Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The diff is dominated by the Allwinner A10/A20 SoCs getting converted
  to the sunxi-ng framework. Otherwise, the heavy hitters are various
  drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
  some other new clk drivers in here too but overall this is just a
  bunch of clk drivers for various different pieces of hardware and a
  collection of non-critical fixes for clk drivers.

  New Drivers:
   - Allwinner R40 SoCs
   - Renesas R-Car Gen3 USB 2.0 clock selector PHY
   - Atmel AT91 audio PLL
   - Uniphier PXs3 SoCs
   - ARC HSDK Board PLLs
   - AXS10X Board PLLs
   - STMicroelectronics STM32H743 SoCs

  Removed Drivers:
   - Non-compiling mb86s7x support

  Updates:
   - Allwinner A10/A20 SoCs converted to sunxi-ng framework
   - Allwinner H3 CPU clk fixes
   - Renesas R-Car D3 SoC
   - Renesas V2H and M3-W modules
   - Samsung Exynos5420/5422/5800 audio fixes
   - Rockchip fractional clk approximation fixes
   - Rockchip rk3126 SoC support within the rk3128 driver
   - Amlogic gxbb CEC32 and sd_emmc clks
   - Amlogic meson8b reset controller support
   - IDT VersaClock 5P49V5925/5P49V6901 support
   - Qualcomm MSM8996 SMMU clks
   - Various 'const' applications for struct clk_ops
   - si5351 PLL reset bugfix
   - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
   - Assorted Tegra clk driver fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
  clk: si5351: fix PLL reset
  ASoC: atmel-classd: remove aclk clock
  ASoC: atmel-classd: remove aclk clock from DT binding
  clk: at91: clk-generated: make gclk determine audio_pll rate
  clk: at91: clk-generated: create function to find best_diff
  clk: at91: add audio pll clock drivers
  dt-bindings: clk: at91: add audio plls to the compatible list
  clk: at91: clk-generated: remove useless divisor loop
  clk: mb86s7x: Drop non-building driver
  clk: ti: check for null return in strrchr to avoid null dereferencing
  clk: Don't write error code into divider register
  clk: uniphier: add video input subsystem clock
  clk: uniphier: add audio system clock
  clk: stm32h7: Add stm32h743 clock driver
  clk: gate: expose clk_gate_ops::is_enabled
  clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
  clk: uniphier: add PXs3 clock data
  clk: hi6220: change watchdog clock source
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  clk: cs2000: Add cs2000_set_saved_rate
  ...

Author: torvalds

Documentation/devicetree/bindings/clock/amlogic,gxbb-aoclkc.txt

@@ -5,9 +5,11 @@ controllers within the Always-On part of the SoC.
 
 Required Properties:
 
-- compatible: should be "amlogic,gxbb-aoclkc"
-- reg: physical base address of the clock controller and length of memory
-       mapped region.
+- compatible: value should be different for each SoC family as :
+	- GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+	- GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+	- GXM (S912) : "amlogic,meson-gxm-aoclkc"
+	followed by the common "amlogic,meson-gx-aoclkc"
 
 - #clock-cells: should be 1.
 
@@ -23,14 +25,22 @@ to specify the reset which they consume. All available resets are defined as
 preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
 used in device tree sources.
 
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
 Example: AO Clock controller node:
 
-	clkc_AO: clock-controller@040 {
-		compatible = "amlogic,gxbb-aoclkc";
-		reg = <0x0 0x040 0x0 0x4>;
+ao_sysctrl: sys-ctrl@0 {
+	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+	reg =  <0x0 0x0 0x0 0x100>;
+
+	clkc_AO: clock-controller {
+		compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+};
 
 Example: UART controller node that consumes the clock and reset generated
   by the clock controller:

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -81,6 +81,16 @@ Required properties:
 	"atmel,sama5d2-clk-generated":
 		at91 generated clock
 
+	"atmel,sama5d2-clk-audio-pll-frac":
+		at91 audio fractional pll
+
+	"atmel,sama5d2-clk-audio-pll-pad":
+		at91 audio pll CLK_AUDIO output pin
+
+	"atmel,sama5d2-clk-audio-pll-pmc"
+		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
+		and can be used by peripheral clock or generic clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).

Documentation/devicetree/bindings/clock/idt,versaclock5.txt

@@ -1,24 +1,32 @@
-Binding for IDT VersaClock5 programmable i2c clock generator.
+Binding for IDT VersaClock 5,6 programmable i2c clock generators.
 
