codewide: rename Scylla -> ScyllaDB

wprzytula · wprzytula · commit b6c4fc80ad20 · 2025-07-16T10:15:48.000+02:00
This name change has been widely adopted in the company's products,
documentation, and marketing materials. However, the Rust Driver
retained much of the legacy naming, which is now updated.
diff --git a/.github/workflows/rust.yml b/.github/workflows/rust.yml
@@ -89,7 +89,7 @@ jobs:
     timeout-minutes: 60
     steps:
     - uses: actions/checkout@v3
-    - name: Setup 3-node Scylla cluster
+    - name: Setup 3-node ScyllaDB cluster
       run: |
         sudo sh -c "echo 2097152 >> /proc/sys/fs/aio-max-nr"
         docker compose -f test/cluster/docker-compose.yml up -d --wait
diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
@@ -38,7 +38,7 @@ To run a cargo test suite, use the command below (note that you must have Docker
 ```bash
 make test
 ```
-When on non-Linux machine, however, it can be impossible to connect to containerized Scylla instance from outside Docker.\
+When on non-Linux machine, however, it can be impossible to connect to containerized ScyllaDB instance from outside Docker.\
 If you are using macOS, we provide a `dockerized-test` make target for running tests inside another Docker container:
 ```bash
 make dockerized-test
@@ -110,7 +110,7 @@ There are a few scenarios:
          using command like `cargo update -p toml_datetime --precise 0.6.3` and go back to step 3.
       5. Rename `Cargo.lock` to `Cargo.lock.msrv`.
 
-### Semver checking 
+### Semver checking
 
 Our CI runs cargo semver-checks and labels PRs that introduce breaking changes.
 If you don't intend to change public API, you can perform the checks locally,
diff --git a/MAINTENANCE.md b/MAINTENANCE.md
@@ -130,7 +130,7 @@ For an example, see four last commits of this PR: https://github.com/scylladb/sc
 
 Commits that update `scylla-proxy` / `scylla-macros` / `scylla-cql` change:
 - `version` field in relevant `Cargo.toml`
-- Version number in crates that depend on given crate (so a commit bumping `scylla-macros` will also change version of 
+- Version number in crates that depend on given crate (so a commit bumping `scylla-macros` will also change version of
 `scylla-macros` in `scylla` and `scylla-cql` crates).
 - Version number of the crate in `Cargo.lock.msrv`
 
@@ -249,7 +249,7 @@ should contain links to relevant PR / PRs.
 
 ```
 The ScyllaDB team is pleased to announce ScyllaDB Rust Driver X.Y.Z,
-an asynchronous CQL driver for Rust, optimized for Scylla, but also compatible with Apache Cassandra!
+an asynchronous CQL driver for Rust, optimized for ScyllaDB, but also compatible with Apache Cassandra!
 
 Some interesting statistics:
 
@@ -300,4 +300,3 @@ Contributors since the last release:
 | 17      | Mercedes Marks    |
 
 ```
-
diff --git a/README.md b/README.md
@@ -9,7 +9,7 @@ This is a client-side driver for [ScyllaDB] written in pure Rust with a fully as
 Although optimized for ScyllaDB, the driver is also compatible with [Apache Cassandra®].
 
 ## Getting Started
-The [documentation book](https://rust-driver.docs.scylladb.com/stable/index.html) is a good place to get started. Another useful resource is the Rust and Scylla [lesson](https://university.scylladb.com/courses/using-scylla-drivers/lessons/rust-and-scylla-2/) on Scylla University.
+The [documentation book](https://rust-driver.docs.scylladb.com/stable/index.html) is a good place to get started. Another useful resource is the Rust and ScyllaDB [lesson](https://university.scylladb.com/courses/using-scylla-drivers/lessons/rust-and-scylla-2/) on Scylla University.
 
 ## Examples
 ```rust
@@ -27,7 +27,7 @@ while let Some((a, b, c)) = stream.try_next().await? {
 ```
 
 Please see the full [example](examples/basic.rs) program for more information.
-You can also run the example as follows if you have a Scylla server running:
+You can also run the example as follows if you have a ScyllaDB server running:
 
