RSKRX130 Sample configuration

Followings are hardware connection for RSKRX130, for more detail, please visit RSKRX130 - Quick Start Guide and RSKRX130 - User's Manual

Use Debug On-Board

• Hardware connection for GPIO samples

  • Blinky (samples/basic/blinky): Simple LED blinky

    • Build command: $ west build -b rsk_rx130@512kb -p always samples/basic/blinky
    • HW configuration: No additional connection.

  • Button (samples/basic/button): Simple button test

    • Build command: $ west build -b rsk_rx130@512kb -p always samples/basic/button
    • HW configuration: No additional connection.

  • zTest (tests/drivers/gpio/gpio_basic_api): Loopback for out-gpios and in-gpios

    • Build command: $ west build -b rsk_rx130@512kb -p always samples/basic/button

    • HW configuration:

      Board	Pin function	Pin
      RSK_RX130_512KB	out-gpios	PD1
      	in-gpios	PD2

• Hardware connection for UART samples

  • echo_bot (samples/drivers/uart/echo_bot): No additional connection.

  • zTest (tests/drivers/uart/uart_basic_api): No additional connection.

  • zTest (tests/drivers/uart/uart_async_api): Loopback for TXD and RXD

    Board	Channel	Pin function	Pin
    RSK_RX130_512KB	SCI1	TXD1	P26
    		RXD1	P30

• Hardware connection for SPI samples

  • zTest spi_loopback (tests/drivers/spi/spi_loopback): Loopback MISOA and MOSIA

    Board	Channel	Pin function	Pin
    RSK_RX130_512KB	RSPI0	MISOA	PA7
    		MOSIA	PA6

• Hardware connection for I2C samples

  • zTest i2c_api (tests/drivers/i2c/i2c_api): Require GY-271 QMC5883L module

    GY271	RSK_RX130_512KB
    VCC	P3V3
    GND	GND
    SCL	P12 (SCL)
    SDA	P13 (SDA)
    DDBY	-

• Hardware connection for PWM samples

  • zTest pwm_api (tests/drivers/pwm/pwm_api): No additional connection.

  • zTest pwm_loopback (tests/drivers/pwm/pwm_loopback): loopback for pin pwm_out and pwm_in

    Board	Channel	Pin function	Pin
    RSK_RX130_512KB	MTU4	pwm_out	PA0
    	MTU1	pwm_in	P20