Apply suggestions from code review

RoRoJ · jcirinosclwy · web-flow · commit 2273f585b3d8 · 2025-03-06T09:55:00.000+01:00
Co-authored-by: Jessica &lt;113192637+jcirinosclwy@users.noreply.github.com&gt;
diff --git a/pages/interlink/how-to/complete-provisioning.mdx b/pages/interlink/how-to/complete-provisioning.mdx
@@ -20,7 +20,7 @@ InterLink is currently in [Private Beta](https://www.scaleway.com/en/betas/), an
 
 After you have [ordered your InterLink](/interlink/how-to/order-interlink), further action is required on both the customer side and the [partner](/interlink/concepts/#partner) side before the InterLink is provisioned and ready for active use. This page walks you through the steps to take and how to deal with potential problems that could arise.
 
-<Lightbox src="scaleway-interlink-ordering.webp" alt="A four step flow chart shows the following steps: 1. User orders InterLink via Scaleway, 2. User requests InterLink from partner, 3. Partner accepts InterLink request, 4. Partner provisions InterLink." />
+<Lightbox src="scaleway-interlink-ordering.webp" alt="A four-step flow chart shows the following steps: 1. User orders InterLink via Scaleway, 2. User requests InterLink from partner, 3. Partner accepts InterLink request, 4. Partner provisions InterLink." />
 
 <Macro id="requirements" />
 
@@ -36,7 +36,7 @@ After ordering the InterLink from Scaleway, you **must** contact your chosen par
 
 2. Click on the InterLink that you want to finish provisioning. The InterLink's **Overview** page displays.
 
-<Lightbox src="scaleway-interlink-overview-requesting.webp" alt="A screen in the Scaleway console show's an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status." />
+<Lightbox src="scaleway-interlink-overview-requesting.webp" alt="A screen in the Scaleway console shows an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status." />
 
 3. Note down the [pairing key](/interlink/concepts/#pairing-key) for your InterLink. This is a unique identification number which the partner will need in order to provision your InterLink.
 
@@ -50,7 +50,7 @@ Your InterLink will remain in `Requested` status until the partner responds to y
 
 ## Wait for partner to accept InterLink request
 
-Once you have requested the InterLink  from your partner, you must wait for them to respond to your request. There is no further action for you to take at this point. You can keep track of your InterLink's [status](/interlink/reference-content/statuses/) via the [InterLink listing](https://console.scaleway.com/interlink/links) in the Scaleway console.
+Once you have requested the InterLink from your partner, you must wait for them to respond to your request. There is no further action for you to take at this point. You can keep track of your InterLink's [status](/interlink/reference-content/statuses/) via the [InterLink listing](https://console.scaleway.com/interlink/links) in the Scaleway console.
 
 <Lightbox src="scaleway-interlink-listing.webp" alt="A screen in the Scaleway console shows a listing of InterLinks, with the following information: name, status, partner, location, region and bandwidth." />
 
@@ -67,7 +67,7 @@ If your InterLink does not move to `Provisioning` status, you may see one of the
 
 ## Partner provisions InterLink
 
-When the partner has finished provisioning your InterLink, it moves to `Active` status. This indicates that the physical link and necessary accompanying configuration has been completed on the partner's side, and your InterLink is ready for use.
+When the partner has finished provisioning your InterLink, it moves to `Active` status. This indicates that the physical link and necessary accompanying configuration have been completed on the partner's side, and your InterLink is ready for use.
 
 You must still configure your InterLink by attaching it to a VPC, attaching an allowed routes list, and activating route propagation, before traffic can flow over the InterLink. For help with these steps, see our documentation on [How to configure your InterLink](/interlink/reference-content/configuring/).
 
diff --git a/pages/interlink/how-to/configure-interlink.mdx b/pages/interlink/how-to/configure-interlink.mdx
@@ -24,7 +24,7 @@ Once your InterLink has been [provisioned](/interlink/how-to/complete-provisioni
 - Create and attach an allowed routes list
 - Activate route propagation
 
-<Lightbox src="scaleway-interlink-config.webp" alt="A four step flow chart shows the following steps: 1. Create InterLink, 2. Attach VPC, 3. Attach allowed routes list, 4. Activate route propagation. After these steps are complete, traffic can flow across the InterLink" />
+<Lightbox src="scaleway-interlink-config.webp" alt="A four-step flow chart shows the following steps: 1. Create InterLink, 2. Attach VPC, 3. Attach allowed routes list, 4. Activate route propagation. After these steps are complete, traffic can flow across the InterLink" />
 
 This document explains how to complete these configuration steps with the Scaleway console.
 
@@ -42,7 +42,7 @@ Attaching an InterLink to a VPC allows you to complete the connection from your
 
 2. Click on the InterLink that you want to configure. The InterLink's **Overview** page displays.
 
-    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console show's an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
+    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console shows an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
 
 3. In the **Attached VPC** section, click **Attach VPC**. A pop-up displays:
 
@@ -73,7 +73,7 @@ See the dedicated documentation on [creating an allowed routes list](/interlink/
 1. Click **InterLink** in the **Network** section of the [Scaleway console](https://console.scaleway.com) side menu. A listing of your InterLinks displays.
 
