"No installed apps work with this USB accessory"

[mb0x88]

sending command: start accessory Accessory was initialized successfully! Found accessory 18d1:2d01 accessory connected! read_usb_packet failed: Entity not found Closing accessory device

Detected usb device with vendor id d8c and product id 14 does not support Android Open Accessory protocol

I'm using calyxOS with OSX, had the message popup "No installed apps work with this USB accessory" on my phone.

The first three trival steps are missing the photos/could you write it in text?

[AdamPS]

I see this too. Log file:

configuring:
local interface: enp3s0
virtual interface: tun1
network: 10.10.10.0
address: 10.10.10.1
netmask: 24
nameserver: 127.0.0.53
tun1 interface configured!
SimpleRT started!
Detected usb device with vendor id 1d6b and product id 2 does not support Android Open Accessory protocol.
Detected usb device with vendor id 461 and product id 10 does not support Android Open Accessory protocol.
Detected usb device with vendor id 461 and product id 4e84 does not support Android Open Accessory protocol.
Detected usb device with vendor id 1d6b and product id 3 does not support Android Open Accessory protocol.
Detected usb device with vendor id 5e3 and product id 608 does not support Android Open Accessory protocol.
Device supports AOA 2.0!
Waiting 10 seconds before sending information to device
Sending identification to the device
 sending manufacturer: Konstantin Menyaev
 sending model: SimpleRT
 sending description: Simple Reverse Tethering
 sending version: 1.1.2
 sending url: https://github.com/vvviperrr/SimpleRT
 sending serial number: 10.10.10.2,127.0.0.53
 sending command: start accessory
Accessory was initialized successfully!
Found accessory 18d1:2d00
accessory connected!