Replies: 12 comments 1 reply
-
|
Can you run the functions listed:
|
Beta Was this translation helpful? Give feedback.
-
|
My best guess is that you are on Windows most likely and you either don't have RTools installed or it's not installed properly. But perhaps the error messages can give us a better clue |
Beta Was this translation helpful? Give feedback.
-
|
Yes I am on windows machine
sessionInfo()R version 4.3.3 (2024-02-29 ucrt)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 11 x64 (build 26100)
Matrix products: default
locale:
[1] LC_COLLATE=English_United States.utf8
[2] LC_CTYPE=English_United States.utf8
[3] LC_MONETARY=English_United States.utf8
[4] LC_NUMERIC=C
[5] LC_TIME=English_United States.utf8
time zone: America/Chicago
tzcode source: internal
attached base packages:
[1] stats graphics grDevices
[4] utils datasets methods
[7] base
other attached packages:
[1] readr_2.1.5 ggplot2_3.5.0
[3] stringr_1.5.1 dplyr_1.1.4
[5] DT_0.32 bslib_0.9.0
[7] shiny_1.8.0 reactable_0.4.4
[9] reticulate_1.42.0
loaded via a namespace (and not attached):
[1] rappdirs_0.3.3
[2] sass_0.4.9
[3] utf8_1.2.4
[4] generics_0.1.3
[5] stringi_1.8.3
[6] lattice_0.22-5
[7] hms_1.1.3
[8] digest_0.6.37
[9] magrittr_2.0.3
[10] grid_4.3.3
[11] fastmap_1.2.0
[12] jsonlite_2.0.0
[13] Matrix_1.6-5
[14] promises_1.2.1
[15] fansi_1.0.6
[16] crosstalk_1.2.1
[17] scales_1.3.0
[18] textshaping_0.3.7
[19] jquerylib_0.1.4
[20] cli_3.6.4
[21] crayon_1.5.2
[22] rlang_1.1.5
[23] ellipsis_0.3.2
[24] munsell_0.5.0
[25] yaml_2.3.10
[26] withr_3.0.2
[27] cachem_1.1.0
[28] tools_4.3.3
[29] tzdb_0.4.0
[30] memoise_2.0.1
[31] colorspace_2.1-0
[32] httpuv_1.6.14
[33] sourcetools_0.1.7-1
[34] vctrs_0.6.5
[35] R6_2.6.1
[36] mime_0.13
[37] png_0.1-8
[38] lifecycle_1.0.4
[39] fs_1.6.5
[40] htmlwidgets_1.6.4
[41] fontawesome_0.5.3
[42] ragg_1.2.7
[43] pkgconfig_2.0.3
[44] pillar_1.9.0
[45] later_1.3.2
[46] gtable_0.3.4
[47] rsconnect_1.3.4
[48] glue_1.8.0
[49] Rcpp_1.0.14
[50] systemfonts_1.0.5
[51] tibble_3.2.1
[52] tidyselect_1.2.1
[53] rstudioapi_0.17.1
[54] farver_2.1.1
[55] bsicons_0.1.2
[56] xtable_1.8-4
[57] htmltools_0.5.8.1
[58] labeling_0.4.3
[59] compiler_4.3.3
…On Sun, Jun 15, 2025 at 4:26 PM Ryan Zomorrodi ***@***.***> wrote:
*ryanzomorrodi* left a comment (ropensci/sasquatch#8)
<#8 (comment)>
My best guess is that you are on Windows most likely and you either don't
have RTools installed or it's not installed properly. But perhaps the error
messages can give us a better clue
—
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI6QPUZ66WKFYH3HJ5PWFQD3DXQHFAVCNFSM6AAAAAB7LVPPPOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSNZUGY4TSOJXG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I added install.packages('sasquatch', repos = c('https://ryanzomorrodi.r-universe.dev', 'https://cloud.r-project.org'))Typically, in order to install any R package from source on Windows you will have to install Rtools. Since you are using R 4.3.3 you would have to install Rtools43. But the r-universe version should work for you. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the tip! Yes I have installed Rtools 4.3
…On Mon, Jun 16, 2025 at 11:11 AM Ryan Zomorrodi ***@***.***> wrote:
*ryanzomorrodi* left a comment (ropensci/sasquatch#8)
<#8 (comment)>
I added sasquatch to r-universe last week so I think you should just be
able to install using:
install.packages('sasquatch', repos = c('https://ryanzomorrodi.r-universe.dev', 'https://cloud.r-project.org'))
Typically, in order to install any R package from source on Windows you
will have to install Rtools. Since you are using R 4.3.3 you would have to
install Rtools43
<https://cran.r-project.org/bin/windows/Rtools/rtools43/rtools.html>. But
the r-universe version should work for you.