 ```sh
 SCYLLA_URI="127.0.0.1:9042" cargo run --example basic
diff --git a/docs/book.toml b/docs/book.toml
@@ -1,6 +1,6 @@
 [book]
-title = "Scylla Rust Driver"
-description = "Documentation for Scylla Rust Driver"
+title = "ScyllaDB Rust Driver"
+description = "Documentation for ScyllaDB Rust Driver"
 authors = []
 language = "en"
 multilingual = false
@@ -16,8 +16,8 @@ git-repository-url = "https://github.com/scylladb/scylla-rust-driver"
 [preprocessor.sphinx]
 command = '''bash -c '
 if test -f "./docs/sphinx_preprocessor.py"; then
-    python ./docs/sphinx_preprocessor.py "$@" 
-else 
+    python ./docs/sphinx_preprocessor.py "$@"
+else
     python ./sphinx_preprocessor.py "$@"
 fi' run_preprocessor
 '''
diff --git a/docs/source/SUMMARY.md b/docs/source/SUMMARY.md
@@ -1,10 +1,10 @@
 # Summary
 
-[Scylla Rust Driver](index.md)
+[ScyllaDB Rust Driver](index.md)
 
 - [Quick start](quickstart/quickstart.md)
     - [Creating a project](quickstart/create-project.md)
-    - [Running Scylla using Docker](quickstart/scylla-docker.md)
+    - [Running ScyllaDB using Docker](quickstart/scylla-docker.md)
     - [Connecting and executing a simple CQL statement](quickstart/example.md)
 
 - [Migration guides](migration-guides/migration-guides.md)
diff --git a/docs/source/conf.py b/docs/source/conf.py
@@ -49,9 +49,9 @@
 master_doc = 'contents'
 
 # General information about the project.
-project = 'Scylla Rust Driver'
+project = 'ScyllaDB Rust Driver'
 copyright = str(date.today().year) + ', ScyllaDB. All rights reserved.'
-author = u'Scylla Project Contributors'
+author = u'ScyllaDB Project Contributors'
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
@@ -116,7 +116,7 @@ def setup(sphinx):
     'github_repository': 'scylladb/scylla-rust-driver',
     'github_issues_repository': 'scylladb/scylla-rust-driver',
     'hide_banner': 'true',
-    'site_description': 'Scylla Driver for Rust.',
+    'site_description': 'ScyllaDB Driver for Rust.',
     'hide_edit_this_page_button': 'false',
     'hide_feedback_buttons': 'false',
     'versions_unstable': UNSTABLE_VERSIONS,
diff --git a/docs/source/connecting/connecting.md b/docs/source/connecting/connecting.md
@@ -1,6 +1,6 @@
 # Connecting to the cluster
 
-Scylla is a distributed database, which means that it operates on multiple nodes running independently.
+ScyllaDB is a distributed database, which means that it operates on multiple nodes running independently.
 When creating a `Session` you can specify a few known nodes to which the driver will try connecting:
 ```rust
 # extern crate scylla;
@@ -56,9 +56,9 @@ If you need to share `Session` with different threads / Tokio tasks etc. use `Ar
 The driver refreshes the cluster metadata periodically, which contains information about cluster topology as well as the cluster schema. By default, the driver refreshes the cluster metadata every 60 seconds.
 However, you can set the `cluster_metadata_refresh_interval` to a non-negative value to periodically refresh the cluster metadata. This is useful when you do not have unexpected amount of traffic or when you have an extra traffic causing topology to change frequently.
 
-## Scylla Cloud Serverless
+## ScyllaDB Cloud Serverless
 
-Scylla Serverless is an elastic and dynamic deployment model. When creating a `Session` you need to
+ScyllaDB Serverless is an elastic and dynamic deployment model. When creating a `Session` you need to
 specify the secure connection bundle as follows:
 
 ```rust
diff --git a/docs/source/data-types/udt.md b/docs/source/data-types/udt.md
@@ -1,5 +1,5 @@
 # User defined types
-Scylla allows users to define their own data types with named fields (See [the official documentation](https://opensource.docs.scylladb.com/stable/cql/types.html#user-defined-types))\
+ScyllaDB allows users to define their own data types with named fields (See [the official documentation](https://opensource.docs.scylladb.com/stable/cql/types.html#user-defined-types))\
 To use user defined types in the driver, you can create a corresponding struct in Rust, and use it to read and write UDT values.
 
