Merge branch 'rpi-6.6.y' into rpi-6.6.y-imx477

Author: pelwell

Documentation/admin-guide/media/building.rst

@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:

Documentation/admin-guide/media/saa7134.rst

@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to

Documentation/arch/arm64/silicon-errata.rst

@@ -244,8 +244,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip08 SMMU PMCG | #162001900      | N/A                         |
-|                | Hip09 SMMU PMCG |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |

Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml

@@ -87,7 +87,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   ports:
     description:

Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml

@@ -27,14 +27,16 @@ properties:
       - description: core0 register (required)
       - description: GCA cache controller register (if GCA controller present)
       - description: bridge register (if no external reset controller)
+      - description: SMS register (if SMS controller present)
     minItems: 2
 
   reg-names:
     items:
       - const: hub
       - const: core0
-      - enum: [ bridge, gca ]
-      - enum: [ bridge, gca ]
+      - enum: [ bridge, gca, sms ]
+      - enum: [ bridge, gca, sms ]
+      - enum: [ bridge, gca, sms ]
     minItems: 2
 
   interrupts:

Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml

@@ -27,7 +27,7 @@ properties:
     description: |
       For multicolor LED support this property should be defined as either
       LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-      include/linux/leds/common.h.
+      include/dt-bindings/leds/common.h.
     enum: [ 8, 9 ]
 
 required:

Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml

@@ -30,6 +30,8 @@ properties:
           - sony,imx290lqr # Colour
           - sony,imx290llr # Monochrome
           - sony,imx327lqr # Colour
+          - sony,imx462lqr # Colour
+          - sony,imx462llr # Monochrome
       - const: sony,imx290
         deprecated: true
 

Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml

@@ -50,15 +50,15 @@ properties:
     minimum: 0
     maximum: 1
 
-  rohm,charger-sense-resistor-ohms:
-    minimum: 10000000
-    maximum: 50000000
+  rohm,charger-sense-resistor-micro-ohms:
+    minimum: 10000
+    maximum: 50000
     description: |
-      BD71827 and BD71828 have SAR ADC for measuring charging currents.
-      External sense resistor (RSENSE in data sheet) should be used. If
-      something other but 30MOhm resistor is used the resistance value
-      should be given here in Ohms.
-    default: 30000000
+      BD71815 has SAR ADC for measuring charging currents. External sense
+      resistor (RSENSE in data sheet) should be used. If something other
+      but a 30 mOhm resistor is used the resistance value should be given
+      here in micro Ohms.
+    default: 30000
 
   regulators:
     $ref: ../regulator/rohm,bd71815-regulator.yaml
@@ -67,7 +67,7 @@ properties:
 
   gpio-reserved-ranges:
     description: |
-      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      Usage of BD71815 GPIO pins can be changed via OTP. This property can be
       used to mark the pins which should not be configured for GPIO. Please see
       the ../gpio/gpio.txt for more information.
 
@@ -113,7 +113,7 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
 
-            rohm,charger-sense-resistor-ohms = <10000000>;
+            rohm,charger-sense-resistor-micro-ohms = <10000>;
 
             regulators {
                 buck1: buck1 {

Documentation/devicetree/bindings/mmc/mmc-controller.yaml

@@ -25,7 +25,7 @@ properties:
   "#address-cells":
     const: 1
     description: |
-      The cell is the slot ID if a function subnode is used.
+      The cell is the SDIO function number if a function subnode is used.
 
   "#size-cells":
     const: 0

Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml

@@ -31,10 +31,6 @@ properties:
         $ref: regulator.yaml#
         unevaluatedProperties: false
 
-        properties:
-          regulator-compatible:
-            pattern: "^vbuck[1-4]$"
-
     additionalProperties: false
 
 required:
@@ -52,15 +48,13 @@ examples:
 
       regulators {
         vbuck1 {
-          regulator-compatible = "vbuck1";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
           regulator-allowed-modes = <0 1 2>;
         };
 
         vbuck3 {
-          regulator-compatible = "vbuck3";
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;