Max Amp Value at Status Dashboard (end of flight) seems to be wrong using Kontronik ESC

[garfield2412]

i posted this a while ago on Discord ESC-telemetry:
Just wondering: I got used capacity, voltage and everything right. But the Amps don't seem to be right. I got a max value of 16A shown on the end of the flight. Expecting 160A :-). Used Capacity is shown right 3500, Voltage is right, Max Watt's are also wrong, because Amps are wrong. Any idea? Kosmik 200 Firmware is up to date 4.17 .

did some investigation, because no of my other ESC's (other brands) has this issue / unusual values.
consumption and fuel and voltage all seem to be correct.
But the max Amp value at the end of the Flight screen seems to be wrong.

Investigation:
BBL File from a Flight today--> showing max amps between 200 and 230
Kosmiks SD Card Log from the same flight --> showing max amps also in this Range
RF log file from log folder on the transmitter --> showning amp values between 0 and 9 Amps (max 9.41)

Kosmik:

Blackbox:

RF Log from Transmitter (filtered the highest Amps)

So why does RF-Widget show such a strange low max value? And only when using a Kosmik?
There is a posibility, that these shown values are the BEC Amps in my opinion

[garfield2412]

so i did a little more investigation to se where the differeces may come from.
General Info: Kontronik Kosmik 200 (not the one with Integrated telemetry). Firmware 4.17 (latest)

activated telemetry log from FrSky Radio too and it's showing nice Current Values in the Range i am Expecting >30-200A with peaks >150A

So it seems to be the transmission from ESC to RF and to X20Pro is right in general and there is no scaling problem on the FBL. The Issue may adressed to Ethos Suite or slow sample rate of Ethos Suite or picking the wrong Curret values (maybee BEC or averge Amp insted of Main Motor Max Amp).

RF Suite writes an extra log and the highest values from the same flight are logged like this:

i deactivated BEC Current logging soe time before - the issue was like this - Max Amp was shown 16A and not somewhere in the Range >30A.
My other Helis with other ESC's show reasonable values, most of them > 100A and not 8-19A like the one with the kosmik.

[garfield2412]

how does RF suite pick up it's sensor data?
So i may shut off all other current sensor data transmitions to theck if something changes.
Is it the sensor-ID?

actually there are three values listed on the transmitter telemetry menu:
18 0201 Name "Strom" (engl. Current)
18 0222 Neme "Strom" (engl. Current)
18 0200 Name "Strom" (engl. Current)