enable 6 chip selects on SPI0

Author: jsarrett

arch/arm/boot/dts/overlays/Makefile

@@ -265,6 +265,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	spi0-1cs.dtbo \
 	spi0-1cs-inverted.dtbo \
 	spi0-2cs.dtbo \
+	spi0-6cs.dtbo \
 	spi1-1cs.dtbo \
 	spi1-2cs.dtbo \
 	spi1-3cs.dtbo \

arch/arm/boot/dts/overlays/spi0-6cs-overlay.dts

@@ -0,0 +1,79 @@
+/dts-v1/;
+/plugin/;
+
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spi0_cs_pins>;
+		frag0: __overlay__ {
+			brcm,pins = <8 13 16 17 18 19>;
+		};
+	};
+
+	fragment@1 {
+		target = <&spi0>;
+		frag1: __overlay__ {
+			cs-gpios = <&gpio 8 1>, <&gpio 13 1>, <&gpio 16 1>, <&gpio 17 1>, <&gpio 18 1>, <&gpio 19 1>;
+			status = "okay";
+		};
+	};
+
+	fragment@2 {
+		target = <&spi0_pins>;
+		__dormant__ {
+			brcm,pins = <9 10 11>;
+		};
+	};
+
+    fragment@3 {
+        target = <&spi0>;
+        frag3: __overlay__ {
+            spidev2: spidev@2 {
+                compatible = "spidev";
+                reg = <2>;	/* CE2 */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                spi-max-frequency = <125000000>;
+            };
+            spidev3: spidev@3 {
+                compatible = "spidev";
+                reg = <3>;	/* CE3 */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                spi-max-frequency = <125000000>;
+            };
+            spidev4: spidev@4 {
+                compatible = "spidev";
+                reg = <4>;	/* CE4 */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                spi-max-frequency = <125000000>;
+            };
+            spidev5: spidev@5 {
+                compatible = "spidev";
+                reg = <5>;	/* CE5 */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                spi-max-frequency = <125000000>;
+            };
+        };
+    };
+
+	__overrides__ {
+		cs0_pin  = <&frag0>,"brcm,pins:0",
+			   <&frag1>,"cs-gpios:4";
+		cs1_pin  = <&frag0>,"brcm,pins:4",
+			   <&frag1>,"cs-gpios:16";
+		cs2_pin  = <&frag0>,"brcm,pins:8",
+			   <&frag1>,"cs-gpios:28";
+		cs3_pin  = <&frag0>,"brcm,pins:12",
+			   <&frag1>,"cs-gpios:40";
+		cs4_pin  = <&frag0>,"brcm,pins:16",
+			   <&frag1>,"cs-gpios:52";
+		cs5_pin  = <&frag0>,"brcm,pins:20",
+			   <&frag1>,"cs-gpios:64";
+		no_miso = <0>,"=2";
+	};
+};