This guide showcases exotic and advanced use cases for ruvector-mincut, demonstrating cutting-edge features from the December 2025 breakthrough paper and production-grade deployment scenarios.
- Real-Time Network Monitoring
- 256-Core Agentic Chip Deployment
- December 2025 Paper Algorithms
- PolylogConnectivity for Worst-Case Guarantees
- ApproxMinCut for Large Graphs
- Custom Graph Sources
Use Case: Live infrastructure dashboard that alerts when network connectivity drops below critical thresholds.
The monitoring feature provides event-driven architecture for real-time alerts on minimum cut changes.
use ruvector_mincut::{MinCutBuilder, MonitorBuilder, EventType, MinCutEvent};
use std::sync::{Arc, Mutex};
fn main() -> Result<(), Box<dyn std::error::Error>> {
// Shared alert log
let alerts = Arc::new(Mutex::new(Vec::new()));
let alerts_clone = Arc::clone(&alerts);
// Configure monitor with thresholds
let monitor = MonitorBuilder::new()
// Critical: minimum cut below 5 edges
.threshold_below(5.0, "critical")
// Warning: minimum cut below 20 edges
.threshold_below(20.0, "warning")
// Safe: minimum cut above 100 edges
.threshold_above(100.0, "safe")
// Alert on any decrease
.on_event_type(EventType::CutDecreased, "alert", move |event: MinCutEvent| {
let mut log = alerts_clone.lock().unwrap();
log.push(format!(
"[{}] Cut decreased: {} → {} (threshold: {})",
event.timestamp.elapsed().unwrap().as_secs(),
event.old_value,
event.new_value,
event.threshold.unwrap_or("none".to_string())
));
// Trigger emergency protocols if critical
if event.new_value < 5.0 {
eprintln!("🚨 CRITICAL: Network connectivity at risk!");
}
})
.build();
// Create mincut structure with monitoring
let mut mincut = MinCutBuilder::new()
.exact()
.with_monitor(monitor)
.with_edges(vec![
// Initial network with good connectivity
(0, 1, 10.0), (1, 2, 10.0), (2, 3, 10.0),
(0, 2, 10.0), (1, 3, 10.0), // Redundant paths
])
.build()?;
println!("Initial min cut: {}", mincut.min_cut_value());
// Simulate network degradation
println!("\n📉 Simulating network degradation...");
// Remove redundant edges
mincut.delete_edge(0, 2)?; // Still safe
mincut.delete_edge(1, 3)?; // Now a path graph
// Critical edge removal
mincut.delete_edge(1, 2)?; // Triggers critical alert!
// Print alert log
let log = alerts.lock().unwrap();
println!("\n📋 Alert Log:");
for entry in log.iter() {
println!(" {}", entry);
}
Ok(())
}Configure multiple alert levels for different operational states:
use ruvector_mincut::{MonitorBuilder, EventType, Threshold};
let monitor = MonitorBuilder::new()
// Multiple threshold levels
.add_threshold(Threshold::new(5.0, "critical", "below"))
.add_threshold(Threshold::new(20.0, "warning", "below"))
.add_threshold(Threshold::new(50.0, "degraded", "below"))
.add_threshold(Threshold::new(100.0, "normal", "above"))
.add_threshold(Threshold::new(200.0, "excellent", "above"))
// Handlers for each threshold
.on_threshold("critical", |event| {
send_pagerduty_alert(&event);
trigger_failover_protocol();
})
.on_threshold("warning", |event| {
send_slack_notification(&event);
})
.on_threshold("excellent", |event| {
log_performance_metric(&event);
})
.build();Full event stream processing for complex monitoring logic:
use ruvector_mincut::{MonitorBuilder, EventType, MinCutEvent};
use std::collections::VecDeque;
// Sliding window for trend analysis
struct TrendAnalyzer {
window: VecDeque<f64>,
window_size: usize,
}
impl TrendAnalyzer {
fn new(window_size: usize) -> Self {
Self {
window: VecDeque::with_capacity(window_size),
window_size,
}
}
fn add_sample(&mut self, value: f64) {
self.window.push_back(value);
if self.window.len() > self.window_size {
self.window.pop_front();
}
}
fn is_declining(&self) -> bool {
if self.window.len() < 3 { return false; }
let recent: Vec<_> = self.window.iter().rev().take(3).collect();
recent[0] < recent[1] && recent[1] < recent[2]
}
}
fn setup_trend_monitoring() -> MonitorBuilder {
let mut analyzer = TrendAnalyzer::new(10);
MonitorBuilder::new()
.on_event_type(EventType::CutChanged, "trend", move |event| {
analyzer.add_sample(event.new_value);
if analyzer.is_declining() {
println!("⚠️ Declining trend detected!");
}
})
}Complete example integrating monitoring with a live dashboard:
use ruvector_mincut::{MinCutBuilder, MonitorBuilder, EventType};
use std::sync::{Arc, RwLock};
use std::collections::HashMap;
#[derive(Clone)]
struct DashboardMetrics {
current_cut: f64,
historical_min: f64,
historical_max: f64,
alert_count: usize,
uptime_percentage: f64,
}
fn create_infrastructure_monitor() -> Result<(), Box<dyn std::error::Error>> {
// Shared metrics
let metrics = Arc::new(RwLock::new(DashboardMetrics {
current_cut: 0.0,
historical_min: f64::MAX,
historical_max: 0.0,
alert_count: 0,
uptime_percentage: 100.0,
}));
let metrics_clone = Arc::clone(&metrics);
// Monitor with dashboard updates
let monitor = MonitorBuilder::new()
.threshold_below(10.0, "critical")
.on_event_type(EventType::CutChanged, "dashboard", move |event| {
let mut m = metrics_clone.write().unwrap();
m.current_cut = event.new_value;
m.historical_min = m.historical_min.min(event.new_value);
m.historical_max = m.historical_max.max(event.new_value);
if event.new_value < 10.0 {
m.alert_count += 1;
m.uptime_percentage *= 0.99; // Degrade uptime metric
}
// Update dashboard (would be websocket in production)
println!("📊 Dashboard Update: Cut={:.1}, Min={:.1}, Max={:.1}, Alerts={}, Uptime={:.2}%",
m.current_cut, m.historical_min, m.historical_max,
m.alert_count, m.uptime_percentage);
})
.build();
// Build network from infrastructure topology
let mut network = MinCutBuilder::new()
.exact()
.with_monitor(monitor)
.with_edges(load_infrastructure_topology()?)
