irqchip/irq-brcmstb-l2: Add config for 2711 controller

We currently see these regularly:
[   25.157560] irq 31, desc: 00000000c15e6d2c, depth: 0, count: 0, unhandled: 0
[   25.164658] ->handle_irq():  00000000b1775675, brcmstb_l2_intc_irq_handle+0x0/0x1a8
[   25.172352] ->irq_data.chip(): 00000000fea59f1c, gic_chip_mode1+0x0/0x108
[   25.179166] ->action(): 000000003eda6d6f
[   25.183096] ->action->handler(): 000000002c09e646, bad_chained_irq+0x0/0x58
[   25.190084]      IRQ_LEVEL set
[   25.193142]    IRQ_NOPROBE set
[   25.196198]  IRQ_NOREQUEST set
[   25.199255]   IRQ_NOTHREAD set

with:
$ cat /proc/interrupts  | grep 31:
 31:          1          0          0          0     GICv2 129 Level     (null)

The interrupt is described in DT with IRQ_TYPE_LEVEL_HIGH

But the current compatible string uses the controller in edge triggered mode
(as that config matches our register layout).

Add a new compatible structure for level driven interrupt with our register layout.

We had already been using this compatible string in device tree, so no change needed
there.

Signed-off-by: Dom Cobley <[email protected]>

Author: popcornmix

drivers/irqchip/irq-brcmstb-l2.c

@@ -51,6 +51,16 @@ static const struct brcmstb_intc_init_params l2_lvl_intc_init = {
 	.cpu_mask_clear		= 0x0C
 };
 
+/* Register offsets in the 2711 L2 level interrupt controller */
+static const struct brcmstb_intc_init_params l2_2711_lvl_intc_init = {
+	.handler		= handle_level_irq,
+	.cpu_status		= 0x00,
+	.cpu_clear		= 0x08,
+	.cpu_mask_status	= 0x0c,
+	.cpu_mask_set		= 0x10,
+	.cpu_mask_clear		= 0x14
+};
+
 /* L2 intc private data structure */
 struct brcmstb_l2_intc_data {
 	struct irq_domain *domain;
@@ -266,11 +276,17 @@ static int brcmstb_l2_lvl_intc_probe(struct platform_device *pdev, struct device
 	return brcmstb_l2_intc_probe(pdev, parent, &l2_lvl_intc_init);
 }
 
+static int brcmstb_l2_2711_lvl_intc_probe(struct platform_device *np, struct device_node *parent)
+{
+	return brcmstb_l2_intc_probe(np, parent, &l2_2711_lvl_intc_init);
+}
+
 IRQCHIP_PLATFORM_DRIVER_BEGIN(brcmstb_l2)
 IRQCHIP_MATCH("brcm,l2-intc", brcmstb_l2_edge_intc_probe)
 IRQCHIP_MATCH("brcm,hif-spi-l2-intc", brcmstb_l2_edge_intc_probe)
 IRQCHIP_MATCH("brcm,upg-aux-aon-l2-intc", brcmstb_l2_edge_intc_probe)
 IRQCHIP_MATCH("brcm,bcm7271-l2-intc", brcmstb_l2_lvl_intc_probe)
+IRQCHIP_MATCH("brcm,bcm2711-l2-intc", brcmstb_l2_2711_lvl_intc_probe)
 IRQCHIP_PLATFORM_DRIVER_END(brcmstb_l2)
 MODULE_DESCRIPTION("Broadcom STB generic L2 interrupt controller");
 MODULE_LICENSE("GPL v2");