Disable created wifi AP

[Luke-Shepp]

Hi,

I'm getting this project set up and it's working well for my uses on a Pi Zero 2W.

I'm using CBcm4343Device::CreateOpenNet to have the ability to connect to it from other devices, along with something similar to 21-webserver to allow configuration changes from a web interface - all works good.

I'm looking for a way to disable this network (after a button press on a gui using lvgl, but that's fine, just for context), and re-enable it at a later time with CreateOpenNet again.

I'm very new to C, so I might be missing something obvious!

I've tried;

This is from the destructor just pulled out into something usable

void CBcm4343Device::Shutdown (void)
{
	assert (s_EtherDevice.shutdown != 0);
	(*s_EtherDevice.shutdown) (&s_EtherDevice);

	delete s_EtherDevice.oq;
}

I get:

I've also tried using the disassoc like:

m_WLAN.Control("disassoc 1");

But get:

I've tried to do my due dilligence and searching both for circle and p9 but I'm afraid I can't see anything useful related to this, so hopefully a post here will resolve!

Thanks in advance

[rsta2]

Unfortunately this is not implemented yet. I will try to provide a solution soon.

[rsta2]

There is a new method CBcm4343Device::DestroyOpenNet() implemented on the develop branch now. You can call it to shutdown a created open network. Later you can re-create the network by calling CBcm4343Device::CreateOpenNet() as before. The CBcm4343Device object must not be deleted in the meantime. Tested on a RPi Zero 2 W.

[Luke-Shepp]

Absolutely perfect - thank you!