Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...

Author: torvalds

Documentation/devicetree/bindings/bus/qcom,ebi2.txt

@@ -51,7 +51,7 @@ Required properties:
 - compatible: should be one of:
   "qcom,msm8660-ebi2"
   "qcom,apq8060-ebi2"
-- #address-cells: shoule be <2>: the first cell is the chipselect,
+- #address-cells: should be <2>: the first cell is the chipselect,
   the second cell is the offset inside the memory range
 - #size-cells: should be <1>
 - ranges: should be set to:
@@ -64,7 +64,7 @@ Required properties:
 - reg: two ranges of registers: EBI2 config and XMEM config areas
 - reg-names: should be "ebi2", "xmem"
 - clocks: two clocks, EBI_2X and EBI
-- clock-names: shoule be "ebi2x", "ebi2"
+- clock-names: should be "ebi2x", "ebi2"
 
 Optional subnodes:
 - Nodes inside the EBI2 will be considered device nodes.
@@ -100,7 +100,7 @@ Optional properties arrays for FAST chip selects:
   assertion, with respect to the cycle where ADV (address valid) is asserted.
   2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
 - qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
-  read transfer. For a single read trandfer this will be the time from CS
+  read transfer. For a single read transfer this will be the time from CS
   assertion to OE assertion. Valid values 0 thru 15.
 
 

Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt

@@ -117,7 +117,7 @@ ID	Clock	Peripheral
 25	tdm	Time Division Mplx
 28	xor1	XOR DMA 1
 29	sata1lnk
-30	sata1	SATA Host 0
+30	sata1	SATA Host 1
 
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral

Documentation/devicetree/bindings/display/arm,pl11x.txt

@@ -22,7 +22,7 @@ Required properties:
 
 - clocks: contains phandle and clock specifier pairs for the entries
 	in the clock-names property. See
-	Documentation/devicetree/binding/clock/clock-bindings.txt
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
 
 Optional properties:
 

Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

@@ -33,7 +33,7 @@ Optional properties for dp-controller:
 		in Documentation/devicetree/bindings/media/video-interfaces.txt,
 		please refer to the SoC specific binding document:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------

…cetree/bindings/video/bridge/anx7814.txt …tree/bindings/display/bridge/anx7814.txtDocumentation/devicetree/bindings/video/bridge/anx7814.txt renamed to Documentation/devicetree/bindings/display/bridge/anx7814.txt Documentation/devicetree/bindings/video/bridge/anx7814.txt renamed to Documentation/devicetree/bindings/display/bridge/anx7814.txt

@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/display/display-timing.txt.
+              Documentation/devicetree/bindings/display/panel/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required

…ee/bindings/video/bridge/sil-sii8620.txt …/bindings/display/bridge/sil-sii8620.txtDocumentation/devicetree/bindings/video/bridge/sil-sii8620.txt renamed to Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt renamed to Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt

@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 
 Example:
 

Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/display-timing.txt
+	Documentation/devicetree/bindings/display/panel/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value