 
@@ -75,4 +75,4 @@ while let Some((my_type_value,)) = iter.try_next().await? {
 }
 # Ok(())
 # }
-```
+```
diff --git a/docs/source/index.md b/docs/source/index.md
@@ -1,13 +1,13 @@
-# Scylla Rust Driver
+# ScyllaDB Rust Driver
 This book contains documentation for [scylla-rust-driver](https://github.com/scylladb/scylla-rust-driver) - a driver
-for the [Scylla](https://scylladb.com) database written in Rust.
+for [ScyllaDB](https://scylladb.com) written in Rust.
 Although optimized for Scylla, the driver is also compatible with [Apache Cassandra®](https://cassandra.apache.org/).
 
 ### Other documentation
 * [Examples](https://github.com/scylladb/scylla-rust-driver/tree/main/examples)
-* [Rust and Scylla lesson](https://university.scylladb.com/courses/using-scylla-drivers/lessons/rust-and-scylla-2/) on Scylla University
+* [Rust and ScyllaDB lesson](https://university.scylladb.com/courses/using-scylla-drivers/lessons/rust-and-scylla-2/) on Scylla University
 * [API documentation](https://docs.rs/scylla)
-* [Scylla documentation](https://docs.scylladb.com)
+* [ScyllaDB documentation](https://docs.scylladb.com)
 * [Cassandra® documentation](https://cassandra.apache.org/doc/latest/)
 
 
diff --git a/docs/source/load-balancing/default-policy.md b/docs/source/load-balancing/default-policy.md
@@ -1,6 +1,6 @@
 # DefaultPolicy
 
-`DefaultPolicy` is the default load balancing policy in Scylla Rust Driver. It
+`DefaultPolicy` is the default load balancing policy in ScyllaDB Rust Driver. It
 can be configured to be datacenter-aware and token-aware. Datacenter failover
 for queries with non-local consistency mode is also supported.
 
diff --git a/docs/source/quickstart/quickstart.md b/docs/source/quickstart/quickstart.md
@@ -8,7 +8,7 @@ Topics Include:
 
 * [Create a Rust Project](create-project.md)
 * [Example](example.md)
-* [Install Scylla with Docker](scylla-docker.md)
+* [Install ScyllaDB with Docker](scylla-docker.md)
 
 
 ```{eval-rst}
@@ -20,4 +20,4 @@ Topics Include:
    example
    scylla*
 
-```
+```
diff --git a/docs/source/quickstart/scylla-docker.md b/docs/source/quickstart/scylla-docker.md
@@ -1,10 +1,10 @@
-# Running Scylla using Docker
+# Running ScyllaDB using Docker
 
-To make queries we will need a running Scylla instance. The easiest way is to use a [Docker](https://www.docker.com/) image.\
+To make queries we will need a running ScyllaDB instance. The easiest way is to use a [Docker](https://www.docker.com/) image.\
 Please [install Docker](https://docs.docker.com/engine/install) if it's not installed.
 
 ### Running scylla
-To start Scylla run:
+To start ScyllaDB run:
 ```bash
 # on Linux sudo might be required
 docker run --rm -it -p 9042:9042 scylladb/scylla --smp 2
@@ -14,10 +14,9 @@ Docker will download the image, then after minute or two there should be a messa
 ```shell
 Starting listening for CQL clients on 172.17.0.2:9042
 ```
-This means that Scylla is ready to receive queries
+This means that ScyllaDB is ready to receive queries
 
 To stop this instance press `Ctrl + C`
 
 ### More information
 More information about this image can be found on [dockerhub](https://hub.docker.com/r/scylladb/scylla)
-
diff --git a/docs/source/retry-policy/downgrading-consistency.md b/docs/source/retry-policy/downgrading-consistency.md
@@ -25,12 +25,12 @@ The lower consistency level to use for retries is determined by the following ru
   - if 1, 2 or 3 replicas responded, use the corresponding level `Consistency::One`, `Consistency::Two` or
       `Consistency::Three`.
 