.build()?;
// Simulate live updates
simulate_infrastructure_events(&mut network)?;
Ok(())
}
fn load_infrastructure_topology() -> Result<Vec<(u64, u64, f64)>, Box<dyn std::error::Error>> {
// Load from configuration file, database, or service discovery
Ok(vec![
// Data center 1 <-> Data center 2
(0, 10, 100.0), (1, 11, 100.0), (2, 12, 100.0),
// Data center 2 <-> Data center 3
(10, 20, 100.0), (11, 21, 100.0), (12, 22, 100.0),
// Internal connectivity within each DC
(0, 1, 1000.0), (1, 2, 1000.0), (2, 0, 1000.0),
(10, 11, 1000.0), (11, 12, 1000.0), (12, 10, 1000.0),
(20, 21, 1000.0), (21, 22, 1000.0), (22, 20, 1000.0),
])
}
fn simulate_infrastructure_events(
network: &mut impl DynamicMinCut
) -> Result<(), Box<dyn std::error::Error>> {
// Simulate edge failures
std::thread::sleep(std::time::Duration::from_millis(100));
network.delete_edge(0, 10)?; // Link failure
std::thread::sleep(std::time::Duration::from_millis(100));
network.delete_edge(1, 11)?; // Another link failure
// Recovery
std::thread::sleep(std::time::Duration::from_millis(100));
network.insert_edge(0, 10, 100.0)?; // Link restored
Ok(())
}flowchart TB
subgraph "Event Sources"
E1[Edge Insert]
E2[Edge Delete]
E3[Batch Update]
end
subgraph "MinCut Engine"
MC[MinCutWrapper]
I[BoundedInstance]
Q[Query Engine]
end
subgraph "Event Detection"
D1{Cut Value<br/>Changed?}
D2{Threshold<br/>Crossed?}
D3{Edge Added<br/>to Cut?}
end
subgraph "Event Handlers"
H1[Threshold Handler]
H2[Event Type Handler]
H3[Custom Callback]
end
subgraph "Actions"
A1[Alert Dashboard]
A2[Send Notification]
A3[Log Metrics]
A4[Trigger Failover]
end
E1 --> MC
E2 --> MC
E3 --> MC
MC --> I
I --> Q
Q --> D1
D1 -->|Yes| D2
D1 -->|Yes| D3
D2 -->|Crossed| H1
D3 -->|Yes| H2
D1 -->|Yes| H3
H1 --> A1
H1 --> A2
H2 --> A3
H1 --> A4
style MC fill:#e1f5ff
style Q fill:#fff4e1
style H1 fill:#ffe1e1
style A4 fill:#ff9999
Use Case: Deploy minimum cut computation on specialized agentic hardware with 256 WASM cores, each with 8KB memory constraint.
Each core uses a compact state structure verified at compile-time to fit in 8KB:
use ruvector_mincut::agentic::{CompactCoreState, BitSet256, CoreConfig};
// Each core maintains its own compact state
#[cfg(feature = "agentic")]
fn setup_core(core_id: u8) -> CompactCoreState {
CompactCoreState::new(CoreConfig {
core_id,
total_cores: 256,
max_vertices: 1024, // Adjusted for memory constraints
max_edges: 2048,
simd_enabled: true,
})
}
// Verify size at compile time
const _: () = {
assert!(std::mem::size_of::<CompactCoreState>() <= 6700);
};
#[cfg(feature = "agentic")]
fn process_on_core(mut state: CompactCoreState, edges: &[(u64, u64)]) {
// Process local subgraph
for &(u, v) in edges {
state.add_local_edge(u, v);
}
// Compute local minimum cut
let local_cut = state.compute_local_cut();
println!("Core {}: Local cut = {}", state.core_id(), local_cut);
}Ultra-compact 32-byte membership tracking for 256 vertices:
use ruvector_mincut::agentic::BitSet256;
#[cfg(feature = "agentic")]
fn demonstrate_bitset() {
let mut partition = BitSet256::new();
// Add vertices to partition
partition.insert(0);
partition.insert(5);
partition.insert(42);
partition.insert(255);
// Fast membership test
assert!(partition.contains(42));
assert!(!partition.contains(100));
// SIMD-accelerated operations
let mut other = BitSet256::new();
other.insert(42);
other.insert(100);
// Intersection, union, XOR all use SIMD128
let intersection = partition.intersection(&other);
assert_eq!(intersection.count(), 1); // Only vertex 42
// Memory footprint
assert_eq!(std::mem::size_of::<BitSet256>(), 32);
println!("BitSet256: {} bytes for 256 vertices",
std::mem::size_of::<BitSet256>());
}Distribute graph across 256 cores and execute in parallel:
use ruvector_mincut::agentic::{
CoreDistributor, CoreExecutor, ResultAggregator, DistributionStrategy
};
use std::sync::Arc;
#[cfg(feature = "agentic")]
fn parallel_mincut_256cores(
edges: Vec<(u64, u64, f64)>
) -> Result<f64, Box<dyn std::error::Error>> {
const NUM_CORES: usize = 256;
// Step 1: Distribute graph across cores
let distributor = CoreDistributor::new(
NUM_CORES,
DistributionStrategy::MetisPartitioning // Minimize edge cuts
);
let distribution = distributor.distribute(&edges)?;
println!("Graph distributed:");
println!(" - {} cores active", distribution.active_cores());
println!(" - {} cross-core edges", distribution.cut_edges());
println!(" - Load balance: {:.2}%", distribution.load_balance() * 100.0);
// Step 2: Create executor for each core
let executors: Vec<_> = (0..NUM_CORES)
.map(|core_id| {
let local_edges = distribution.edges_for_core(core_id);
CoreExecutor::new(core_id as u8, local_edges)
})
.collect();
// Step 3: Parallel execution (in WASM, this would use Web Workers)
let local_results: Vec<_> = executors
.into_iter()
.map(|mut executor| {
executor.compute_local_mincut()
})
.collect();
// Step 4: Aggregate results
let aggregator = ResultAggregator::new(NUM_CORES);
let global_mincut = aggregator.aggregate(
local_results,
&distribution.boundary_edges()
);
println!("Global minimum cut: {}", global_mincut);
Ok(global_mincut)
}Complete example with lock-free coordination:
use ruvector_mincut::agentic::{
SharedCoordinator, CoreTask, CoreResult, CompactCoreState
};
use std::sync::Arc;
use std::thread;
#[cfg(feature = "agentic")]
fn agentic_mincut_demo() -> Result<(), Box<dyn std::error::Error>> {
const NUM_CORES: usize = 256;
// Lock-free coordination using atomics
let coordinator = Arc::new(SharedCoordinator::new(NUM_CORES));
