Disassemble WAAAVEPOOL ISO

[rootnotez]

Disassemble the VSERPI ISOs.

Essentially this is information gathering, to support running our own compilations of VSERPI.

It appears that there are two families of ISOs, one has WAAAVE_POOL and some other instruments; the other, possibly are built on images that require audio drivers such as AUTO_WAAAVES. It would be good to document this.

It might be worthwile to get md5sum of the openFrameworks directories for identifying which files are identical across instruments.

Goals:

• Identify the base operating system
  • There were a couple distros, RPIOS, Debian, NOOBS(?) at the time.
• Identify any kernel modifications
• Identify an Loadable Kernel Modifications
• Gather apt list --installed from ISOs
• Identify drivers for the supported audio hats
• Document build date, to have a frame of reference for what library versions.

[rootnotez]

Announcement of RPI Buster 2019-06-20 -
https://forums.raspberrypi.com/viewtopic.php?t=243387

[PeteHaughie]

VSERPI Waaave Pool v1.5

Archive Name

WP1_5.rar

Format

NTSC

ls ~/openFrameworks/apps/myApps/

ARTIFICIAL_LIFE_4_5            HELLO_WORD_0
CHROMATIC_ABERRATION_4_5       SPECTRAL_MESH_4_5
CONVOLUTIONAL_CHAOS_0          super_haeckel_adventures_64
defaultVideoProcessingProject  TEMPORAL_VORTEX_4_5
emptyExample                   video_processing_template
GENERIC_GEOMETRY_UTILITY       WAAAVE_POOL_4_5

OS Info cat /etc/os-release

PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=raspbian
ID_LIKE=debian

~/.bashrc

cd /home/pi/openFrameworks/apps/myApps/WAAAVE_POOL_4_5
make run

#cd /home/pi/openFrameworks/apps/myApps/ARTIFICIAL_LIFE_4_5
#make run

#cd /home/pi/openFrameworks/apps/myApps/SPECTRAL_MESH_4_5
#make run

#cd /home/pi/openFrameworks/apps/myApps/TEMPORAL_VORTEX_4_5
#make run

#cd /home/pi/openFrameworks/apps/myApps/CHROMATIC_ABERRATION_4_5
#make run

#cd /home/pi/openFrameworks/apps/myApps/super_haeckel_adventures_64
#make run

#cd /home/pi/openFrameworks/apps/myApps/HELLO_WORD_0
#make run

#cd /home/pi/openFrameworks/apps/myApps/GENERIC_GEOMETRY_UTILITY
#make run

#cd /home/pi/openFrameworks/apps/myApps/CONVOLUTIONAL_CHAOS_0
#make run

The above is interesting if not only because there is no run task in the makefile as indicated by this entry on successful login:

HOST_OS=Linux
checking pkg-config libraries:   cairo zlib gstreamer-app-1.0 gstreamer-1.0 gstreamer-video-1.0 gstreamer-base-1.0 libudev freetype2 fontconfig sndfile openal libcurl glfw3 rtaudio gtk+-3.0
with PKG_CONFIG_LIBDIR=
* failed to open vchiq instance
/home/pi/openFrameworks/libs/openFrameworksCompiled/project/makefileCommon/compile.project.mk:190: recipe for target 'run' failed
make: *** [run] Error 255

I suspect it's supposed to be make RunRelease

OF Version (~/openFrameworks/CHANGELOG.md)

0.10.0

config.txt

# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=40
#overscan_right=14
#overscan_top=4
#overscan_bottom=2

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
hdmi_group=1
hdmi_mode=2

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
#dtparam=audio=on
gpu_mem=512
start_x=1

disable_splash=1

dtoverlay=hifiberry-dacplusadc

cmdline.txt

# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=40
#overscan_right=14
#overscan_top=4
#overscan_bottom=2

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
hdmi_group=1
hdmi_mode=2

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
#dtparam=audio=on
gpu_mem=512
start_x=1

disable_splash=1

dtoverlay=hifiberry-dacplusadc