Regarding X-Touch Editor software

[yomozingo]

I use LR with a Macbook. I was told to download X-Touch Editor software in order to determine if my X-Touch Compact is set up to
send NRPN codes. Since the editor is a Windows program are there any other way to approach this?

Thank you!

[yomozingo]

My friend came over with PC laptop and we downloaded and opened editor. I didn't see any indication of NRPN codes in the program. Any further help would be greatly appreciated.

[yomozingo]

I'm back at trying to figure out this problem. I dowloaded a profile from a group online. But the same problem has persisted. For instance, every time I move the 1st fader MIDILR automatically brings up CC:101 in addition to CC:1. I am attaching a video of the action. If I clear all rows and move the 1st fader it brings up both CC:1 and CC:101 (as shown in attached screen shot.) If anyone can help me fix this I would greatly appreciate it. I used to use X-Touch Compact with PFixer. My first X-Touch broke then I discovered MIDILR and bought another X-Touch Compact to use with it. I really miss the convenience of the sliders. Thank you

X-Touch.mov

.

[yomozingo]

Update. I tried layer B and that works for assigning the sliders. Layer B gives CC:128 along with CC:1 but it works. Layer A continues to give CC:101 along with CC:1.

I would be happy to just use Layer B but the sliders do not go to custom setting when going from photo to photo. Is there something specific that I need to do in order to get the sliders to automatically move to each photos particular settings?

Thank you!

[antzpantz]

Sorry, I didn't realise that it was a Windows-only program. You'll probably have to find a PC to initially check the configuration of the controller.

…

On Tue, 26 Jul 2022 at 23:29, yomozingo ***@***.***> wrote: I use LR with a Macbook. I was told to download X-Touch Editor software in order to determine if my controller is set up to send NRPN codes. It looks like it is a Windows program. Any other way to approach this? Thank you! — Reply to this email directly, view it on GitHub <#672>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFIYPFAEBX3ZM5F6WIDJPFTVV774BANCNFSM54WL3T3Q> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>