possible to add project to Arduino IDE?

[giovanne123]

Hi,
is it possible to add the "esp8266_tpm2net" (sources) and also "esp8266_tpm2net_ws2801" to the Arduino IDE project (https://github.com/esp8266/Arduino)?
So that I can compile the sources/project there?

Thanks for informations how to! I'm starting I don't have the knowledge at the moment :-(

Thanks
giovanne

[sfranzyshen]

Hi giovanne!
I have only now myself started to experiment with the port of Arduino IDE for the esp8266 (or the port of the esp8266 to the Arduino IDE ... However) and I have planned to make librarie(s) for the "port" that would provide tpm2net & tpm2ser support ... I have bowed out of the Ws28xx ... digital led game for the fact that there are already many people already doing it (now) and doing a great job. So with that in mind ... this code here will remain as is ... with small changes here and there ... but I will start a new project for the tpm2 stuff ... soon ... but not to soon ... I'll try an announce it here for you when that happens ... Thanks!

[giovanne123]

Hi sfranzyshen,
Ok thanks.
So for now, when I plan to use the "esp8266_tpm2net_ws2801" first until there is something new.
As I understand actually it will be shown as an AP with IP 192.168.4.1.
Can I get it running, if my Pi is only connected to my network via router and in subnet 192.168.0.* ? No Wifi on the Pi at the moment.
If I activate two ESP with the IP 192.168.4.1, should that work or does this ends in conflicts in network?

My plan, using Pi with hyperion and tpm2net is sending the data to two ESPs. But how to handle with the APs?

Thanks,
giovanne

[giovanne123]

Maybe you can compile me two firmwares with configured IPs 192.168.0.2 and 192.168.0.3 and give me the bins.
Then they are fitting to my network... and I can see...