 2. Click on the InterLink that you want to configure. The InterLink's **Overview** page displays.
-    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console show's an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
+    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console shows an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
 
 3. In the **Route propagation** section, click **Attach allowed routes list**. A pop-up displays.
 
@@ -95,7 +95,7 @@ Once you have attached a VPC and attached an allowed routes list, you can activa
 
 2. Click on the InterLink that you want to configure. The InterLink's **Overview** page displays.
 
-    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console show's an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
+    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console shows an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
 
 3. In the **Route propagation** section, use the toggle <Icon name="toggle" /> to turn route propagation **ON**.  
 
@@ -135,7 +135,7 @@ It is not possible to modify settings that were defined at the time of creating
     If route propagation was activated, it will be automatically deactivated when you detach the VPC.
     </Message>
 
-4. Click **Detach VPC**
+4. Click **Detach VPC**.
 
     The VPC is detached, and you are returned to the InterLink's **Overview** page. No traffic can currently flow over the InterLink, and all associated routes are removed from the VPC's route table.
 
@@ -145,13 +145,13 @@ It is not possible to modify settings that were defined at the time of creating
 
     <Lightbox src="scaleway-interlink-attach-vpc.webp" alt="A screen in the Scaleway console invites the user to attach a VPC to complete the connection from their external infrastructure, across the InterLink to their Scaleway resources. A dropdown menu allows a VPC to be selected. A banner reminds users to check any attached route filter lists for compatibility with the selected VPC." />
  
-4. Select one of your existing VPCs from the dropdown list. It must be in the same region as the InterLink. Alternatively, click **+ Create VPC** to create and attach a new VPC.
+6. Select one of your existing VPCs from the dropdown list. It must be in the same region as the InterLink. Alternatively, click **+ Create VPC** to create and attach a new VPC.
 
     <Message type="tip">
     Ensure that the allowed routes list that is attached to the InterLink is suitable for the VPC you are attaching. Remember that the outgoing routes in the list should correspond to the route announcements to whitelist from the VPC itself.
     </Message>
 
-5. Click **Attach VPC**
+7. Click **Attach VPC**.
 
     The VPC is attached and you are returned to the InterLink's **Overview** page. Remember to check the Allowed routes list and activate route propagation so that traffic can flow across the InterLink.
 
@@ -206,9 +206,3 @@ The list is modified and modifications are immediately applied.
 4. Click **Deactivate**.
 
     Route propagation is deactivated, and you are returned to your InterLink's overview page. 
-
-
-
-
-
-
diff --git a/pages/interlink/how-to/create-allowed-routes-list.mdx b/pages/interlink/how-to/create-allowed-routes-list.mdx
@@ -48,7 +48,7 @@ Learn more about routing across an InterLink in our [detailed overview](/interli
         <Message type="tip">
         Routes within these destinations will be propagated, allowing traffic from your external infrastructure to be routed via InterLink to your VPC. For example, adding `172.16.4.0/22` whitelists all 1,024 IPs in this block, from `172.16.4.0` to `172.16.7.255`.
 
-        IPv4 and IPv6 routes must be defined separately..
+        IPv4 and IPv6 routes must be defined separately.
         </Message>
 
 7. Whitelist the incoming routes to allow, in the same way you did for outgoing routes. Outgoing routes concern announcements to accept from the external infrastructure. Traffic can be routed via InterLink from your Scaleway VPC to your external infrastructure along these routes.
diff --git a/pages/interlink/how-to/delete-interlink.mdx b/pages/interlink/how-to/delete-interlink.mdx
@@ -26,7 +26,7 @@ You can delete your InterLink at any time. Action is required on both the Scalew
 
 2. Click on the InterLink that you want to delete. The InterLink's **Overview** page displays.
 
-    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console show's an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
+    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console shows an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
 
 3. [Deactivate route propagation](/interlink/how-to/configure-interlink/#how-to-deactivate-route-propagation).
 
@@ -36,7 +36,7 @@ You can delete your InterLink at any time. Action is required on both the Scalew
 
 5. Type **DELETE** in the box, and click **Delete InterLink**.
 
-        You are returned to the InterLink's **Overview** page, where it's status now shows as **Deprovisioning**. Scaleway stops billing you for your InterLink at this point, and it can no longer be configured, un-deleted, or used to route traffic.
+        You are returned to the InterLink's **Overview** page, where its status now shows as **Deprovisioning**. Scaleway stops billing you for your InterLink at this point, and it can no longer be configured, un-deleted, or used to route traffic.
 