// Generate tasks (one per core)
let tasks = generate_core_tasks(NUM_CORES);
// Spawn threads simulating WASM cores
let handles: Vec<_> = (0..NUM_CORES)
.map(|core_id| {
let coord = Arc::clone(&coordinator);
let task = tasks[core_id].clone();
thread::spawn(move || {
// Each core creates its compact state
let mut state = CompactCoreState::new(CoreConfig {
core_id: core_id as u8,
total_cores: NUM_CORES,
max_vertices: 256,
max_edges: 512,
simd_enabled: true,
});
// Process assigned edges
for edge in task.edges {
state.add_local_edge(edge.0, edge.1);
}
// Compute local minimum cut with SIMD
let local_cut = state.compute_local_cut_simd();
// Report result to coordinator (lock-free)
coord.report_result(core_id, CoreResult {
local_mincut: local_cut,
boundary_size: state.boundary_size(),
vertices_processed: state.vertex_count(),
});
local_cut
})
})
.collect();
// Wait for all cores to complete
let local_cuts: Vec<_> = handles
.into_iter()
.map(|h| h.join().unwrap())
.collect();
// Aggregate using coordinator
let global_mincut = coordinator.aggregate_results(&local_cuts);
println!("✅ Agentic computation complete:");
println!(" - {} cores used", NUM_CORES);
println!(" - Global min cut: {}", global_mincut);
println!(" - Peak memory per core: {} bytes",
std::mem::size_of::<CompactCoreState>());
Ok(())
}
#[cfg(feature = "agentic")]
#[derive(Clone)]
struct CoreTask {
edges: Vec<(u64, u64)>,
}
#[cfg(feature = "agentic")]
fn generate_core_tasks(num_cores: usize) -> Vec<CoreTask> {
// Distribute edges across cores
// In production, use METIS or other graph partitioning
(0..num_cores)
.map(|core_id| {
CoreTask {
edges: vec![
(core_id as u64 * 2, core_id as u64 * 2 + 1),
// Add cross-core edges...
],
}
})
.collect()
}graph TB
subgraph "Agentic Chip - 256 WASM Cores"
subgraph "Core 0 [8KB]"
C0[CompactCoreState<br/>6.7KB]
B0[BitSet256<br/>32 bytes]
end
subgraph "Core 1 [8KB]"
C1[CompactCoreState<br/>6.7KB]
B1[BitSet256<br/>32 bytes]
end
subgraph "Core 2 [8KB]"
C2[CompactCoreState<br/>6.7KB]
B2[BitSet256<br/>32 bytes]
end
subgraph "..."
CD[...]
end
subgraph "Core 255 [8KB]"
C255[CompactCoreState<br/>6.7KB]
B255[BitSet256<br/>32 bytes]
end
end
subgraph "Lock-Free Coordination"
SC[SharedCoordinator<br/>Atomic CAS]
AG[ResultAggregator<br/>Global MinCut]
end
subgraph "SIMD Acceleration"
S1[WASM SIMD128<br/>Boundary Ops]
S2[WASM SIMD128<br/>Popcount/XOR]
end
C0 --> SC
C1 --> SC
C2 --> SC
C255 --> SC
SC --> AG
C0 -.->|uses| S1
B0 -.->|uses| S2
style C0 fill:#e1f5ff
style C1 fill:#e1f5ff
style C2 fill:#e1f5ff
style C255 fill:#e1f5ff
style SC fill:#ffe1e1
style AG fill:#e1ffe1
style S1 fill:#fff4e1
style S2 fill:#fff4e1
Use Case: Leverage cutting-edge algorithms from arXiv:2512.13105 for deterministic exact minimum cut in subpolynomial time.
The DeterministicLocalKCut oracle finds small cuts near seed vertices using BFS without randomization:
use ruvector_mincut::{
DeterministicLocalKCut, LocalKCutQuery, LocalKCutOracle,
DynamicGraph
};
use std::sync::Arc;
fn demonstrate_local_kcut() -> Result<(), Box<dyn std::error::Error>> {
// Build graph
let graph = Arc::new(DynamicGraph::new());
// Create a graph with a small cut around vertices {1, 2, 3}
for i in 1..=3 {
for j in (i+1)..=3 {
graph.insert_edge(i, j, 10.0)?; // Dense cluster
}
}
// Connect to larger graph with weak edge
graph.insert_edge(3, 4, 1.0)?;
for i in 4..=10 {
graph.insert_edge(i, i+1, 10.0)?;
}
// Create deterministic oracle
let oracle = DeterministicLocalKCut::new();
// Query for local cut near vertex 2
let query = LocalKCutQuery {
seed_vertices: vec![2],
budget_k: 5, // Look for cuts ≤ 5
radius: 3, // BFS depth limit
};
let result = oracle.search(&graph, query);
match result {
LocalKCutResult::Found { witness, cut_value } => {
println!("Found local cut with value: {}", cut_value);
println!("Seed: {}", witness.seed());
println!("Boundary size: {}", witness.boundary_size());
// The witness should identify the {1,2,3} cluster
let (s_side, t_side) = witness.materialize_partition();
println!("S-side: {:?}", s_side);
println!("T-side: {:?}", t_side);
}
LocalKCutResult::NoneInLocality => {
println!("No cut ≤ {} found within radius {}", 5, 3);
}
}
Ok(())
}The three-level hierarchy decomposes graphs for efficient dynamic updates:
use ruvector_mincut::{
ThreeLevelHierarchy, ExpanderDecomposition, PreclusterLevel, ClusterLevel
};
fn demonstrate_hierarchy() -> Result<(), Box<dyn std::error::Error>> {
let graph = build_example_graph();
// Build three-level hierarchy
let mut hierarchy = ThreeLevelHierarchy::new(&graph);
// Level 1: Expander Decomposition
// Partition into dense expanders and sparse cuts
hierarchy.compute_expanders(0.5)?; // φ = 0.5 conductance threshold
println!("Expander Level:");
println!(" - {} expanders found", hierarchy.num_expanders());
println!(" - {} sparse cuts", hierarchy.num_sparse_cuts());
// Level 2: Precluster Decomposition
// Further decompose each expander
hierarchy.compute_preclusters()?;
println!("\nPrecluster Level:");
for (idx, precluster) in hierarchy.preclusters().iter().enumerate() {
println!(" Precluster {}: {} vertices, φ = {:.3}",
idx, precluster.size(), precluster.conductance());
}
// Level 3: Cluster Decomposition
// Final recursive decomposition
hierarchy.compute_clusters()?;
println!("\nCluster Level:");
println!(" - {} leaf clusters", hierarchy.num_clusters());
println!(" - Max depth: {}", hierarchy.max_depth());
// Query minimum cut using hierarchy
let min_cut = hierarchy.query_mincut();
