Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent

Pull a single UEFI fix from Ard:

- Reduce the severity of the notice that appears when the ESRT table points
  to memory that is not covered by the memory map. It is scaring our users
  and interfering with their nice splash screens. Note that the ESRT may still
  be perfectly usable, and is currently (to my knowledge) not widely used to
  begin with.

Author: KAGA-KOKO

Documentation/DocBook/Makefile

@@ -7,12 +7,12 @@
 # list of DOCBOOKS.
 
 DOCBOOKS := z8530book.xml  \
-	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
+	    kernel-hacking.xml kernel-locking.xml \
 	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml scsi.xml \
-	    sh.xml regulator.xml w1.xml \
+	    sh.xml w1.xml \
 	    writing_musb_glue_layer.xml
 
 ifeq ($(DOCBOOKS),)

Documentation/PCI/pcieaer-howto.txt

@@ -256,7 +256,7 @@ After reboot with new kernel or insert the module, a device file named
 
 Then, you need a user space tool named aer-inject, which can be gotten
 from:
-    http://www.kernel.org/pub/linux/utils/pci/aer-inject/
+    https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
 
 More information about aer-inject can be found in the document comes
 with its source code.

Documentation/admin-guide/kernel-parameters.txt

@@ -653,6 +653,9 @@
 	cpuidle.off=1	[CPU_IDLE]
 			disable the cpuidle sub-system
 
+	cpufreq.off=1	[CPU_FREQ]
+			disable the cpufreq sub-system
+
 	cpu_init_udelay=N
 			[X86] Delay for N microsec between assert and de-assert
 			of APIC INIT to start processors.  This delay occurs
@@ -1183,6 +1186,12 @@
 			functions that can be changed at run time by the
 			set_graph_notrace file in the debugfs tracing directory.
 
+	ftrace_graph_max_depth=<uint>
+			[FTRACE] Used with the function graph tracer. This is
+			the max depth it will trace into a function. This value
+			can be changed at run time by the max_graph_depth file
+			in the tracefs tracing directory. default: 0 (no limit)
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)

Documentation/arm64/silicon-errata.txt

@@ -68,3 +68,4 @@ stable kernels.
 |                |                 |                 |                             |
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
+| Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |

Documentation/conf.py

@@ -135,7 +135,7 @@
 # If true, `todo` and `todoList` produce output, else they produce nothing.
 todo_include_todos = False
 
-primary_domain = 'C'
+primary_domain = 'c'
 highlight_language = 'none'
 
 # -- Options for HTML output ----------------------------------------------

Documentation/dev-tools/kcov.rst

@@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims
 to collect more or less stable coverage that is function of syscall inputs.
 To achieve this goal it does not collect coverage in soft/hard interrupts
 and instrumentation of some inherently non-deterministic parts of kernel is
-disbled (e.g. scheduler, locking).
+disabled (e.g. scheduler, locking).
 
 Usage
 -----

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -40,6 +40,8 @@ Board compatible values:
   - "hardkernel,odroid-c2" (Meson gxbb)
   - "amlogic,p200" (Meson gxbb)
   - "amlogic,p201" (Meson gxbb)
+  - "wetek,hub" (Meson gxbb)
+  - "wetek,play2" (Meson gxbb)
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)

Documentation/devicetree/bindings/opp/opp.txt

@@ -188,14 +188,14 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 
 		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000 975000 985000>;
+			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
 		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <980000 1000000 1010000>;
+			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
@@ -267,14 +267,14 @@ independently.
 
 		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000 975000 985000>;
+			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
 		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <980000 1000000 1010000>;
+			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
@@ -343,14 +343,14 @@ DVFS state together.
 
 		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000 975000 985000>;
+			opp-microvolt = <975000 970000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
 		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <980000 1000000 1010000>;
+			opp-microvolt = <1000000 980000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
@@ -369,7 +369,7 @@ DVFS state together.
 
 		opp@1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1045000 1050000 1055000>;
+			opp-microvolt = <1050000 1045000 1055000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			opp-suspend;
@@ -382,7 +382,7 @@ DVFS state together.
 		};
 		opp@1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1010000 1100000 1110000>;
+			opp-microvolt = <1100000 1010000 1110000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			turbo-mode;
@@ -424,9 +424,9 @@ Example 4: Handling multiple regulators
 
 		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
-					<960000 965000 975000>, /* Supply 1 */
-					<960000 965000 975000>; /* Supply 2 */
+			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+					<965000 960000 975000>, /* Supply 1 */
+					<965000 960000 975000>; /* Supply 2 */
 			opp-microamp =  <70000>,		/* Supply 0 */
 					<70000>,		/* Supply 1 */
 					<70000>;		/* Supply 2 */
@@ -437,9 +437,9 @@ Example 4: Handling multiple regulators
 
 		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
-					<960000 965000 975000>, /* Supply 1 */
-					<960000 965000 975000>; /* Supply 2 */
+			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+					<965000 960000 975000>, /* Supply 1 */
+					<965000 960000 975000>; /* Supply 2 */
 			opp-microamp =  <70000>,		/* Supply 0 */
 					<0>,			/* Supply 1 doesn't need this */
 					<70000>;		/* Supply 2 */
@@ -474,7 +474,7 @@ Example 5: opp-supported-hw
 			 */
 			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
 			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <900000 915000 925000>;
+			opp-microvolt = <915000 900000 925000>;
 			...
 		};
 
