overlays: sc16is75x: Disable spidev0 first

Ensure spidev0 is disabled before the cs pin is referenced.
Otherwise the overlay will fail when loaded during runtime with

"spi spi0.0: chipselect 0 already in use"

Signed-off-by: Nicolai Buchwitz <[email protected]>

Author: nbuchwitz

arch/arm/boot/dts/overlays/sc16is750-spi0-overlay.dts

@@ -5,6 +5,13 @@
 	compatible = "brcm,bcm2835";
 
 	fragment@0 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@1 {
 		target = <&spi0>;
 		__overlay__ {
 			#address-cells = <1>;
@@ -26,13 +33,6 @@
 		};
 	};
 
-	fragment@1 {
-		target = <&spidev0>;
-		__overlay__ {
-			status = "disabled";
-		};
-	};
-
 	fragment@2 {
 		target-path = "/";
 		__overlay__ {

arch/arm/boot/dts/overlays/sc16is752-spi0-overlay.dts

@@ -5,6 +5,13 @@
 	compatible = "brcm,bcm2835";
 
 	fragment@0 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@1 {
 		target = <&spi0>;
 		__overlay__ {
 			#address-cells = <1>;
@@ -26,13 +33,6 @@
 		};
 	};
 
-	fragment@1 {
-		target = <&spidev0>;
-		__overlay__ {
-			status = "disabled";
-		};
-	};
-
 	fragment@2 {
 		target-path = "/";
 		__overlay__ {