println!("\nMinimum cut from hierarchy: {}", min_cut);
// Dynamic update propagation
println!("\n🔄 Inserting edge (10, 20)...");
hierarchy.handle_insertion(10, 20, 1.0)?;
// Only affected levels are recomputed
println!(" - Recomputed {} preclusters", hierarchy.recomputed_count());
Ok(())
}
fn build_example_graph() -> Arc<DynamicGraph> {
let graph = Arc::new(DynamicGraph::new());
// Create multiple dense clusters
for cluster_base in [0, 10, 20, 30] {
for i in 0..5 {
for j in (i+1)..5 {
let u = cluster_base + i;
let v = cluster_base + j;
graph.insert_edge(u, v, 10.0).unwrap();
}
}
}
// Sparse inter-cluster edges
graph.insert_edge(4, 10, 1.0).unwrap();
graph.insert_edge(14, 20, 1.0).unwrap();
graph.insert_edge(24, 30, 1.0).unwrap();
graph
}Compact verifiable certificates prove minimum cut correctness:
use ruvector_mincut::{
MinCutWrapper, CutCertificate, WitnessSummary, DynamicGraph
};
use std::sync::Arc;
fn demonstrate_certificates() -> Result<(), Box<dyn std::error::Error>> {
// Create mincut structure
let graph = Arc::new(DynamicGraph::new());
graph.insert_edge(1, 2, 1.0)?;
graph.insert_edge(2, 3, 1.0)?;
graph.insert_edge(3, 4, 1.0)?;
let mut wrapper = MinCutWrapper::new(graph);
// Query with certificate generation
let result = wrapper.query_with_certificate();
match result {
MinCutResult::Value { cut_value, witness, certificate } => {
println!("Min cut value: {}", cut_value);
// Certificate contains proof of correctness
println!("\n📜 Certificate Details:");
println!(" Version: {}", certificate.version);
println!(" Timestamp: {:?}", certificate.timestamp);
println!(" Witnesses tested: {}", certificate.witnesses.len());
println!(" LocalKCut calls: {}", certificate.localkcut_responses.len());
// Verify certificate
match certificate.verify() {
Ok(()) => println!("✅ Certificate verified successfully"),
Err(e) => println!("❌ Verification failed: {}", e),
}
// Export certificate for external verification
let json = certificate.to_json();
std::fs::write("mincut_certificate.json", json)?;
println!("\n📁 Certificate saved to mincut_certificate.json");
// Witness summary
if let Some(idx) = certificate.best_witness_idx {
let best = &certificate.witnesses[idx];
println!("\n🎯 Best Witness:");
println!(" Seed: {}", best.seed);
println!(" Cut value: {}", best.cut_value);
println!(" Cardinality: {}", best.cardinality);
println!(" Boundary: {}", best.boundary_size);
}
}
MinCutResult::Disconnected => {
println!("Graph is disconnected (min cut = 0)");
}
}
Ok(())
}Handle disconnected components efficiently:
use ruvector_mincut::{FragmentingAlgorithm, DynamicGraph, ConnectivityChecker};
use std::sync::Arc;
fn demonstrate_fragmentation() -> Result<(), Box<dyn std::error::Error>> {
// Create disconnected graph with multiple components
let graph = Arc::new(DynamicGraph::new());
// Component 1: vertices 0-4
for i in 0..5 {
graph.insert_edge(i, (i + 1) % 5, 1.0)?;
}
// Component 2: vertices 10-14
for i in 10..15 {
graph.insert_edge(i, (i + 1 - 10) % 5 + 10, 1.0)?;
}
// Component 3: vertices 20-24
for i in 20..25 {
graph.insert_edge(i, (i + 1 - 20) % 5 + 20, 1.0)?;
}
// Create fragmenting algorithm
let mut fragmenter = FragmentingAlgorithm::new(graph.clone());
// Detect components
fragmenter.detect_components();
println!("Graph Fragmentation:");
println!(" - {} components detected", fragmenter.num_components());
for (idx, component) in fragmenter.components().iter().enumerate() {
println!("\n Component {}:", idx);
println!(" Vertices: {:?}", component.vertices());
println!(" Edges: {}", component.edge_count());
println!(" Internal min cut: {}", component.internal_mincut());
}
// Minimum cut of disconnected graph is 0
let global_mincut = fragmenter.global_mincut();
assert_eq!(global_mincut, 0.0);
println!("\nGlobal minimum cut: {} (disconnected)", global_mincut);
// Now connect two components
println!("\n🔗 Connecting component 0 and 1 with edge (4, 10)...");
graph.insert_edge(4, 10, 2.0)?;
// Update fragmentation
fragmenter.handle_insertion(4, 10)?;
println!(" - {} components now", fragmenter.num_components());
println!(" - New global min cut: {}", fragmenter.global_mincut());
Ok(())
}graph TB
subgraph "Level 0: Original Graph"
G[Graph G<br/>n vertices, m edges]
end
subgraph "Level 1: Expander Decomposition"
E1[Expander 1<br/>φ ≥ 0.5]
E2[Expander 2<br/>φ ≥ 0.5]
E3[Expander 3<br/>φ ≥ 0.5]
SC1[Sparse Cuts<br/>Between Expanders]
end
subgraph "Level 2: Precluster Decomposition"
P1[Precluster 1.1]
P2[Precluster 1.2]
P3[Precluster 2.1]
P4[Precluster 2.2]
P5[Precluster 3.1]
SC2[Sparse Cuts<br/>Within Expanders]
end
subgraph "Level 3: Cluster Decomposition"
C1[Cluster 1.1.1]
C2[Cluster 1.1.2]
C3[Cluster 1.2.1]
C4[Cluster 2.1.1]
C5[Cluster 2.2.1]
C6[Cluster 2.2.2]
C7[Cluster 3.1.1]
end
G --> E1
G --> E2
G --> E3
G -.-> SC1
E1 --> P1
E1 --> P2
E2 --> P3
E2 --> P4
E3 --> P5
E1 -.-> SC2
P1 --> C1
P1 --> C2
P2 --> C3
P3 --> C4
P4 --> C5
P4 --> C6
P5 --> C7
style G fill:#e1f5ff
style E1 fill:#ffe1e1
style E2 fill:#ffe1e1
style E3 fill:#ffe1e1
style P1 fill:#fff4e1
style P2 fill:#fff4e1
style P3 fill:#fff4e1
style P4 fill:#fff4e1
style P5 fill:#fff4e1
style C1 fill:#e1ffe1
style C2 fill:#e1ffe1
style C3 fill:#e1ffe1
style C4 fill:#e1ffe1
style C5 fill:#e1ffe1
style C6 fill:#e1ffe1
style C7 fill:#e1ffe1
style SC1 fill:#f0f0f0,stroke:#ff0000,stroke-width:2px
style SC2 fill:#f0f0f0,stroke:#ff0000,stroke-width:2px
Use Case: When amortized time isn't enough—get O(log³ n) expected worst-case guarantees per operation.