@@ -487,7 +487,7 @@ Example 5: opp-supported-hw
 			 */
 			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <900000 915000 925000>;
+			opp-microvolt = <915000 900000 925000>;
 			...
 		};
 	};
@@ -512,18 +512,18 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 
 		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt-slow = <900000 915000 925000>;
-			opp-microvolt-fast = <970000 975000 985000>;
+			opp-microvolt-slow = <915000 900000 925000>;
+			opp-microvolt-fast = <975000 970000 985000>;
 			opp-microamp-slow =  <70000>;
 			opp-microamp-fast =  <71000>;
 		};
 
 		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
-					      <910000 925000 935000>; /* Supply vcc1 */
-			opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
-					     <960000 965000 975000>; /* Supply vcc1 */
+			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
+					      <925000 910000 935000>; /* Supply vcc1 */
+			opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
+					     <965000 960000 975000>; /* Supply vcc1 */
 			opp-microamp =  <70000>; /* Will be used for both slow/fast */
 		};
 	};

Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt

@@ -45,7 +45,7 @@ Required Properties:
 Optional Properties:
 - reg-names: In addition to the required properties, the following are optional
   - "efuse-address"	- Contains efuse base address used to pick up ABB info.
-  - "ldo-address"	- Contains address of ABB LDO overide register address.
+  - "ldo-address"	- Contains address of ABB LDO override register.
 	"efuse-address" is required for this.
 - ti,ldovbb-vset-mask	- Required if ldo-address is set, mask for LDO override
 	register to provide override vset value.

Documentation/devicetree/bindings/usb/usb251xb.txt

@@ -7,18 +7,18 @@ Required properties :
  - compatible : Should be "microchip,usb251xb" or one of the specific types:
 	"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
 	"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
- - hub-reset-gpios : Should specify the gpio for hub reset
+ - reset-gpios : Should specify the gpio for hub reset
+ - reg : I2C address on the selected bus (default is <0x2C>)
 
 Optional properties :
- - reg : I2C address on the selected bus (default is <0x2C>)
  - skip-config : Skip Hub configuration, but only send the USB-Attach command
- - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424)
- - product-id : USB Product ID of the hub (16 bit, default depends on type)
- - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3)
- - language-id : USB Language ID (16 bit, default is 0x0000)
- - manufacturer : USB Manufacturer string (max 31 characters long)
- - product : USB Product string (max 31 characters long)
- - serial : USB Serial string (max 31 characters long)
+ - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
+ - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
+ - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
+ - language-id : Set USB Language ID (16 bit, default is 0x0000)
+ - manufacturer : Set USB Manufacturer string (max 31 characters long)
+ - product : Set USB Product string (max 31 characters long)
+ - serial : Set USB Serial string (max 31 characters long)
  - {bus,self}-powered : selects between self- and bus-powered operation (default
 	is self-powered)
  - disable-hi-speed : disable USB Hi-Speed support
@@ -31,43 +31,26 @@ Optional properties :
 	(default is individual)
  - dynamic-power-switching : enable auto-switching from self- to bus-powered
 	operation if the local power source is removed or unavailable
- - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms)
- - compound-device : indicated the hub is part of a compound device
+ - oc-delay-us : Delay time (in microseconds) for filtering the over-current
+	sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
+	an invalid value is given, the default is used instead.
+ - compound-device : indicate the hub is part of a compound device
  - port-mapping-mode : enable port mapping mode
  - string-support : enable string descriptor support (required for manufacturer,
 	product and serial string configuration)
  - non-removable-ports : Should specify the ports which have a non-removable
 	device connected.
  - sp-disabled-ports : Specifies the ports which will be self-power disabled
  - bp-disabled-ports : Specifies the ports which will be bus-power disabled
- - max-sp-power : Specifies the maximum current the hub consumes from an
-	upstream port when operating as self-powered hub including the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 2).
- - max-bp-power : Specifies the maximum current the hub consumes from an
-	upstream port when operating as bus-powered hub including the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 100).
- - max-sp-current : Specifies the maximum current the hub consumes from an
-	upstream port when operating as self-powered hub EXCLUDING the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 2).
- - max-bp-current : Specifies the maximum current the hub consumes from an
-	upstream port when operating as bus-powered hub EXCLUDING the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 100).
- - power-on-time : Specifies the time it takes from the time the host initiates
-	the power-on sequence to a port until the port has adequate power. The
-	value is given in ms in a 0 - 510 range (default is 100ms).
+ - power-on-time-ms : Specifies the time it takes from the time the host
+	initiates the power-on sequence to a port until the port has adequate
+	power. The value is given in ms in a 0 - 510 range (default is 100ms).
 
 Examples:
 	usb2512b@2c {
 		compatible = "microchip,usb2512b";
-		hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		reg = <0x2c>;
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	};
 
 	usb2514b@2c {