—
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI6QPU2IG6S2ORKBRJBLJU33D3UBTAVCNFSM6AAAAAB7LVPPPOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSNZXGIZTCNBRGA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
install.packages('sasquatch', repos = c('https://ryanzomorrodi.r-universe.dev', 'https://cloud.r-project.org')) Installing package into ‘C:/Users/tatap/AppData/Local/R/win-library/4.3’ (as ‘lib’ is unspecified) installing the source package ‘sasquatch’ trying URL 'https://ryanzomorrodi.r-universe.dev/src/contrib/sha256-1d6a91184322cc62c700e1540549b51a4add8588943e7478c2ca3d28f2d42d11' Content type 'application/gzip' length 2560564 bytes (2.4 MB) downloaded 2.4 MB * installing source package 'sasquatch' ... ** using staged installation ** R ** inst ** byte-compile and prepare package for lazy loading ** help *** installing help indices *** copying figures ** building package indices ** installing vignettes ** testing if installed package can be loaded from temporary location ** testing if installed package can be loaded from final location ** testing if installed package keeps a record of temporary installation path * DONE (sasquatch) The downloaded source packages are in ‘C:\Users\tatap\AppData\Local\Temp\Rtmp8g4Exm\downloaded_packages’ > install.packages("C:/Users/tatap/AppData/Local/Temp/Rtmp8g4Exm/downloaded_packages/sha256-1d6a91184322cc62c700e1540549b51a4add8588943e7478c2ca3d28f2d42d11", repos = NULL) Installing package into ‘C:/Users/tatap/AppData/Local/R/win-library/4.3’ (as ‘lib’ is unspecified) Error in install.packages : type == "both" cannot be used with 'repos = NULL' > Error in install.packages : type == "both" cannot be used with 'repos = NULL' > install.packages("C:/Users/tatap/AppData/Local/Temp/Rtmp8g4Exm/downloaded_packages/sha256-1d6a91184322cc62c700e1540549b51a4add8588943e7478c2ca3d28f2d42d11" ) Installing package into ‘C:/Users/tatap/AppData/Local/R/win-library/4.3’ (as ‘lib’ is unspecified) Warning in install.packages : package ‘C:/Users/tatap/AppData/Local/Temp/Rtmp8g4Exm/downloaded_packages/sha256-1d6a91184322cc62c700e1540549b51a4add8588943e7478c2ca3d28f2d42d11’ is not available for this version of R A version of this package for your version of R might be available elsewhere, see the ideas at https://cran.r-project.org/doc/manuals/r-patched/R-admin.html#Installing-packages > install.packages("C:/Users/tatap/AppData/Local/Temp/Rtmp8g4Exm/downloaded_packages/sha256-1d6a91184322cc62c700e1540549b51a4add8588943e7478c2ca3d28f2d42d11" ) Installing package into ‘C:/Users/tatap/AppData/Local/R/win-library/4.3’ (as ‘lib’ is unspecified) Warning in install.packages : package ‘C:/Users/tatap/AppData/Local/Temp/Rtmp8g4Exm/downloaded_packages/sha256-1d6a91184322cc62c700e1540549b51a4add8588943e7478c2ca3d28f2d42d11’ is not available for this version of R A version of this package for your version of R might be available elsewhere, see the ideas at https://cran.r-project.org/doc/manuals/r-patched/R-admin.html#Installing-packages
|
Beta Was this translation helpful? Give feedback.
