Shorten nStandardMsgType to fit 15-character limit

Author: marshallpowell97

staubli_val3_driver/val3/ros_server/decodeMsgBody.pgx

@@ -27,10 +27,10 @@
   l_bFlag=false
 
   switch rosGenericMsg.header.nMsgType
-    case nStandardMsgType["JOINT_TRAJ_PT"]
+    case nStdMsgType["JOINT_TRAJ_PT"]
       call decTrajPt(l_bFlag)
     break
-    case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+    case nStdMsgType["JOINT_TRAJ_PT_FULL"]
       call decTrajPtFull(l_bFlag)
     break
     default
@@ -44,10 +44,10 @@
     // error whilst decoding msg body...
     if (rosGenericMsg.header.nCommType==2)
       switch rosGenericMsg.header.nMsgType
-        case nStandardMsgType["JOINT_TRAJ_PT"]
+        case nStdMsgType["JOINT_TRAJ_PT"]
           rosTrajPtAck.header.nReplyCode=2
         break
-        case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+        case nStdMsgType["JOINT_TRAJ_PT_FULL"]
           rosTrajPtFAck.header.nReplyCode=2
         break
         default

staubli_val3_driver/val3/ros_server/encodeAck.pgx

@@ -19,10 +19,10 @@
 
 
   switch rosGenericMsg.header.nMsgType
-    case nStandardMsgType["JOINT_TRAJ_PT"]
+    case nStdMsgType["JOINT_TRAJ_PT"]
       call encTrajPtAck()
     break
-    case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+    case nStdMsgType["JOINT_TRAJ_PT_FULL"]
       call encTrajPtFAck()
     break
     default

staubli_val3_driver/val3/ros_server/pushMotion.pgx

@@ -28,7 +28,7 @@
 
 
   switch rosGenericMsg.header.nMsgType
-    case nStandardMsgType["JOINT_TRAJ_PT"]
+    case nStdMsgType["JOINT_TRAJ_PT"]
       l_mTrajPt.nSequence=rosTrajPtMsg.jointTrajPt.nSeq
 
       // ROS joint position values are in rad, but VAL3 uses degrees
@@ -43,7 +43,7 @@
       l_mTrajPt.nDuration=rosTrajPtMsg.jointTrajPt.nDuration
 
     break
-    case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+    case nStdMsgType["JOINT_TRAJ_PT_FULL"]
       l_mTrajPt.nSequence=rosTrajPtFMsg.jointTrajPtFull.nSeq
       l_mTrajPt.nDuration=rosTrajPtFMsg.jointTrajPtFull.nTime
 
@@ -91,10 +91,10 @@
       // thus ACK should flag FAILURE, but only if comm type is request
       if(rosGenericMsg.header.nCommType==nCommType["SERVICE_REQUEST"])
         switch rosGenericMsg.header.nMsgType
-          case nStandardMsgType["JOINT_TRAJ_PT"]
+          case nStdMsgType["JOINT_TRAJ_PT"]
             rosTrajPtAck.header.nReplyCode=2
           break
-          case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+          case nStdMsgType["JOINT_TRAJ_PT_FULL"]
             rosTrajPtFAck.header.nReplyCode=2
           break
           default

staubli_val3_driver/val3/ros_server/recvMsgBody.pgx

@@ -27,10 +27,10 @@
   l_bFlag=false
 
   switch rosGenericMsg.header.nMsgType
-    case nStandardMsgType["JOINT_TRAJ_PT"]
+    case nStdMsgType["JOINT_TRAJ_PT"]
       call recvTrajPt(l_bFlag)
     break
-    case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+    case nStdMsgType["JOINT_TRAJ_PT_FULL"]
       call recvTrajPtFull(l_bFlag)
     break
     default

staubli_val3_driver/val3/ros_server/ros_server.dtx

@@ -456,7 +456,7 @@
       </Value>
     </Data>
     <Data name="nVel" access="private" xsi:type="array" type="num" size="2" />
-    <Data name="nStandardMsgType" access="private" xsi:type="collection" type="num">
+    <Data name="nStdMsgType" access="private" xsi:type="collection" type="num">
       <Value key="JOINT_TRAJ_PT" value="11" />
       <Value key="JOINT_TRAJ_PT_FULL" value="14" />
     </Data>

staubli_val3_driver/val3/ros_server/sendAck.pgx

@@ -22,10 +22,10 @@
 
 
   switch rosGenericMsg.header.nMsgType
-    case nStandardMsgType["JOINT_TRAJ_PT"]
+    case nStdMsgType["JOINT_TRAJ_PT"]
       call sendRosMsg(siTcpIpMotion, rosTrajPtAck.prefix, rosTrajPtAck.header, rosTrajPtAck.body, nInConnFlag)
     break
-    case nStandardMsgType["JOINT_TRAJ_PT_FULL"]
+    case nStdMsgType["JOINT_TRAJ_PT_FULL"]
       call sendRosMsg(siTcpIpMotion, rosTrajPtFAck.prefix, rosTrajPtFAck.header, rosTrajPtFAck.body, nInConnFlag)
     break
     default