-Note that if the initial consistency level was `Consistency::EachQuorum`, Scylla returns the number
+Note that if the initial consistency level was `Consistency::EachQuorum`, ScyllaDB returns the number
 of live replicas _in the datacenter that failed to reach consistency_, not the overall
 number in the cluster. Therefore if this number is 0, we still retry at `Consistency::One`, on the
 assumption that a host may still be up in another datacenter.
 The reasoning being this retry policy is the following one. If, based on the information the
-Scylla coordinator node returns, retrying the operation with the initially requested
+ScyllaDB coordinator node returns, retrying the operation with the initially requested
 consistency has a chance to succeed, do it. Otherwise, if based on this information we know
 **the initially requested consistency level cannot be achieved currently**, then:
   - For writes, ignore the exception (thus silently failing the consistency requirement) if we
diff --git a/docs/source/statements/lwt.md b/docs/source/statements/lwt.md
@@ -4,7 +4,7 @@ A lightweight transaction statement can be expressed just like any other stateme
 
 
 ### Format of the statement
-A lightweight transaction statement is not a separate type - it can be expressed just like any other statements: via `Statement`, `PreparedStatement`, batches, and so on. The difference lays in the statement string itself - when it contains a condition (e.g. `IF NOT EXISTS`), it becomes a lightweight transaction. It's important to remember that CQL specification requires a separate, additional consistency level to be defined for LWT statements - `serial_consistency_level`. The serial consistency level can only be set to two values: `SerialConsistency::Serial` or `SerialConsistency::LocalSerial`. The "local" variant makes the transaction consistent only within the same datacenter. For convenience, Scylla Rust Driver sets the default consistency level to `LocalSerial`, as it's more commonly used. For cross-datacenter consistency, please remember to always override the default with `SerialConsistency::Serial`.
+A lightweight transaction statement is not a separate type - it can be expressed just like any other statements: via `Statement`, `PreparedStatement`, batches, and so on. The difference lays in the statement string itself - when it contains a condition (e.g. `IF NOT EXISTS`), it becomes a lightweight transaction. It's important to remember that CQL specification requires a separate, additional consistency level to be defined for LWT statements - `serial_consistency_level`. The serial consistency level can only be set to two values: `SerialConsistency::Serial` or `SerialConsistency::LocalSerial`. The "local" variant makes the transaction consistent only within the same datacenter. For convenience, ScyllaDB Rust Driver sets the default consistency level to `LocalSerial`, as it's more commonly used. For cross-datacenter consistency, please remember to always override the default with `SerialConsistency::Serial`.
 ```rust
 # extern crate scylla;
 # use scylla::client::session::Session;
@@ -29,4 +29,3 @@ session.query_unpaged(my_statement, (to_insert,)).await?;
 The rest of the API remains identical for LWT and non-LWT statements.
 
 See [Statement API documentation](https://docs.rs/scylla/latest/scylla/statement/struct.Statement.html) for more options
-
diff --git a/docs/source/tracing/tracing.md b/docs/source/tracing/tracing.md
@@ -6,7 +6,7 @@ There are two separate ways to get information about what happened with a query:
 ### Tracing
 
 Tracing is a feature provided by Scylla. When sending a query we can set a flag that signifies that we would like it to be traced.
-After completing the query Scylla provides a `tracing_id` which can be used to fetch information about it - which nodes it was sent to, what operations were performed etc.
+After completing the query ScyllaDB provides a `tracing_id` which can be used to fetch information about it - which nodes it was sent to, what operations were performed etc.
 
 Queries that support tracing:
 * [`Session::query_unpaged()`](basic.md)
@@ -17,7 +17,7 @@ Queries that support tracing:
 * [`Session::prepare()`](prepare.md)
 
 After obtaining the tracing id you can use `Session::get_tracing_info()` to query tracing information.\
-`TracingInfo` contains values that are the same in Scylla and Cassandra®, skipping any database-specific ones.\
+`TracingInfo` contains values that are the same in ScyllaDB and Cassandra®, skipping any database-specific ones.\
 If `TracingInfo` does not contain some needed value it's possible to query it manually from the tables
 `system_traces.sessions` and `system_traces.events`
 
@@ -38,4 +38,4 @@ More information is available in the [Query Execution History](query-history.md)
    paged
    prepare
    query-history
-```
+```
