Create a LearnBot
Note: This page is going to be updated
If you want build your LearnBot you should follow the next steps:
You should buy the items of the next list:
| Name of component | Units | Seller | Link |
|---|---|---|---|
| PLA | 1 | BQ | https://store.bq.com/es/bobina-pla-easy-go-bq |
| Name of component | Units | Seller | Link |
|---|---|---|---|
| EBO Shield | 1 | Eurocircuits | https://www.eurocircuits.com/ |
| Name of component | Units | Seller | Link |
|---|---|---|---|
| M2x5 for VL53L0X | 10 | TME | https://www.tme.eu/es/details/b20x5_bn13265/tirafondos/bossard/ka20x5bn13265/ |
| M2x25 P0.4 for raspberry | 4 | TME | https://www.tme.eu/es/details/b2x25_bn650/tornillos/bossard/1425374/ |
| Nut M2 P0.4 | 4 | TME | https://www.tme.eu/es/details/m2_d934-a2/tornillos/kraftberg/ |
| M1.8x4 for screen support | 6 | TME | https://www.tme.eu/es/details/b1.8x4_bn20093/tirafondos/bossard/3205355/ |
| M2x6 P0.4 for base cover | 4 | TME | https://www.tme.eu/es/details/m2x6_d7985-a2/tornillos/kraftberg/ |
| M2.5x5 for base support | 4 | TME | https://www.tme.eu/es/details/b25x5_bn13577/tirafondos/bossard/ka25x5bn13577/ |
You should print the items of the next list:
All files are on this repository in branch desings in folder desingsForEdit/Learnbot2.1/STL/.
| Name of piece | Units | Localization |
|---|---|---|
| FrontCase | 1 | FrontCase.stl |
| BackCase | 1 | BackCase.stl |
| base | 1 | base.stl |
| Soport Raspberry | 1 | Soport Raspberry.stl |
| camera case | 1 | cameracase.stl |
You should see the next video to see the steps.
Sorry for the inconvenience, this video isn't available yet.
The displ