diff --git a/README.md b/README.md
index 3e99012..659e737 100644
--- a/README.md
+++ b/README.md
@@ -15,7 +15,6 @@ These ADS-B data can be received by ~~nerds~~ enthusiasts using Software Defined
* [Planespotters.net](https://www.planespotters.net/)
* [Plane Watch](https://plane.watch/)
* [The Air Traffic](https://theairtraffic.com/)
-* [RadarPlane.com](https://radarplane.com/)
* [HPRadar](https://skylink.hpradar.com)
* [Fly Italy ADSB](https://flyitalyadsb.com/)
diff --git a/feeder-containers/feeding-radarplane.md b/feeder-containers/feeding-radarplane.md
deleted file mode 100644
index f9cdac9..0000000
--- a/feeder-containers/feeding-radarplane.md
+++ /dev/null
@@ -1,141 +0,0 @@
----
-description: 'If you wish to feed RadarPlane.com, follow the steps below.'
----
-
-# RadarPlane/docker-radarplane
-
-Docker container to feed ADS-B data into [RadarPlane](https://radarplane.com). Designed to work in tandem
-with [sdr-enthusiasts/docker-readsb-protobuf][docker-readsb-protobuf] or another BEAST provider. Builds and runs on x86,
-x86_64, arm32v7 & arm64v8.
-
-The container pulls ADS-B information from a BEAST provider and sends data to [RadarPlane](https://radarplane.com).
-
-For more information on [RadarPlane](https://radarplane.com), see
-here: [RadarPlane Feeding Instructions](https://radarplane.com/feed). This container uses a modified version of the "
-script method" outlined on that page.
-
-## Configuring `RadarPlane/docker-radarplane` Container
-
-* If you're using this container with the [sdr-enthusiasts/docker-readsb-protobuf][docker-readsb-protobuf] container to
- provide ModeS/BEAST data, and the containers are on different docker networks or on different hosts:
- * You'll need to ensure you've opened port `30005` (or whatever port is serving BEAST data) into
- the [sdr-enthusiasts/docker-readsb-protobuf][docker-readsb-protobuf] container.
- * The IP address or hostname of the docker host running
- the [sdr-enthusiasts/docker-readsb-protobuf][docker-readsb-protobuf] container should be passed to
- the `RadarPlane/docker-radarplane` container via the `BEASTHOST` environment variable shown below. The port can be
- changed from the default of `30005` with the optional `BEASTPORT` environment variable if required.
-* The latitude and longitude of your antenna must be passed via the `LAT` and `LONG` environment variables respectively.
-* The altitude of your antenna must be passed via the `ALT` environment variable respectively. Defaults to metres, but
- units may specified with a 'ft' or 'm' suffix.
-* A UUID for this feeder must be passed via the `UUID` environment variable (see below).
-* Lastly, you should specify a site name via the `SITENAME` environment variable. This field supports letters,
- numbers, `-` & `_` only. Any other characters will be stripped upon container initialization.
-
-## Generating a site UUID Number
-
-First-time users should generate a static UUID using this command:
-
-```shell
-cat /proc/sys/kernel/random/uuid
-```
-
-Inside your application directory \(`/opt/adsb`\), edit the `.env` file using your favourite text editor. Beginners may find the editor `nano` easy to use:
-
-```shell
-nano /opt/adsb/.env
-```
-
-This file holds all of the commonly used variables \(such as our latitude, longitude and altitude\). We're going to add our OpenSky username to this file. Add the following line to the file:
-
-```shell
-RADARPLANE_UUID='YOURUUID'
-```
-
-* Replace `RADARPLANE_UUID` with the station UUID you generated earlier.
-
-For example:
-
-```shell
-RADARPLANE_UUID=00000000-0000-0000-0000-000000000000
-```
-
-## Up-and-Running with `docker run`
-
-```shell
-source ./.env
-docker run \
- -d \
- --rm \
- --name radarplane \
- -e TZ=${FEEDER_TZ} \
- -e BEASTHOST=readsb \
- -e LAT=${FEEDER_LAT} \
- -e LONG=${FEEDER_LONG} \
- -e ALT=50m \
- -e SITENAME=${FEEDER_NAME} \
- -e UUID=${RADARPLANE_UUID} \
- --tmpfs=/run:rw,nosuid,nodev,exec,relatime,size=64M,uid=1000,gid=1000 \
- ghcr.io/RadarPlane/docker-radarplane:main
-```
-
-## Up-and-Running with Docker Compose
-
-First timers are encouraged to
-read [ADS-B Reception, Decoding & Sharing with Docker](https://mikenye.gitbook.io/ads-b/).