diff --git a/scylla/src/client/self_identity.rs b/scylla/src/client/self_identity.rs
@@ -22,7 +22,7 @@ pub struct SelfIdentity<'id> {
     //   application variables are not.
     //
     // ### A:
-    // The following options are not exposed anywhere in Scylla tables.
+    // The following options are not exposed anywhere in ScyllaDB tables.
     // They come directly from CPP driver, and they are supported in Cassandra
     //
     // See https://github.com/scylladb/cpp-driver/blob/fa0f27069a625057984d1fa58f434ea99b86c83f/include/cassandra.h#L2916.
diff --git a/scylla/src/client/session.rs b/scylla/src/client/session.rs
@@ -189,7 +189,7 @@ pub struct SessionConfig {
     pub connect_timeout: Duration,
 
     /// Size of the per-node connection pool, i.e. how many connections the driver should keep to each node.
-    /// The default is `PerShard(1)`, which is the recommended setting for Scylla clusters.
+    /// The default is `PerShard(1)`, which is the recommended setting for ScyllaDB clusters.
     pub connection_pool_size: PoolSize,
 
     /// If true, prevents the driver from connecting to the shard-aware port, even if the node supports it.
diff --git a/scylla/src/client/session_builder.rs b/scylla/src/client/session_builder.rs
@@ -662,7 +662,7 @@ impl<K: SessionBuilderKind> GenericSessionBuilder<K> {
     /// use scylla::client::PoolSize;
     ///
     /// // This session will establish 4 connections to each node.
-    /// // For Scylla clusters, this number will be divided across shards
+    /// // For ScyllaDB clusters, this number will be divided across shards
     /// let session: Session = SessionBuilder::new()
     ///     .known_node("127.0.0.1:9042")
     ///     .pool_size(PoolSize::PerHost(NonZeroUsize::new(4).unwrap()))
@@ -688,7 +688,7 @@ impl<K: SessionBuilderKind> GenericSessionBuilder<K> {
     ///
     /// In order to be able to use the shard-aware port effectively, the port needs to be
     /// reachable and not behind a NAT which changes source ports (the driver uses the source port
-    /// to tell Scylla which shard to assign). However, the driver is designed to behave in a robust
+    /// to tell ScyllaDB which shard to assign). However, the driver is designed to behave in a robust
     /// way if those conditions are not met - if the driver fails to connect to the port or gets
     /// a connection to the wrong shard, it will re-attempt the connection to the regular transport port.
     ///
diff --git a/scylla/src/cloud/config.rs b/scylla/src/cloud/config.rs
@@ -418,10 +418,10 @@ mod deserialize {
         // +optional
         clientKeyPath: Option<String>,
 
-        // Username is the username for basic authentication to the Scylla cluster.
+        // Username is the username for basic authentication to the ScyllaDB cluster.
         // +optional
         username: Option<String>,
-        // Password is the password for basic authentication to the Scylla cluster.
+        // Password is the password for basic authentication to the ScyllaDB cluster.
         // +optional
         password: Option<String>,
     }
@@ -437,7 +437,7 @@ mod deserialize {
         // +optional
         certificateAuthorityData: Option<String>,
 
-        // Server is the initial contact point of the Scylla cluster.
+        // Server is the initial contact point of the ScyllaDB cluster.
         // Example: https://hostname:port
         server: String,
 
diff --git a/scylla/src/cluster/node.rs b/scylla/src/cluster/node.rs
@@ -26,7 +26,7 @@ use std::{
 use crate::cluster::metadata::{PeerEndpoint, UntranslatedEndpoint};
 
 /// This enum is introduced to support address translation only upon opening a connection,
-/// as well as to cope with a bug present in older Cassandra and Scylla releases.
+/// as well as to cope with a bug present in older Cassandra and ScyllaDB releases.
 /// The bug involves misconfiguration of rpc_address and/or broadcast_rpc_address
 /// in system.local to 0.0.0.0. Mitigation involves replacing the faulty address
 /// with connection's address, but then that address must not be subject to `AddressTranslator`,
diff --git a/scylla/src/network/connection_pool.rs b/scylla/src/network/connection_pool.rs
diff --git a/scylla/src/network/mod.rs b/scylla/src/network/mod.rs
diff --git a/scylla/src/routing/locator/tablets.rs b/scylla/src/routing/locator/tablets.rs
diff --git a/scylla/src/routing/locator/token_ring.rs b/scylla/src/routing/locator/token_ring.rs
diff --git a/scylla/src/routing/mod.rs b/scylla/src/routing/mod.rs
diff --git a/scylla/src/routing/partitioner.rs b/scylla/src/routing/partitioner.rs
diff --git a/scylla/src/routing/sharding.rs b/scylla/src/routing/sharding.rs
diff --git a/scylla/src/utils/test_utils.rs b/scylla/src/utils/test_utils.rs
diff --git a/scylla/tests/integration/ccm/lib/cluster.rs b/scylla/tests/integration/ccm/lib/cluster.rs