-The IDT VersaClock5 are programmable i2c clock generators providing
-from 3 to 12 output clocks.
+The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
+generators providing from 3 to 12 output clocks.
 
 ==I2C device node==
 
 Required properties:
-- compatible:	shall be one of "idt,5p49v5923" , "idt,5p49v5933" ,
-		"idt,5p49v5935".
+- compatible:	shall be one of
+		"idt,5p49v5923"
+		"idt,5p49v5925"
+		"idt,5p49v5933"
+		"idt,5p49v5935"
+		"idt,5p49v6901"
 - reg:		i2c device address, shall be 0x68 or 0x6a.
 - #clock-cells:	from common clock binding; shall be set to 1.
 - clocks:	from common clock binding; list of parent clock handles,
-		- 5p49v5923: (required) either or both of XTAL or CLKIN
+		- 5p49v5923 and
+		  5p49v5925 and
+		  5p49v6901: (required) either or both of XTAL or CLKIN
 					reference clock.
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present (internal
 					Xtal used) or CLKIN reference
 					clock.
 - clock-names:	from common clock binding; clock input names, can be
-		- 5p49v5923: (required) either or both of "xin", "clkin".
+		- 5p49v5923 and
+		  5p49v5925 and
+		  5p49v6901: (required) either or both of "xin", "clkin".
 		- 5p49v5933 and
 		- 5p49v5935: (optional) property not present or "clkin".
 
@@ -37,13 +45,21 @@ clock specifier, the following mapping applies:
 	1 -- OUT1
 	2 -- OUT4
 
+5P49V5925 and
 5P49V5935:
 	0 -- OUT0_SEL_I2CB
 	1 -- OUT1
 	2 -- OUT2
 	3 -- OUT3
 	4 -- OUT4
 
+5P49V6901:
+	0 -- OUT0_SEL_I2CB
+	1 -- OUT1
+	2 -- OUT2
+	3 -- OUT3
+	4 -- OUT4
+
 ==Example==
 
 /* 25MHz reference crystal */

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt

@@ -22,6 +22,7 @@ Required Properties:
       - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
       - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
       - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
+      - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3)
 
   - reg: Base address and length of the memory resource used by the CPG/MSSR
     block
@@ -30,7 +31,7 @@ Required Properties:
     clock-names
   - clock-names: List of external parent clock names. Valid names are:
       - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
-		 r8a7795, r8a7796)
+		 r8a7795, r8a7796, r8a77995)
       - "extalr" (r8a7795, r8a7796)
       - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794)
 

Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt

@@ -0,0 +1,55 @@
+* Renesas R-Car USB 2.0 clock selector
+
+This file provides information on what the device node for the R-Car USB 2.0
+clock selector.
+
+If you connect an external clock to the USB_EXTAL pin only, you should set
+the clock rate to "usb_extal" node only.
+If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+is not needed because this is default setting. (Of course, you can set the
+clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+Case 1: An external clock connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|External  |---|USB_EXTAL ---> all usb channels|
+	|clock     |   |USB_XTAL                       |
+	+----------+   +-------------------------------+
+In this case, we need this driver with "usb_extal" clock.
+
+Case 2: An oscillator connects to R-Car SoC
+	+----------+   +--- R-Car ---------------------+
+	|Oscillator|---|USB_EXTAL -+-> all usb channels|
+	|          |---|USB_XTAL --+                   |
+	+----------+   +-------------------------------+
+In this case, we don't need this selector.
+
+Required properties:
+- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
+	      an R8A7795 SoC.
+	      "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
+	      an R8A7796 SoC.
+	      "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
+	      compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
+- reg: offset and length of the USB 2.0 clock selector register block.
+- clocks: A list of phandles and specifier pairs.
+- clock-names: Name of the clocks.
+ - The functional clock must be "ehci_ohci"
+ - The USB_EXTAL clock pin must be "usb_extal"
+ - The USB_XTAL clock pin must be "usb_xtal"
+- #clock-cells: Must be 0
+
+Example (R-Car H3):
+
+	usb2_clksel: clock-controller@e6590630 {
+		compatible = "renesas,r8a77950-rcar-usb2-clock-sel",
+			     "renesas,rcar-gen3-usb2-clock-sel";
+		reg = <0 0xe6590630 0 0x02>;
+		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
+		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
+		#clock-cells = <0>;
+	};

Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt

@@ -1,12 +1,14 @@
-* Rockchip RK3128 Clock and Reset Unit
+* Rockchip RK3126/RK3128 Clock and Reset Unit
 
-The RK3128 clock controller generates and supplies clock to various
+The RK3126/RK3128 clock controller generates and supplies clock to various
 controllers within the SoC and also implements a reset controller for SoC
 peripherals.
 