Amortized analysis allows occasional expensive operations. For real-time systems with strict latency requirements, worst-case bounds are essential:
use ruvector_mincut::{PolylogConnectivity, DynamicConnectivity};
fn compare_amortized_vs_worstcase() -> Result<(), Box<dyn std::error::Error>> {
println!("Comparison: Amortized vs Worst-Case Guarantees\n");
// Regular dynamic connectivity (amortized)
let mut amortized = EulerTourTree::new();
// Polylog connectivity (worst-case)
let mut worstcase = PolylogConnectivity::new();
// Both handle the same operations
for i in 0..100 {
amortized.insert_edge(i, i + 1)?;
worstcase.insert_edge(i, i + 1)?;
}
println!("After 100 insertions:");
assert!(amortized.connected(0, 100)?);
assert!(worstcase.connected(0, 100)?);
// Critical difference: latency distribution
println!("\nLatency Characteristics:");
println!(" Amortized (ETT):");
println!(" - Average: O(log n)");
println!(" - Worst-case: O(n) for rebuilding");
println!(" - ⚠️ Occasional spikes possible");
println!("\n Worst-Case (Polylog):");
println!(" - Average: O(log³ n) expected");
println!(" - Worst-case: O(log³ n) expected");
println!(" - ✅ Predictable latency");
// Use case decision matrix
println!("\n📊 Use Case Recommendations:");
println!(" Use Amortized when:");
println!(" - Batch processing is acceptable");
println!(" - Average-case performance matters most");
println!(" - Occasional delays are tolerable");
println!("\n Use Worst-Case when:");
println!(" - Real-time guarantees are critical");
println!(" - Latency SLAs must be met");
println!(" - Safety-critical systems");
println!(" - Financial trading systems");
Ok(())
}PolylogConnectivity maintains a hierarchy of levels with decreasing edge counts:
use ruvector_mincut::{PolylogConnectivity, LevelStats};
fn visualize_level_hierarchy() -> Result<(), Box<dyn std::error::Error>> {
let mut conn = PolylogConnectivity::new();
// Build a graph with 1000 vertices and 10000 edges
for i in 0..1000 {
conn.insert_edge(i, (i * 7 + 13) % 1000)?;
conn.insert_edge(i, (i * 11 + 17) % 1000)?;
}
// Inspect level hierarchy
println!("Level Hierarchy (bottom-up):\n");
for level in 0..conn.num_levels() {
let stats = conn.level_stats(level);
println!("Level {}: ", level);
println!(" Edges: {}", stats.edge_count);
println!(" Sparsification ratio: {:.3}", stats.sparsification_ratio);
println!(" Max degree: {}", stats.max_degree);
println!(" Components: {}", stats.num_components);
println!();
}
// Visualize structure
println!("Conceptual Structure:");
println!(" Level 0 (bottom): Full graph, ~10000 edges");
println!(" Level 1: Sparsified, ~5000 edges");
println!(" Level 2: Sparsified, ~2500 edges");
println!(" Level 3: Sparsified, ~1250 edges");
println!(" ...");
println!(" Level k (top): O(n) edges, spanning forest");
Ok(())
}Direct performance comparison:
use ruvector_mincut::{PolylogConnectivity, EulerTourTree};
use std::time::Instant;
fn benchmark_connectivity_structures() -> Result<(), Box<dyn std::error::Error>> {
const N: usize = 10_000;
const OPS: usize = 1_000;
println!("Benchmarking Connectivity Structures (n={}, ops={})\n", N, OPS);
// Benchmark Euler Tour Tree (amortized)
let mut ett = EulerTourTree::new();
let start = Instant::now();
for i in 0..N {
ett.insert_edge(i as u64, ((i + 1) % N) as u64)?;
}
for _ in 0..OPS {
ett.connected(0, N as u64 / 2)?;
}
let ett_time = start.elapsed();
println!("Euler Tour Tree:");
println!(" Time: {:?}", ett_time);
println!(" Avg query: {:?}", ett_time / OPS as u32);
// Benchmark Polylog Connectivity (worst-case)
let mut polylog = PolylogConnectivity::new();
let start = Instant::now();
for i in 0..N {
polylog.insert_edge(i as u64, ((i + 1) % N) as u64)?;
}
for _ in 0..OPS {
polylog.connected(0, N as u64 / 2)?;
}
let polylog_time = start.elapsed();
println!("\nPolylog Connectivity:");
println!(" Time: {:?}", polylog_time);
println!(" Avg query: {:?}", polylog_time / OPS as u32);
// Analyze results
let ratio = polylog_time.as_nanos() as f64 / ett_time.as_nanos() as f64;
println!("\nSpeedup factor: {:.2}x", ratio);
if ratio < 2.0 {
println!("✅ Polylog overhead is acceptable for worst-case guarantees");
} else {
println!("⚠️ Consider amortized structure if worst-case not required");
}
Ok(())
}use ruvector_mincut::PolylogConnectivity;
use std::time::{Duration, Instant};
/// Real-time network monitor with strict latency SLA
struct RealTimeMonitor {
connectivity: PolylogConnectivity,
max_latency: Duration,
violations: usize,
}
impl RealTimeMonitor {
fn new(max_latency_ms: u64) -> Self {
Self {
connectivity: PolylogConnectivity::new(),
max_latency: Duration::from_millis(max_latency_ms),
violations: 0,
}
}
/// Handle edge update with latency monitoring
fn update_edge(&mut self, u: u64, v: u64, insert: bool) -> Result<(), Box<dyn std::error::Error>> {
let start = Instant::now();
if insert {
self.connectivity.insert_edge(u, v)?;
} else {
self.connectivity.delete_edge(u, v)?;
}
let latency = start.elapsed();
if latency > self.max_latency {
self.violations += 1;
eprintln!("⚠️ SLA violation: {}μs > {}μs",
latency.as_micros(), self.max_latency.as_micros());
}
Ok(())
}
/// Check connectivity with latency guarantee
fn check_connected(&mut self, u: u64, v: u64) -> Result<bool, Box<dyn std::error::Error>> {
let start = Instant::now();
let result = self.connectivity.connected(u, v)?;
let latency = start.elapsed();
if latency > self.max_latency {
self.violations += 1;
}
Ok(result)
}
fn report_sla_compliance(&self) -> f64 {
// Return percentage of operations within SLA
let total_ops = 1000; // Track this properly in production
((total_ops - self.violations) as f64 / total_ops as f64) * 100.0
}
}
fn main() -> Result<(), Box<dyn std::error::Error>> {
let mut monitor = RealTimeMonitor::new(100); // 100ms SLA
// Simulate real-time operations
for i in 0..1000 {
monitor.update_edge(i, i + 1, true)?;
if i % 100 == 0 {
monitor.check_connected(0, i)?;
}
}
println!("SLA Compliance: {:.2}%", monitor.report_sla_compliance());
println!("Violations: {}", monitor.violations);
Ok(())
}Use Case: Efficiently compute (1+ε)-approximate minimum cuts for massive graphs using spectral sparsification.
