Merge pull request adafruit#9520 from tannewt/rp2350_audio_crash

Switch to pico-sdk style interrupt names.

Author: dhalbert

ports/raspberrypi/Makefile

@@ -145,15 +145,17 @@ $(INC_CYW43) \
 # Pico specific configuration
 CFLAGS += \
 	-DRASPBERRYPI \
+	-DLIB_PICO_MULTICORE=1 \
+	-DPICO_NO_HARDWARE=0 \
 	-DPICO_ON_DEVICE=1 \
+	-DPICO_BUILD=1 \
 	-DPICO_NO_BINARY_INFO=0 \
 	-DPICO_TIME_DEFAULT_ALARM_POOL_DISABLED=0 \
 	-DPICO_DIVIDER_CALL_IDIV0=0 \
 	-DPICO_DIVIDER_CALL_LDIV0=0 \
 	-DPICO_DIVIDER_HARDWARE=1 \
 	-DPICO_DOUBLE_ROM=1 \
 	-DPICO_FLOAT_ROM=1 \
-	-DLIB_PICO_MULTICORE=1 \
 	-DPICO_BITS_IN_RAM=0 \
 	-DPICO_DIVIDER_IN_RAM=0 \
 	-DPICO_DOUBLE_PROPAGATE_NANS=0 \
@@ -177,7 +179,9 @@ CFLAGS += \
 	-DCFG_TUD_CDC_RX_BUFSIZE=256 \
 	-DCFG_TUD_MIDI_TX_BUFSIZE=128 \
 	-DCFG_TUD_CDC_TX_BUFSIZE=256 \
-	-DCFG_TUD_MSC_BUFSIZE=1024
+	-DCFG_TUD_MSC_BUFSIZE=1024 \
+	-DPICO_RP2040_USB_DEVICE_UFRAME_FIX=1 \
+	-DPICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1 \
 
 # option to override default optimization level, set in boards/$(BOARD)/mpconfigboard.mk
 CFLAGS += $(OPTIMIZATION_FLAGS)

ports/raspberrypi/audio_dma.c

@@ -16,6 +16,8 @@
 #include "py/runtime.h"
 
 #include "src/rp2_common/hardware_irq/include/hardware/irq.h"
+#include "hardware/regs/intctrl.h" // For isr_ macro.
+
 
 #if CIRCUITPY_AUDIOCORE
 
@@ -459,7 +461,7 @@ static void dma_callback_fun(void *arg) {
     }
 }
 
-void isr_dma_0(void) {
+void __not_in_flash_func(isr_dma_0)(void) {
     for (size_t i = 0; i < NUM_DMA_CHANNELS; i++) {
         uint32_t mask = 1 << i;
         if ((dma_hw->intr & mask) == 0) {

ports/raspberrypi/sdk_config/pico/config_autogen.h

@@ -1,32 +1,3 @@
 #pragma once
 
-#include "pico-sdk-configboard.h"
-
-// alphabetized
-#define LIB_CMSIS_CORE      (1)
-#define LIB_PICO_BINARY_INFO (0)
-#define LIB_PICO_PRINTF_NONE (0)
-#define LIB_PICO_PRINTF_PICO (0)
-#define LIB_PICO_STDIO_SEMIHOSTING (0)
-#define LIB_PICO_STDIO_UART (0)
-#define LIB_PICO_STDIO_USB (0)
-#define PICO_DIVIDER_DISABLE_INTERRUPTS (0)
-#define PICO_DOUBLE_SUPPORT_ROM_V1 (1)
-#define PICO_ENTER_USB_BOOT_ON_EXIT (0)
-#define PICO_FLOAT_SUPPORT_ROM_V1 (1)
-#define PICO_IE_26_29_UNCHANGED_ON_RESET (0)
-#define PICO_INT64_OPS_IN_RAM (0)
-#define PICO_NO_HARDWARE (0)
-#define PICO_ON_DEVICE (1)
-#define PICO_PRINTF_ALWAYS_INCLUDED (1)
-#define PICO_RP2040_USB_DEVICE_ENUMERATION_FIX (1)
-#define PICO_RP2040_USB_DEVICE_UFRAME_FIX (1)
-#define PICO_STDIO_IGNORE_NESTED_STDOUT (0)
-#define PICO_USE_CRT_PRINTF (0)
-#define PICO_USE_OPTIMISTIC_SBRK (0)
-// Stack guards cause a hard fault when 32 bytes around the stack bottom are
-// accessed. These backtraces aren't always helpful and this conflicts with our
-// own stack checking.
-#define PICO_USE_STACK_GUARDS (0)
-
 #include "include/cmsis/rename_exceptions.h"

ports/raspberrypi/sdk_config/pico/version.h

@@ -11,9 +11,9 @@
 #ifndef _PICO_VERSION_H
 #define _PICO_VERSION_H
 
-#define PICO_SDK_VERSION_MAJOR    1
-#define PICO_SDK_VERSION_MINOR    2
+#define PICO_SDK_VERSION_MAJOR    2
+#define PICO_SDK_VERSION_MINOR    0
 #define PICO_SDK_VERSION_REVISION 0
-#define PICO_SDK_VERSION_STRING   "1.2.0"
+#define PICO_SDK_VERSION_STRING   "2.0.0"
 
 #endif

ports/raspberrypi/supervisor/port.c

@@ -510,8 +510,8 @@ void port_idle_until_interrupt(void) {
 /**
  * \brief Default interrupt handler for unused IRQs.
  */
-extern void HardFault_Handler(void); // provide a prototype to avoid a missing-prototypes diagnostic
-__attribute__((used)) void __not_in_flash_func(HardFault_Handler)(void) {
+extern void isr_hardfault(void); // provide a prototype to avoid a missing-prototypes diagnostic
+__attribute__((used)) void __not_in_flash_func(isr_hardfault)(void) {
     // Only safe mode from core 0 which is running CircuitPython. Core 1 faulting
     // should not be fatal to CP. (Fingers crossed.)
     if (get_core_num() == 0) {