-
|
it is still having an issue , am I missing something here sorry for back and forth |
Beta Was this translation helpful? Give feedback.
-
|
I'm not sure. Since you installed Rtools, hopefully you should be able to run the original: pak::pkg_install("ryanzomorrodi/sasquatch")If that doesn't work then:
And send me the output of these messages |
Beta Was this translation helpful? Give feedback.
-
|
Fixed!
[image: image.png]
…On Mon, Jun 16, 2025 at 12:40 PM Ryan Zomorrodi ***@***.***> wrote:
*ryanzomorrodi* left a comment (ropensci/sasquatch#8)
<#8 (comment)>
I'm not sure. Since you installed Rtools, hopefully you should be able to
run the original:
pak::pkg_install("ryanzomorrodi/sasquatch")
If that doesn't work then:
Call pkgbuild::check_build_tools(debug = TRUE) to diagnose the problem.
Type .Last.error to see the more details.
And send me the output of these messages
—
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI6QPU3FNACFFIJL2UWOJSL3D36P3AVCNFSM6AAAAAB7LVPPPOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSNZXGQ3TQMJVGE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Awesome, thanks for the update!
…On Mon, Jun 16, 2025 at 12:52 PM Ryan Zomorrodi ***@***.***> wrote:
Closed #8 <#8> as
completed.
—
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AI6QPU76TEOFK6D5MMVBFED3D377HAVCNFSM6AAAAAB7LVPPPOVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJYGE3TKNBSGYYDANA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi @tataphani . Definitely try to be careful with whatever you send to me. Even if you send a reply via email, all your replies are posted on the public github issue. It seems you included your SAS ODA password. I would definitely recommend resetting your password, and hopefully you do not reuse passwords, but if you do, I would recommend resetting any accounts with the same password as well. I have deleted your last reply, but because of the nature of the internet I cannot guarantee that no one else saw it in the meantime or that it has not been saved somewhere else. |
Beta Was this translation helpful? Give feedback.
-
|
As to your issue, there are a couple things at play here. So
Let's do some troubleshooting of the first problem, first It seems that Run reticulate::py_discover_config("saspy", "r-saspy")If you get Error:
! Virtual environment 'r-saspy' does not exist.Then, You should get an output like this: python: /home/user/.virtualenvs/r-saspy/bin/python
libpython: /usr/lib/python3.12/config-3.12-x86_64-linux-gnu/libpython3.12.so
pythonhome: /home/user/.virtualenvs/r-saspy:/home/user/.virtualenvs/r-saspy
version: 3.12.3 (main, Feb 4 2025, 14:48:35) [GCC 13.3.0]
numpy: /home/user/.virtualenvs/r-saspy/lib/python3.12/site-packages/numpy
numpy_version: 2.2.4
saspy: /home/user/.virtualenvs/r-saspy/lib/python3.12/site-packages/saspyIf you see saspy: [NOT FOUND]Then the virtual environment was created, but saspy is not in it. Ideally, you should see something like this: saspy: C:/Users/tatap/OneDrive/Documents/.virtualenvs/r-saspy/lib/site-packages/saspyIf you see the full path of saspy then great, if not, let me know what you see |
Beta Was this translation helpful? Give feedback.
-
|
@tataphani were you able to get SAS ODA setup? |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
I have already installed Python and had my access to SAS online edtion while trying to install this error see the log and it does not suggest any other dependencies needed can you please help
→ Will install 25 packages.
→ Will download 24 CRAN packages (18.43 MB).
→ Will download 1 package with unknown size.
