Problem with the Behringer BCF Motorized Faders

[bernhardrogen]

Hello, I've been using MIDI2LR for many years, but now with a new MacBook M3 Max, I'm having trouble with my Behringer BCF 2000.

Everything works perfectly, but the motorized faders don't move. I can change settings with the faders, but when I change a photo in LR or change settings in LR, nothing happens with the faders.

I've been searching and reading for two days now and can't find anything. I've also used a MIDI monitor. Signals are coming in from the MIDI controller, and signals from LR/plug-in are also being sent as MIDI signals. However, the faders don't move.

I think the problem is that the Behringer input channel is wrong, or the motors are disabled, but I can't find a solution anywhere online. Can anyone help me?

Best regards, Bernhard

[antzpantz]

You might need to look at the Behringer configuration software to see if your controller's set up to read and operate on fader commands.

…

On Wed, 20 Aug 2025 at 00:03, bernhardrogen ***@***.***> wrote: Hello, I've been using MIDI2LR for many years, but now with a new MacBook M3 Max, I'm having trouble with my Behringer BCF 2000. Everything works perfectly, but the motorized faders don't move. I can change settings with the faders, but when I change a photo in LR or change settings in LR, nothing happens with the faders. I've been searching and reading for two days now and can't find anything. I've also used a MIDI monitor. Signals are coming in from the MIDI controller, and signals from LR/plug-in are also being sent as MIDI signals. However, the faders don't move. I think the problem is that the Behringer input channel is wrong, or the motors are disabled, but I can't find a solution anywhere online. Can anyone help me? Best regards, Bernhard — Reply to this email directly, view it on GitHub <#839>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFIYPFG4UDAG4HWHLDY6AMT3ONDEVAVCNFSM6AAAAACEIYE7Z2VHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZYG43DEMZQHE> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[bernhardrogen]

Hello, yes, I think so too, but I don't know what settings I need to make so that the Behringer controller can receive feedback from MIDI2LR. Can you help me with the settings?

[antzpantz]

I've never used the BCF2000 so I can't help you.

Others in the discussion forum have used it before. Search "fader" in the Discussions, or try these two that I found:

#565

#611

Or read the manual for the BCF2000 Configuration.