Reduce graph size while preserving cut structure:
use ruvector_mincut::{ApproxMinCut, SparsificationMethod};
fn demonstrate_sparsification() -> Result<(), Box<dyn std::error::Error>> {
// Create large graph
let mut approx = ApproxMinCut::with_epsilon(0.1);
// Add many edges
for i in 0..10_000 {
for j in 0..5 {
let target = (i + j * 1000) % 10_000;
approx.insert_edge(i, target, 1.0)?;
}
}
println!("Original graph:");
println!(" Vertices: {}", approx.num_vertices());
println!(" Edges: {}", approx.num_edges());
// Apply spectral sparsification
let sparsifier = approx.sparsify(SparsificationMethod::EffectiveResistance)?;
println!("\nSparsified graph:");
println!(" Vertices: {}", sparsifier.num_vertices());
println!(" Edges: {}", sparsifier.num_edges());
println!(" Reduction: {:.1}%",
(1.0 - sparsifier.num_edges() as f64 / approx.num_edges() as f64) * 100.0);
// Compute approximate minimum cut
let result = sparsifier.min_cut();
println!("\nApproximate minimum cut:");
println!(" Value: {}", result.value);
println!(" Lower bound: {}", result.lower_bound);
println!(" Upper bound: {}", result.upper_bound);
println!(" Approximation ratio: {:.3}", result.approximation_ratio);
println!(" Is exact: {}", result.is_exact);
Ok(())
}Balance accuracy vs. performance by tuning ε:
use ruvector_mincut::ApproxMinCut;
fn epsilon_tuning_guide() -> Result<(), Box<dyn std::error::Error>> {
println!("Epsilon (ε) Tuning Guide\n");
println!("Sparsifier size: O(n log n / ε²)");
println!("Approximation: (1+ε)-approximate\n");
// Test different epsilon values
let epsilons = vec![0.01, 0.05, 0.1, 0.2, 0.5];
for &eps in &epsilons {
let mut approx = ApproxMinCut::with_epsilon(eps);
// Build test graph
for i in 0..1000 {
approx.insert_edge(i, (i + 1) % 1000, 1.0)?;
approx.insert_edge(i, (i + 2) % 1000, 1.0)?;
}
let sparsifier = approx.sparsify(SparsificationMethod::EffectiveResistance)?;
let edges_kept = sparsifier.num_edges();
let theoretical = ((1000.0 * 7.0) / (eps * eps)) as usize;
println!("ε = {:.2}:", eps);
println!(" Edges kept: {}", edges_kept);
println!(" Theoretical: ~{}", theoretical);
println!(" Approximation: [{:.2}x, {:.2}x]",
1.0, 1.0 + eps);
println!();
}
println!("Recommendations:");
println!(" ε = 0.01: High accuracy (1.01x), 10,000x edges");
println!(" ε = 0.05: Good balance (1.05x), 400x edges");
println!(" ε = 0.10: Fast (1.10x), 100x edges ✅ DEFAULT");
println!(" ε = 0.20: Very fast (1.20x), 25x edges");
println!(" ε = 0.50: Extreme speed (1.50x), 4x edges");
Ok(())
}use ruvector_mincut::{ApproxMinCut, MinCutBuilder};
use std::time::Instant;
struct BenchmarkResult {
method: String,
edges: usize,
memory_mb: f64,
time_ms: u64,
min_cut: f64,
error: f64,
}
fn benchmark_accuracy_vs_memory() -> Result<Vec<BenchmarkResult>, Box<dyn std::error::Error>> {
let mut results = Vec::new();
// Test graph: 10,000 vertices, 50,000 edges
let edges: Vec<_> = (0..10_000)
.flat_map(|i| {
(0..5).map(move |j| {
(i, (i + j * 1000) % 10_000, 1.0)
})
})
.collect();
// Exact algorithm (baseline)
{
let start = Instant::now();
let mut exact = MinCutBuilder::new()
.exact()
.with_edges(edges.clone())
.build()?;
let min_cut = exact.min_cut_value();
let time = start.elapsed().as_millis() as u64;
results.push(BenchmarkResult {
method: "Exact".to_string(),
edges: 50_000,
memory_mb: 50_000.0 * 24.0 / 1_048_576.0, // ~24 bytes per edge
time_ms: time,
min_cut,
error: 0.0,
});
}
// Approximate with different ε values
for &eps in &[0.05, 0.1, 0.2] {
let start = Instant::now();
let mut approx = ApproxMinCut::with_epsilon(eps);
for &(u, v, w) in &edges {
approx.insert_edge(u, v, w)?;
}
let sparsifier = approx.sparsify(SparsificationMethod::EffectiveResistance)?;
let result = sparsifier.min_cut();
let time = start.elapsed().as_millis() as u64;
let exact_value = results[0].min_cut;
let error = ((result.value - exact_value) / exact_value * 100.0).abs();
results.push(BenchmarkResult {
method: format!("Approximate ε={}", eps),
edges: sparsifier.num_edges(),
memory_mb: sparsifier.num_edges() as f64 * 24.0 / 1_048_576.0,
time_ms: time,
min_cut: result.value,
error,
});
}
// Print comparison
println!("Memory vs Accuracy Trade-offs\n");
println!("{:<20} {:>10} {:>12} {:>10} {:>10} {:>10}",
"Method", "Edges", "Memory (MB)", "Time (ms)", "Min Cut", "Error %");
println!("{}", "-".repeat(82));
for r in &results {
println!("{:<20} {:>10} {:>12.2} {:>10} {:>10.2} {:>10.2}",
r.method, r.edges, r.memory_mb, r.time_ms, r.min_cut, r.error);
}
Ok(results)
}Process a million-edge graph efficiently:
use ruvector_mincut::{ApproxMinCut, SparsificationMethod};
use std::time::Instant;
fn process_large_scale_graph() -> Result<(), Box<dyn std::error::Error>> {
println!("Processing Large-Scale Graph");
println!("Target: 100,000 vertices, 1,000,000 edges\n");
let mut approx = ApproxMinCut::with_epsilon(0.1);
// Build graph incrementally
println!("📥 Loading graph...");
let start = Instant::now();
for i in 0..100_000 {
// Each vertex connects to 10 random neighbors
for j in 0..10 {
let target = (i + j * 10_000 + 1) % 100_000;