-
-An example docker compose service definition is below:
-
-```yaml
- radarplane:
- image: ghcr.io/radarplane/docker-radarplane:main
- container_name: radarplane
- restart: unless-stopped
- environment:
- - BEASTHOST=readsb
- - TZ=${FEEDER_TZ}
- - LAT=${FEEDER_LAT}
- - LONG=${FEEDER_LONG}
- - ALT=50m
- - SITENAME=${FEEDER_NAME}
- - UUID=${RADARPLANE_UUID}
- tmpfs:
- - /run:rw,nosuid,nodev,exec,relatime,size=64M,uid=1000,gid=1000
-```
-
-## Runtime Environment Variables
-
-There are a series of available environment variables:
-
-| Environment Variable | Purpose | Default |
-|----------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|-------------------------|
-| `BEASTHOST` | Required. IP/Hostname of a Mode-S/BEAST provider (dump1090) | |
-| `BEASTPORT` | Optional. TCP port number of Mode-S/BEAST provider (dump1090) | `30005` |
-| `UUID` | Required. Your static UUID | |
-| `LAT` | Required. The latitude of the antenna | |
-| `LONG` | Required. The longitude of the antenna | |
-| `ALT` | Required. The altitude of the antenna above sea level. If positive (above sea level), must include either 'm' or 'ft' suffix to indicate metres or feet. If negative (below sea level), must have no suffix, and the value is interpreted in metres. | |
-| `SITENAME` | Required. The name of your site (A-Z, a-z, `-`, `_`) | |
-| `TZ` | Optional. Your local timezone | `GMT` |
-| `REDUCE_INTERVAL` | Optional. How often beastreduce data is transmitted to ADSBExchange. For low bandwidth feeds, this can be increased to `5` or even `10` | `0.5` |
-| `PRIVATE_MLAT` | Optional. Setting this to true will prevent feeder being shown on the feeder maps | `false` |
-| `MLAT_INPUT_TYPE` | Optional. Sets the input receiver type. Run `docker run --rm -it --entrypoint mlat-client ghcr.io/RadarPlane/docker-radarplane:latest --help` and see `--input-type` for valid values. | `dump1090` |
-| `STATS_DISABLE` | Optional. Set to any value to disable stats module / anywhere map (if you don't like lots of DNS lookups, set this to 1) | unset |
-| `ADSB_FEED_DESTINATION_HOSTNAME` | Optional. Allows changing the hostname that ADS-B data is fed to. | `feed.radarplane.com` |
-| `ADSB_FEED_DESTINATION_PORT` | Optional. Allows changing the TCP port that ADS-B data is fed to. | `30001` |
-| `ADSB_FEED_DESTINATION_TYPE` | Optional. Allows changing the `readsb` output data type. | `beast_reduce_plus_out` |
-| `MLAT_FEED_DESTINATION_HOSTNAME` | Optional. Allows changing the MLAT server hostname. | `feed.radarplane.com` |
-| `MLAT_FEED_DESTINATION_PORT` | Optional. Allows changing the MLAT server TCP port. | `31090` |
-
-## Ports
-
-| Port | Purpose |
-|---------|---------------------------------------------------------------------------------------------------------------------------------------------|
-| `30105` | MLAT data in Beast format for tools such as [`graphs1090`](https://github.com/mikenye/docker-graphs1090) and/or [`tar1090`][docker-tar1090]
-
-## Logging
-
-* All processes are logged to the container's stdout, and can be viewed with `docker logs [-f] container`.
-
-[docker-readsb-protobuf]: https://github.com/sdr-enthusiasts/docker-readsb-protobuf
-
-[docker-tar1090]: https://github.com/sdr-enthusiasts/docker-tar1090
diff --git a/foundations/deploy-ultrafeeder-container.md b/foundations/deploy-ultrafeeder-container.md
index a039fa4..601cea5 100644
--- a/foundations/deploy-ultrafeeder-container.md
+++ b/foundations/deploy-ultrafeeder-container.md
@@ -150,7 +150,6 @@ There are several aggregators, both non-profit and commercial, that can directly
| The Air Traffic | N | Run by an aviation enthusiast | adsb:`feed.theairtraffic.com` port `30004`
mlat: `mlat.theairtraffic.com` port `31090` |
| AVDelphi | N | Aviation data-science company (non-profit) | adsb:`data.avdelphi.com` port `24999`
mlat: no MLAT |
| ADSB Exchange | C | Large aggregator owned by JetNet | adsb:`feed1.adsbexchange.com` port `30004`
mlat: `feed.adsbexchange.com` port `31090` |
-| RadarPlane | N | Run by a few aviation enthusiasts in Canada and Portugal | adsb: `feed.radarplane.com` port `30001`
mlat: `feed.radarplane.com` port `31090` |
| Fly Italy ADSB | N | Run by a few aviation enthusiasts in Italy | adsb: `dati.flyitalyadsb.com` port `4905`
mlat: `dati.flyitalyadsb.com` port `30100` |
When feeding AdsbExchange, Ultrafeeder will send statistics to adsbexchange.com by default. See the description of the `ADSBX_STATS` parameter on how to disable this.