Camilladsp Has No Config File

[teslasparks301]

I decided to try using camilladsp on my rAudio1 server and it will not start. My error is:
CamillaDSP Error: /srv/http/data/camilladsp/configs/camilladsp.yml not valid.
Upon investigation I found that only the file was missing but so was the path. Am I supposed to create this file? If so, is there a template? Is rAudio supposed to create it?

My particulars:

rAudio 20240615
6.6.33-1-rpi aarch64
Raspberry Pi 4B Rev 1.1
BCM2711 • 3.7 GiB
4 x Cortex-A72 @ 1.50 GHz

From Config File:

dtoverlay=disable-bt
dtoverlay=disable-wifi
dtoverlay=hifiberry-dacplus
firmware-raspberrypi 20231022-1
linux-firmware 20240610.9c10a208-1
raspberrypi-bootloader 20240612-1

michael

[rern]

Please try:

sed -e '/  Volume:/,/type: Volume/ d
' -e '/- Volume/ d
' /etc/camilladsp/configs/camilladsp.yml > /srv/http/data/camilladsp/configs/camilladsp.yml

or the latest image file.

[teslasparks301]

Thank you. That did the trick. Now to figure out how to use it. ;)

BTW, the editing did nothing. A diff showed input and output files to be identical.

michael

[Lightwel]

Using version 20240710 I have the same problem, but this solution did not work for me. I am using a 2-channel USB DAC which is recognised by rAudio and works without issue.

System RPi4B 8Gb.

[alarm@rAudio ~]$ cat /var/log/camilladsp.log 2024-08-02 16:55:46.217622 INFO [src/bin.rs:683] CamillaDSP version 2.0.3 2024-08-02 16:55:46.217666 INFO [src/bin.rs:684] Running on linux, aarch64 2024-08-02 16:55:46.217736 ERROR [src/bin.rs:814] Could not open config file ''. Error: No such file or directory (os error 2)
`[alarm@rAudio ~]$ cat /srv/http/data/camilladsp/configs/camilladsp.yml

title: ~
description: ~
devices:
samplerate: 44100
chunksize: 2048
queuelimit: 4
silence_threshold: -60.0
silence_timeout: 3.0
capture:
type: Alsa
channels: 2
device: "hw:Loopback,0"
format: S32LE
playback:
type: Alsa
channels: 2
device: "hw:0,0"
format: S16LE
enable_rate_adjust: false
target_level: 2048
adjust_period: 10.0
resampler: ~
capture_samplerate: ~
stop_on_rate_change: false
rate_measure_interval: 3.0
volume_ramp_time: ~
mixers: {}
filters:
Bass:
type: Biquad
description: ~
parameters:
type: Lowshelf
freq: 85.0
q: 0.9
gain: 0.0
Treble:
type: Biquad
description: ~
parameters:
type: Highshelf
freq: 6500.0
q: 0.7
gain: 0.0
processors: ~
pipeline:

• type: Filter
  channel: 0
  names:
  • Bass
  • Treble
    description: ~
    bypassed: ~
• type: Filter
  channel: 1
  names:
  • Bass
  • Treble
    description: ~
    bypassed: ~
    [alarm@rAudio ~]$
    [alarm@rAudio ~]$ cat /srv/http/data/mpdconf/conf/camilladsp.conf
    audio_output {
    name "CamillaDSP"
    device "hw:Loopback,1"
    type "alsa"
    auto_resample "no"
    mixer_type "none"
    }
    [alarm@rAudio ~]$
    `

This is my first foray into camilladsp, which I want to use for room correction via REW.

Any help appreciated.

Tks
R

[Lightwel]

Sorry about the shouting - must have hit a formatting button without noticing :(
R

[Lightwel]

As a double-check I downloaded again the latest release version i20240615 imaged to a new USB and then updated to 20240719. CamillaDSP seems to be working fine. Cannot understand the previous problems.

Best
R