (CSI0, i2c_vc, and cam0_reg).
 
 
+Name:   imx335
+Info:   Sony IMX335 camera module.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=imx335,<param>
+Params: orientation             Sensor orientation (0 = front, 1 = rear,
+                                2 = external, default external)
+        rotation                Mounting rotation of the camera sensor (0 or
+                                180, default 0)
+        media-controller        Configure use of Media Controller API for
+                                configuring the sensor (default on)
+        link-frequency          Allowable link frequency values to use in Hz:
+                                594000000 (default), 445500000.
+        cam0                    Adopt the default configuration for CAM0 on a
+                                Compute Module (CSI0, i2c_vc, and cam0_reg).
+        4lane                   Enable 4 CSI2 lanes. This requires a Compute
+                                Module (1, 3, 4, or 5) or Pi 5.
+
+
 Name:   imx378
 Info:   Sony IMX378 camera module.
         Uses Unicam 1, which is the standard camera connector on most Pi
@@ -5056,6 +5084,21 @@ Load:   dtoverlay=tc358743-audio,<param>=<val>
 Params: card-name               Override the default, "tc358743", card name.
 
 
+Name:   tc358743-pi5
+Info:   Toshiba TC358743 HDMI to CSI-2 bridge chip for Pi5.
+        Uses Unicam 1, which is the standard camera connector on most Pi
+        variants.
+Load:   dtoverlay=tc358743-pi5,<param>=<val>
+Params: 4lane                   Use 4 lanes (only applicable to Compute Modules
+                                CAM1 connector).
+
+        link-frequency          Set the link frequency. Only values of 297000000
+                                (574Mbit/s) and 486000000 (972Mbit/s - default)
+                                are supported by the driver.
+        cam0                    Adopt the default configuration for CAM0 on a
+                                Compute Module (CSI0, i2c_vc, and cam0_reg).
+
+
 Name:   tinylcd35
 Info:   3.5" Color TFT Display by www.tinylcd.com
         Options: Touch, RTC, keypad