approx.insert_edge(i, target, 1.0)?;
}
if i % 10_000 == 0 {
println!(" {} vertices processed...", i);
}
}
let load_time = start.elapsed();
println!("✅ Graph loaded in {:?}", load_time);
println!(" Vertices: {}", approx.num_vertices());
println!(" Edges: {}", approx.num_edges());
// Sparsify
println!("\n🔧 Sparsifying graph...");
let start = Instant::now();
let sparsifier = approx.sparsify(SparsificationMethod::EffectiveResistance)?;
let sparsify_time = start.elapsed();
println!("✅ Sparsification complete in {:?}", sparsify_time);
println!(" Edges reduced: {} → {}",
approx.num_edges(), sparsifier.num_edges());
println!(" Reduction ratio: {:.1}%",
(1.0 - sparsifier.num_edges() as f64 / approx.num_edges() as f64) * 100.0);
// Compute minimum cut on sparsifier
println!("\n🔍 Computing minimum cut...");
let start = Instant::now();
let result = sparsifier.min_cut();
let compute_time = start.elapsed();
println!("✅ Minimum cut computed in {:?}", compute_time);
println!("\n📊 Results:");
println!(" Cut value: {}", result.value);
println!(" Bounds: [{}, {}]", result.lower_bound, result.upper_bound);
println!(" Approximation: {:.3}x", result.approximation_ratio);
// Total metrics
let total_time = load_time + sparsify_time + compute_time;
println!("\n⏱️ Performance Summary:");
println!(" Total time: {:?}", total_time);
println!(" Load: {:.1}%", load_time.as_secs_f64() / total_time.as_secs_f64() * 100.0);
println!(" Sparsify: {:.1}%", sparsify_time.as_secs_f64() / total_time.as_secs_f64() * 100.0);
println!(" Compute: {:.1}%", compute_time.as_secs_f64() / total_time.as_secs_f64() * 100.0);
Ok(())
}Use Case: Integrate ruvector-mincut with custom data sources and existing graph databases.
Seamless integration with the ruvector-graph crate:
use ruvector_mincut::{MinCutBuilder, RuVectorGraphAnalyzer};
use ruvector_graph::{GraphDB, VectorConfig};
fn integrate_with_ruvector_graph() -> Result<(), Box<dyn std::error::Error>> {
// Create vector graph database
let config = VectorConfig {
dimensions: 128,
metric: "cosine",
};
let mut graphdb = GraphDB::new(config)?;
// Add vectors (e.g., document embeddings)
for i in 0..1000 {
let vector = generate_random_vector(128);
graphdb.add_vector(i, vector)?;
}
// Build k-NN graph
graphdb.build_knn_graph(k=10)?;
// Create analyzer with minimum cut
let mut analyzer = RuVectorGraphAnalyzer::from_graphdb(&graphdb)?;
// Analyze connectivity
let min_cut = analyzer.min_cut_value();
println!("k-NN graph minimum cut: {}", min_cut);
// Find communities
let communities = analyzer.detect_communities(min_size=5);
println!("Found {} communities", communities.len());
// Identify bridges (critical connections)
let bridges = analyzer.find_bridges();
println!("Critical connections: {} bridges", bridges.len());
for (i, &(u, v)) in bridges.iter().take(5).enumerate() {
println!(" Bridge {}: ({}, {})", i+1, u, v);
}
Ok(())
}
fn generate_random_vector(dim: usize) -> Vec<f32> {
(0..dim).map(|_| rand::random::<f32>()).collect()
}Handle continuous graph updates from external sources:
use ruvector_mincut::{MinCutBuilder, DynamicMinCut};
use std::sync::mpsc::{channel, Sender, Receiver};
use std::thread;
use std::time::Duration;
#[derive(Debug)]
enum GraphUpdate {
InsertEdge(u64, u64, f64),
DeleteEdge(u64, u64),
Query,
Shutdown,
}
struct StreamingMinCut {
mincut: Box<dyn DynamicMinCut>,
receiver: Receiver<GraphUpdate>,
}
impl StreamingMinCut {
fn new(receiver: Receiver<GraphUpdate>) -> Self {
let mincut = MinCutBuilder::new()
.exact()
.build()
.unwrap();
Self { mincut, receiver }
}
fn run(&mut self) -> Result<(), Box<dyn std::error::Error>> {
println!("🎧 Streaming MinCut Service Started");
loop {
match self.receiver.recv()? {
GraphUpdate::InsertEdge(u, v, w) => {
self.mincut.insert_edge(u, v, w)?;
println!("✅ Inserted edge ({}, {})", u, v);
}
GraphUpdate::DeleteEdge(u, v) => {
self.mincut.delete_edge(u, v)?;
println!("❌ Deleted edge ({}, {})", u, v);
}
GraphUpdate::Query => {
let cut = self.mincut.min_cut_value();
println!("📊 Current min cut: {}", cut);
}
GraphUpdate::Shutdown => {
println!("🛑 Shutting down...");
break;
}
}
}
Ok(())
}
}
fn demonstrate_streaming() -> Result<(), Box<dyn std::error::Error>> {
let (tx, rx) = channel();
// Spawn service thread
let service_handle = thread::spawn(move || {
let mut service = StreamingMinCut::new(rx);
service.run().unwrap();
});
// Simulate streaming updates from external source
simulate_graph_stream(tx)?;
service_handle.join().unwrap();
Ok(())
}
fn simulate_graph_stream(tx: Sender<GraphUpdate>) -> Result<(), Box<dyn std::error::Error>> {
// Simulate Kafka/Redis stream
for i in 0..100 {
thread::sleep(Duration::from_millis(10));
tx.send(GraphUpdate::InsertEdge(i, i + 1, 1.0))?;
if i % 10 == 0 {
tx.send(GraphUpdate::Query)?;
}
}
// Cleanup
tx.send(GraphUpdate::DeleteEdge(50, 51))?;
tx.send(GraphUpdate::Query)?;
tx.send(GraphUpdate::Shutdown)?;
Ok(())
}Efficient batch processing for high-throughput scenarios:
use ruvector_mincut::{MinCutBuilder, DynamicMinCut};
use std::collections::VecDeque;
struct BatchProcessor {
mincut: Box<dyn DynamicMinCut>,