 Required Properties:
 
-- compatible: should be "rockchip,rk3128-cru"
+- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
+  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
+  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
 - reg: physical base address of the controller and length of memory mapped
   region.
 - #clock-cells: should be 1.

Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt

@@ -0,0 +1,28 @@
+Binding for the HSDK Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-<name>-pll-clock"
+  "snps,hsdk-core-pll-clock"
+  "snps,hsdk-gp-pll-clock"
+  "snps,hsdk-hdmi-pll-clock"
+- reg : should contain base register location and length.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input_clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	cpu_clk: cpu-clk@0 {
+		compatible = "snps,hsdk-core-pll-clock";
+		reg = <0x00 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input_clk>;
+	};

Documentation/devicetree/bindings/clock/snps,pll-clock.txt

@@ -0,0 +1,28 @@
+Binding for the AXS10X Generic PLL clock
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-<name>-pll-clock"
+  "snps,axs10x-arc-pll-clock"
+  "snps,axs10x-pgu-pll-clock"
+- reg: should always contain 2 pairs address - length: first for PLL config
+registers and second for corresponding LOCK CGU register.
+- clocks: shall be the input parent clock phandle for the PLL.
+- #clock-cells: from common clock binding; Should always be set to 0.
+
+Example:
+	input-clk: input-clk {
+		clock-frequency = <33333333>;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	core-clk: core-clk@80 {
+		compatible = "snps,axs10x-arc-pll-clock";
+		reg = <0x80 0x10>, <0x100 0x10>;
+		#clock-cells = <0>;
+		clocks = <&input-clk>;
+	};

Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt

@@ -0,0 +1,71 @@
+STMicroelectronics STM32H7 Reset and Clock Controller
+=====================================================
+
+The RCC IP is both a reset and a clock controller.
+
+Please refer to clock-bindings.txt for common clock controller binding usage.
+Please also refer to reset.txt for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be:
+  "st,stm32h743-rcc"
+
+- reg: should be register base and length as documented in the
+  datasheet
+
+- #reset-cells: 1, see below
+
+- #clock-cells : from common clock binding; shall be set to 1
+
+- clocks: External oscillator clock phandle
+  - high speed external clock signal (HSE)
+  - low speed external clock signal (LSE)
+  - external I2S clock (I2S_CKIN)
+
+Optional properties:
+- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
+  write protection (RTC clock).
+
+Example:
+
+	rcc: reset-clock-controller@58024400 {
+		compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+		reg = <0x58024400 0x400>;
+		#reset-cells = <1>;
+		#clock-cells = <2>;
+		clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>;
+
+		st,syscfg = <&pwrcfg>;
+};
+
+The peripheral clock consumer should specify the desired clock by
+having the clock ID in its "clocks" phandle cell.
+
+Example:
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&rcc TIM5_CK>;
+		};
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the reset device node and an index specifying
+which channel to use.
+The index is the bit number within the RCC registers bank, starting from RCC
+base address.
+It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+Where bit_offset is the bit offset within the register.
+
+For example, for CRC reset:
+  crc = AHB4RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x88 / 4 * 32 + 19 = 1107
+
+Example:
+
+	timer2 {
+		resets	= <&rcc STM32H7_APB1L_RESET(TIM2)>;
+	};

Documentation/devicetree/bindings/clock/sunxi-ccu.txt

@@ -3,18 +3,24 @@ Allwinner Clock Control Unit Binding
 
 Required properties :
 - compatible: must contain one of the following compatibles:
+		- "allwinner,sun4i-a10-ccu"
+		- "allwinner,sun5i-a10s-ccu"
+		- "allwinner,sun5i-a13-ccu"
 		- "allwinner,sun6i-a31-ccu"
+		- "allwinner,sun7i-a20-ccu"
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
 		- "allwinner,sun8i-a83t-ccu"
 		- "allwinner,sun8i-a83t-r-ccu"
 		- "allwinner,sun8i-h3-ccu"
 		- "allwinner,sun8i-h3-r-ccu"
++		- "allwinner,sun8i-r40-ccu"
 		- "allwinner,sun8i-v3s-ccu"
 		- "allwinner,sun9i-a80-ccu"
 		- "allwinner,sun50i-a64-ccu"
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
+		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the oscillators feeding the CCU. Two are needed: