overlays: Fix some unusable fragments

A forthcoming overlaycheck update looks for dormant fragments with no
parameters to enable them. The test discovered some real errors, which
this patch fixes, and one case where some fragments aren't yet being
used, which this comments out until they are.

Signed-off-by: Phil Elwell <[email protected]>

Author: pelwell

arch/arm/boot/dts/overlays/rpi-poe-overlay.dts

@@ -145,7 +145,7 @@
 		poe_fan_temp2_hyst =	<&trip2>,"hysteresis:0";
 		poe_fan_temp3 =		<&trip3>,"temperature:0";
 		poe_fan_temp3_hyst =	<&trip3>,"hysteresis:0";
-		i2c =			<0>, "+5+6",
+		i2c =			<0>, "+7+8",
 					<&fwpwm>,"status=disabled",
 					<&i2c_bus>,"status=okay",
 					<&poe_mfd>,"status=okay",

arch/arm/boot/dts/overlays/rpi-poe-plus-overlay.dts

@@ -28,7 +28,7 @@
 	};
 
 	__overrides__ {
-		i2c =	<0>, "+5+6",
+		i2c =	<0>, "+7+8",
 			<&fwpwm>,"status=disabled",
 			<&rpi_poe_power_supply>,"status=disabled",
 			<&i2c_bus>,"status=okay",

arch/arm/boot/dts/overlays/sx150x-overlay.dts

@@ -1681,7 +1681,7 @@
 		sx1507-1-3E-int-gpio = <0>,"+67+99",  <&sx150x_1_3E_pins>,"brcm,pins:0", <&sx1507_1_3E>,"interrupts:0";
 		sx1507-0-3F-int-gpio = <0>,"+68+100", <&sx150x_0_3F_pins>,"brcm,pins:0", <&sx1507_0_3F>,"interrupts:0";
 		sx1507-1-3F-int-gpio = <0>,"+69+101", <&sx150x_1_3F_pins>,"brcm,pins:0", <&sx1507_1_3F>,"interrupts:0";
-		sx1507-0-70-int-gpio = <0>,"+60+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0";
+		sx1507-0-70-int-gpio = <0>,"+70+102", <&sx150x_0_70_pins>,"brcm,pins:0", <&sx1507_0_70>,"interrupts:0";
 		sx1507-1-70-int-gpio = <0>,"+71+103", <&sx150x_1_70_pins>,"brcm,pins:0", <&sx1507_1_70>,"interrupts:0";
 		sx1507-0-71-int-gpio = <0>,"+72+104", <&sx150x_0_71_pins>,"brcm,pins:0", <&sx1507_0_71>,"interrupts:0";
 		sx1507-1-71-int-gpio = <0>,"+73+105", <&sx150x_1_71_pins>,"brcm,pins:0", <&sx1507_1_71>,"interrupts:0";

arch/arm/boot/dts/overlays/vc4-kms-dpi-panel-overlay.dts

@@ -42,24 +42,28 @@
 			pinctrl-0 = <&dpi_18bit_gpio0>;
 		};
 	};
+#if 0
 	fragment@92 {
 		target = <&dpi>;
 		__dormant__  {
 			pinctrl-0 = <&dpi_gpio0>;
 		};
 	};
+#endif
 	fragment@93 {
 		target = <&dpi>;
 		__dormant__  {
 			pinctrl-0 = <&dpi_16bit_cpadhi_gpio0>;
 		};
 	};
+#if 0
 	fragment@94 {
 		target = <&dpi>;
 		__dormant__  {
 			pinctrl-0 = <&dpi_16bit_gpio0>;
 		};
 	};
+#endif
 
 	__overrides__ {
 		at056tn53v1 = <0>, "+0+90";