insert_buffer: VecDeque<(u64, u64, f64)>,
delete_buffer: VecDeque<(u64, u64)>,
batch_size: usize,
}
impl BatchProcessor {
fn new(batch_size: usize) -> Self {
let mincut = MinCutBuilder::new()
.exact()
.build()
.unwrap();
Self {
mincut,
insert_buffer: VecDeque::new(),
delete_buffer: VecDeque::new(),
batch_size,
}
}
fn insert_edge(&mut self, u: u64, v: u64, w: f64) {
self.insert_buffer.push_back((u, v, w));
if self.insert_buffer.len() >= self.batch_size {
self.flush_inserts();
}
}
fn delete_edge(&mut self, u: u64, v: u64) {
self.delete_buffer.push_back((u, v));
if self.delete_buffer.len() >= self.batch_size {
self.flush_deletes();
}
}
fn flush_inserts(&mut self) {
if self.insert_buffer.is_empty() {
return;
}
println!("🔄 Flushing {} insertions...", self.insert_buffer.len());
// Batch API for efficiency
let edges: Vec<_> = self.insert_buffer.drain(..).collect();
self.mincut.batch_insert_edges(&edges).unwrap();
println!("✅ Batch inserted");
}
fn flush_deletes(&mut self) {
if self.delete_buffer.is_empty() {
return;
}
println!("🔄 Flushing {} deletions...", self.delete_buffer.len());
let edges: Vec<_> = self.delete_buffer.drain(..).collect();
self.mincut.batch_delete_edges(&edges).unwrap();
println!("✅ Batch deleted");
}
fn query(&mut self) -> f64 {
// Flush pending updates before query
self.flush_inserts();
self.flush_deletes();
self.mincut.min_cut_value()
}
}
fn demonstrate_batch_processing() -> Result<(), Box<dyn std::error::Error>> {
let mut processor = BatchProcessor::new(100);
println!("Adding 1000 edges with batch size 100\n");
// Add many edges
for i in 0..1000 {
processor.insert_edge(i, i + 1, 1.0);
}
// Force flush and query
let cut = processor.query();
println!("\nMinimum cut: {}", cut);
// Remove some edges
for i in (0..1000).step_by(10) {
processor.delete_edge(i, i + 1);
}
let cut = processor.query();
println!("After deletions: {}", cut);
Ok(())
}use ruvector_mincut::{MinCutBuilder, DynamicMinCut};
use std::io::{BufRead, BufReader};
use std::fs::File;
/// Adapter for loading graphs from various formats
trait GraphLoader {
fn load_into(&self, mincut: &mut Box<dyn DynamicMinCut>) -> Result<(), Box<dyn std::error::Error>>;
}
/// Load from edge list format (CSV, TSV, etc.)
struct EdgeListLoader {
file_path: String,
delimiter: char,
}
impl GraphLoader for EdgeListLoader {
fn load_into(&self, mincut: &mut Box<dyn DynamicMinCut>) -> Result<(), Box<dyn std::error::Error>> {
let file = File::open(&self.file_path)?;
let reader = BufReader::new(file);
for (line_num, line) in reader.lines().enumerate() {
let line = line?;
// Skip comments
if line.starts_with('#') {
continue;
}
let parts: Vec<_> = line.split(self.delimiter).collect();
if parts.len() < 2 {
eprintln!("Warning: Invalid line {}: {}", line_num, line);
continue;
}
let u: u64 = parts[0].trim().parse()?;
let v: u64 = parts[1].trim().parse()?;
let w: f64 = if parts.len() > 2 {
parts[2].trim().parse()?
} else {
1.0
};
mincut.insert_edge(u, v, w)?;
}
Ok(())
}
}
/// Load from adjacency list format
struct AdjacencyListLoader {
file_path: String,
}
impl GraphLoader for AdjacencyListLoader {
fn load_into(&self, mincut: &mut Box<dyn DynamicMinCut>) -> Result<(), Box<dyn std::error::Error>> {
let file = File::open(&self.file_path)?;
let reader = BufReader::new(file);
for line in reader.lines() {
let line = line?;
let parts: Vec<_> = line.split_whitespace().collect();
if parts.is_empty() {
continue;
}
let u: u64 = parts[0].parse()?;
for v_str in &parts[1..] {
let v: u64 = v_str.parse()?;
mincut.insert_edge(u, v, 1.0)?;
}
}
Ok(())
}
}
fn demonstrate_data_loading() -> Result<(), Box<dyn std::error::Error>> {
// Load from edge list
let edge_list_loader = EdgeListLoader {
file_path: "graph.csv".to_string(),
delimiter: ',',
};
let mut mincut = MinCutBuilder::new()
.exact()
.build()?;
println!("Loading from graph.csv...");
edge_list_loader.load_into(&mut mincut)?;
println!("Loaded {} vertices, {} edges",
mincut.num_vertices(), mincut.num_edges());
println!("Minimum cut: {}", mincut.min_cut_value());
// Load from adjacency list
let adj_loader = AdjacencyListLoader {
file_path: "graph.adj".to_string(),
};
let mut mincut2 = MinCutBuilder::new()
.exact()
.build()?;
println!("\nLoading from graph.adj...");
adj_loader.load_into(&mut mincut2)?;
println!("Loaded {} vertices, {} edges",
mincut2.num_vertices(), mincut2.num_edges());
Ok(())
}This guide covered advanced use cases for ruvector-mincut:
- Real-Time Network Monitoring: Event-driven alerts with threshold-based monitoring for live infrastructure
- 256-Core Agentic Chip: Ultra-compact structures (6.7KB/core) for massively parallel WASM deployment
- December 2025 Papers: Cutting-edge deterministic algorithms with verification certificates
- Worst-Case Connectivity: O(log³ n) guarantees for real-time systems with strict latency SLAs
- Large Graph Approximation: Spectral sparsification for million-edge graphs with tunable accuracy
- Custom Integration: Adapters for streaming updates, batch processing, and external data sources
For more information:
Built with ❤️ by ruv.io