Ubuntu 22.04 Incomplete buffer received

[redheli]

Hi,

I have a hikrobot MV-CS050-10GC, connect to laptop via ethernet,
compile from source OK

mkdir build & cd build
cmake ..
sudo make install

gc_info OK
but gc_stream return Incomplete buffer received

I set mtu 9000 alreay, and can see the image when use hikrobot's MVS client.

$ gc_stream K638xxxx
Package size: 9000

Incomplete buffer received
Incomplete buffer received
Incomplete buffer received
Incomplete buffer received
Incomplete buffer received

Received buffers:   5
Incomplete buffers: 5
Buffers per second: 9.36

$ gc_info -l
Transport Layer /home/max/ground_map/camera/rc_genicam_api/baumer/Ubuntu-16.04/x86_64//libbgapi2_gige.cti_2.9.22968.22969
Vendor:         Baumer
Model:          bgapi2_gige
Vendor version: 2.9.22968.22969
TL type:        GEV
Name:           libbgapi2_gige.cti
Pathname:       /home/max/ground_map/camera/rc_genicam_api/baumer/Ubuntu-16.04/x86_64//libbgapi2_gige.cti
Display name:   Baumer GEV TL
GenTL version   1.5

    Interface     enp46s0
    Display name: enp46s0
    TL type:      GEV

        Device             devicemodul34_bd_20_0f_57_8a
        Vendor:            Hikrobot
        Model:             MV-CS050-10GC
        TL type:           GEV
        Display name:      MV-CS050-10GC
        User defined name: 
        Access status:     ReadWrite
        Serial number:     K638xxxx
        Version:           
        TS Frequency:      0

    Interface     wlp0s20f3
    Display name: wlp0s20f3
    TL type:      GEV

    Interface     br-bee81386d075
    Display name: br-bee81386d075
    TL type:      GEV

    Interface     br-1147761da213
    Display name: br-1147761da213
    TL type:      GEV

    Interface     docker0
    Display name: docker0
    TL type:      GEV

Transport Layer /home/max/ground_map/camera/rc_genicam_api/baumer/Ubuntu-16.04/x86_64//libbgapi2_usb.cti_2.9.22669.22969
Vendor:         Baumer
Model:          bgapi2_usb
Vendor version: 2.9.22669.22969
TL type:        U3V
Name:           libbgapi2_usb.cti
Pathname:       /home/max/ground_map/camera/rc_genicam_api/baumer/Ubuntu-16.04/x86_64//libbgapi2_usb.cti
Display name:   Baumer U3V TL
GenTL version   1.5

    Interface     USB
    Display name: USB HOST
    TL type:      U3V

[flixr]

Have you had a look at your sysctl settings and checked if packages are dropped on your machine as per https://github.com/roboception/rc_genicam_api#network-optimization-under-linux ?