ℹ Getting 24 pkgs (18.43 MB) and 1 pkg with unknown size
✔ Got R6 2.6.1 (i386+x86_64-w64-mingw32) (87.88 kB)
✔ Got base64enc 0.1-3 (x86_64-w64-mingw32) (32.65 kB)
✔ Got cachem 1.1.0 (x86_64-w64-mingw32) (72.77 kB)
✔ Got digest 0.6.37 (x86_64-w64-mingw32) (222.07 kB)
✔ Got evaluate 1.0.3 (i386+x86_64-w64-mingw32) (102.43 kB)
✔ Got fastmap 1.2.0 (x86_64-w64-mingw32) (133.49 kB)
✔ Got highr 0.11 (i386+x86_64-w64-mingw32) (44.15 kB)
✔ Got tinytex 0.56 (i386+x86_64-w64-mingw32) (145.04 kB)
✔ Got rprojroot 2.0.4 (i386+x86_64-w64-mingw32) (114.01 kB)
✔ Got rstudioapi 0.17.1 (i386+x86_64-w64-mingw32) (336.93 kB)
✔ Got Rcpp 1.0.14 (x86_64-w64-mingw32) (2.89 MB)
✔ Got bslib 0.9.0 (i386+x86_64-w64-mingw32) (5.92 MB)
✔ Got jquerylib 0.1.4 (i386+x86_64-w64-mingw32) (526.07 kB)
✔ Got mime 0.13 (x86_64-w64-mingw32) (52.43 kB)
✔ Got rappdirs 0.3.3 (x86_64-w64-mingw32) (51.75 kB)
✔ Got fontawesome 0.5.3 (i386+x86_64-w64-mingw32) (1.40 MB)
✔ Got knitr 1.50 (i386+x86_64-w64-mingw32) (1.15 MB)
✔ Got lifecycle 1.0.4 (i386+x86_64-w64-mingw32) (140.13 kB)
✔ Got memoise 2.0.1 (i386+x86_64-w64-mingw32) (50.70 kB)
✔ Got htmlwidgets 1.6.4 (i386+x86_64-w64-mingw32) (812.97 kB)
✔ Got rmarkdown 2.29 (i386+x86_64-w64-mingw32) (2.69 MB)
✔ Got yaml 2.3.10 (x86_64-w64-mingw32) (118.65 kB)
✔ Got withr 3.0.2 (i386+x86_64-w64-mingw32) (228.35 kB)
✔ Got jsonlite 2.0.0 (x86_64-w64-mingw32) (1.11 MB)
✔ Got sasquatch 0.0.0.9042 (source) (1.67 MB)
✔ Downloaded 25 packages (20.10 MB) in 2.7s
✔ Installed R6 2.6.1 (653ms)
✔ Installed base64enc 0.1-3 (818ms)
✔ Installed cachem 1.1.0 (1.2s)
✔ Installed evaluate 1.0.3 (1.6s)
✔ Installed fastmap 1.2.0 (1.9s)
✔ Installed digest 0.6.37 (2.2s)
✔ Installed fontawesome 0.5.3 (1.9s)
✔ Installed highr 0.11 (2s)
✔ Installed htmlwidgets 1.6.4 (1.8s)
✔ Installed jquerylib 0.1.4 (1.8s)
✔ Installed jsonlite 2.0.0 (2.1s)
✔ Installed lifecycle 1.0.4 (1.9s)
✔ Installed memoise 2.0.1 (2s)
✔ Installed knitr 1.50 (2.9s)
✔ Installed Rcpp 1.0.14 (5.6s)
✔ Installed mime 0.13 (2.5s)
✔ Installed rappdirs 0.3.3 (2.4s)
✔ Installed bslib 0.9.0 (6.5s)
✔ Installed rprojroot 2.0.4 (2s)
✔ Installed rstudioapi 0.17.1 (2.1s)
✔ Installed tinytex 0.56 (2s)
✔ Installed rmarkdown 2.29 (3.2s)
✔ Installed withr 3.0.2 (1.9s)
✔ Installed yaml 2.3.10 (1.7s)
ℹ Packaging sasquatch 0.0.0.9042
✔ Packaged sasquatch 0.0.0.9042 (1.7s)
ℹ Building sasquatch 0.0.0.9042
Error:
! error in pak subprocess
Caused by error:
! Could not find tools necessary to compile a package
Call
pkgbuild::check_build_tools(debug = TRUE)to diagnose the problem.Type .Last.error to see the more details.
Beta Was this translation helpful? Give feedback.
All reactions