 6. Contact your partner to request that they delete the InterLink resource on their side. They may continue to bill you until you do so, and they deprovision the resource on their side. To get in touch with the partner, you can use the same contact information that you used when [requesting the InterLink from the partner](/interlink/how-to/complete-provisioning/).
 
diff --git a/pages/interlink/how-to/order-interlink.mdx b/pages/interlink/how-to/order-interlink.mdx
@@ -43,9 +43,9 @@ This guide takes you through the process of ordering an InterLink via the Scalew
 
 4. Select a [partner](/interlink/concepts/#partner). To establish an InterLink connection via a partner, generally you must be client of that partner, e.g. with your infrastructure in their datacenter, or on your own premises using the partner as a network provider. [Get help with choosing a partner](/interlink/reference-content/overview/#hosted-interlinks).
 
-5. Choose a [region](/interlink/concepts/#partner) for your InterLink. This must correspond to the Scaleway VPC you want to attach later.
+5. Choose a [region](/interlink/concepts/#region) for your InterLink. This must correspond to the Scaleway VPC you want to attach later.
 
-6. Choose a [location](/interlink/concepts/#partner) for your InterLink. This represents the physical location where the connection to Scaleway's network will be established.
+6. Choose a [location](/interlink/concepts/#location) for your InterLink. This represents the physical location where the connection to Scaleway's network will be established.
 
 7. Choose a [bandwidth](/interlink/concepts/#bandwidth) amount. This represents the maximum bandwidth that will be available over the InterLink.
 
diff --git a/pages/interlink/quickstart.mdx b/pages/interlink/quickstart.mdx
@@ -39,11 +39,11 @@ InterLink is Scaleway's product to let you create a secure, private connection b
 
 3. Select a [connection type](/interlink/concepts/#connection-type), the type of physical InterLink connection. For now, only **hosted** connections are available.
 
-4. Select a [partner](/interlink/concepts/#partner) to facilitate the physical connection between the external infrastructure and the Scaleway VPC. Generally you must be client of the chosen partner, e.g. with your infrastructure in their datacenter, or on your own premises using the partner as a network provider. [Get help with choosing a partner](/interlink/reference-content/overview/#hosted-interlinks).
+4. Select a [partner](/interlink/concepts/#partner) to facilitate the physical connection between the external infrastructure and the Scaleway VPC. Generally, you must be client of the chosen partner, e.g. with your infrastructure in their datacenter, or on your own premises using the partner as a network provider. [Get help with choosing a partner](/interlink/reference-content/overview/#hosted-interlinks).
 
-5. Choose a [region](/interlink/concepts/#partner) for your InterLink. This must correspond to the Scaleway VPC you want to attach later.
+5. Choose a [region](/interlink/concepts/#region) for your InterLink. This must correspond to the Scaleway VPC you want to attach later.
 
-6. Choose a [location](/interlink/concepts/#partner) for your InterLink. This represents the physical location where the connection to Scaleway's network will be established.
+6. Choose a [location](/interlink/concepts/#location) for your InterLink. This represents the physical location where the connection to Scaleway's network will be established.
 
 7. Choose a [bandwidth](/interlink/concepts/#bandwidth) amount. This represents the maximum bandwidth that will be available over the InterLink.
 
@@ -97,7 +97,7 @@ Attaching an InterLink to a VPC allows you to complete the connection from your
 
 2. Click on the InterLink that you want to configure. The InterLink's **Overview** page displays.
 
-    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console show's an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
+    <Lightbox src="scaleway-interlink-overview-up.webp" alt="A screen in the Scaleway console shows an overview of an InterLink's partner, location, region, bandwidth, creation date, pairing key, and IPv4/IPv6 connectivity status. Underneath are the 'Attached VPC', 'Route propagation' and 'Tags' panels." />
 
 3. In the **Attached VPC** section, click **Attach VPC**. A pop-up displays:
 
@@ -149,7 +149,7 @@ Once you have attached a VPC and attached an allowed routes list, you can activa
 
 3. In the **Route propagation** section, use the toggle <Icon name="toggle" /> to turn route propagation **ON**.  
 
-    A pop-up displays, showing the attached allowed routes list which will define the incoming and outgoing route announcements to accept. You can change the attached allowed routes list if you wish. 
+    A pop-up displays, showing the attached allowed routes list which will define the incoming and outgoing route announcements to accept. You can change the attached allowed routes list if you wish.
     
     It is not possible to activate route propagation without attaching an allowed routes list, as all route announcements would be blocked, rendering the action ineffective.
 
@@ -175,7 +175,7 @@ You can delete your InterLink at any time. Action is required on both the Scalew
 
 5. Type **DELETE** in the box, and click **Delete InterLink**.
 
-        You are returned to the InterLink's **Overview** page, where it's status now shows as **Deprovisioning**. Scaleway stops billing you for your InterLink at this point, and it can no longer be configured, un-deleted, or used to route traffic.
+        You are returned to the InterLink's **Overview** page, where its status now shows as **Deprovisioning**. Scaleway stops billing you for your InterLink at this point, and it can no longer be configured, un-deleted, or used to route traffic.
 
 6. Contact your partner to request that they delete the InterLink resource on their side. They may continue to bill you until you do so, and they deprovision the resource on their side. To get in touch with the partner, you can use the same contact information that you used when [requesting the InterLink from the partner](/interlink/how-to/complete-provisioning/).
 
