Welcome to IRCTC CYPRESS AUTOMATION Discussions!

[shivamguys]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[apurvjha123]

bro the problem is not filling, the problem it take lot of time to proceed to next page, will your project fetech faster ? or do you have any idea ?

[shivamguys]

We cannot by pass server behaviour thats how IRCTC is...
This was designed to keep this in mind that IRCTC is like that only what we can do is automate the whole process and if server throws us out we can start again in seconds and still book the tickets.
Did you had a look at the Video which is linked in readme of this project?
If server behaves properly then its hardly 35sec to book 6 passengers tickets at one shot
But if not we can restart the script without worrying further

[apurvjha123]

Nice to hear from you, I think there is way to put lot of traffic in a website and access which one comes faster, this is how lot of illigal software works , did you heard about that ??

…

On Thu, 26 Oct 2023, 07:38 Shivam Pandey :-), ***@***.***> wrote: We cannot by pass server behaviour thats how IRCTC is... This was designed to keep this in mind that IRCTC is like that only what we can do is automate the whole process and if server throws us out we can start again in seconds and still book the tickets. Did you had a look at the Video which is linked in readme of this project? If server behaves properly then its hardly 35sec to book 6 passengers tickets at one shot But if not we can restart the script without worrying further — Reply to this email directly, view it on GitHub <#1 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AX5GUE4F7LDW67WEHHI66CLYBHA2LAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TGOBXGI3TO> . You are receiving this because you commented.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7387277@ github.com>

[shivamguys]

I dont think IRCTC would maintain that many sessions for 1 account. On Thu, 26 Oct, 2023, 9:45 am Apurv Krishn Jha, ***@***.***> wrote:

…

Nice to hear from you, I think there is way to put lot of traffic in a website and access which one comes faster, this is how lot of illigal software works , did you heard about that ?? On Thu, 26 Oct 2023, 07:38 Shivam Pandey :-), ***@***.***> wrote: > We cannot by pass server behaviour thats how IRCTC is... > This was designed to keep this in mind that IRCTC is like that only what > we can do is automate the whole process and if server throws us out we can > start again in seconds and still book the tickets. > Did you had a look at the Video which is linked in readme of this project? > If server behaves properly then its hardly 35sec to book 6 passengers > tickets at one shot > But if not we can restart the script without worrying further > > — > Reply to this email directly, view it on GitHub > < #1 (reply in thread)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AX5GUE4F7LDW67WEHHI66CLYBHA2LAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TGOBXGI3TO> > . > You are receiving this because you commented.Message ID: > <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7387277@ > github.com> > — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGAX65LIKIBXMM4GGIDOXYTYBHPVVAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TGOBXHE4DA> . You are receiving this because you authored the thread.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7387980@ github.com>

[apurvjha123]

alright, thanks.

can you help me with GOOGLE_APPLICATION_CREDENTIALS its not working putting this value in captcha input 403 Cloud Vision API has not been used in project 902339083841 before or it is disabled. Enable it by visiting https://console.developers.google.com

[shivamguys]

did it got through???

[shivamguys]

bro just go to billing dashboard of your cloud and enable that for cloud
vision apis

[shivamguys]

bro just go to billing dashboard of your cloud and enable that for cloud vision apis

…

On Thu, Oct 26, 2023 at 10:40 AM Apurv Krishn Jha ***@***.***> wrote: alright, thanks. can you help me with GOOGLE_APPLICATION_CREDENTIALS its not working putting this value in captcha input 403 Cloud Vision API has not been used in project 902339083841 before or it is disabled. Enable it by visiting https://console.developers.google.com — Reply to this email directly, view it on GitHub <#1 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGAX65L2R3CFBBNW7QYIML3YBHWFBAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TGOBYGMYTA> . You are receiving this because you authored the thread.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7388310@ github.com>

-- *Thanks* *Shivam Pandey*

[apurvjha123]

Yaa , but the reload thing getting my nerves 😞, it take time equivalent to a normal user , there is no advantage

…

On Mon, 30 Oct 2023, 11:59 Shivam Pandey :-), ***@***.***> wrote: did it got through??? — Reply to this email directly, view it on GitHub <#1 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AX5GUE77HM54RQADJDAMME3YB5CMXAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TIMRQGIYDE> . You are receiving this because you commented.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7420202@ github.com>

[shivamguys]

didn't got that reload thing??? On Mon, Oct 30, 2023 at 1:20 PM Apurv Krishn Jha ***@***.***> wrote:

…

Yaa , but the reload thing getting my nerves 😞, it take time equivalent to a normal user , there is no advantage On Mon, 30 Oct 2023, 11:59 Shivam Pandey :-), ***@***.***> wrote: > did it got through??? > > — > Reply to this email directly, view it on GitHub > < #1 (reply in thread)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AX5GUE77HM54RQADJDAMME3YB5CMXAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TIMRQGIYDE> > . > You are receiving this because you commented.Message ID: > <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7420202@ > github.com> > — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGAX65NPZMZUDWO6MWFHG63YB5L3VAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TIMRQG43DG> . You are receiving this because you authored the thread.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7420763@ github.com>

-- *Thanks* *Shivam Pandey*

[shivamguys]

I tried one SL booking today you know the rush in SL booking I got it through the payments in SL also.
3A is a charm for this....
I can go through 7 transaction for 3AC in the same 5-6 min time frame where a normal user can just hardly go through 1 transaction in 5-6 min

This was tested for heavy trains rush MUMBAI to DELHI having less 3AC tickets in them....

@apurvjha123

[sevilpatel]

Hello @shivamguys and @drtechie I am not much familiar with coding and stuff. Can you provide instructions how to use and run this whole thing in most basic way possible? It would be much helpful.

[shivamguys]

thanks for checking this out @sevilpatel ohkkk In that case I guess you need to have a Linux operating system only then i can guide you with some detailed video instructions.

[sevilpatel]

Can I not run this on windows?Sent from my Galaxy -------- Original message --------From: "Shivam Pandey :-)" ***@***.***> Date: 10/11/2023 1:05 pm (GMT+05:30) To: shivamguys/irctc-cypress-automation ***@***.***> Cc: sevilpatel ***@***.***>, Mention ***@***.***> Subject: Re: [shivamguys/irctc-cypress-automation] Welcome to IRCTC CYPRESS AUTOMATION Discussions! (Discussion #1) thanks for checking this out @sevilpatel ohkkk In that case I guess you need to have a Linux operating system only then i can guide you with some detailed video instructions. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[shivamguys]

you need more configurations to run all python scripts and cypress installation and i have never done that on windows to be frank, I stopped using windows from past 10 years and i am not aware of that what and how things needs to be configured in that, In that case you can have virtualbox to run linux just try searching for virtualbox and see how to install linux into that...

[sevilpatel]

Okay so I'll try that step first Sent from my Galaxy -------- Original message --------From: "Shivam Pandey :-)" ***@***.***> Date: 10/11/2023 1:13 pm (GMT+05:30) To: shivamguys/irctc-cypress-automation ***@***.***> Cc: sevilpatel ***@***.***>, Mention ***@***.***> Subject: Re: [shivamguys/irctc-cypress-automation] Welcome to IRCTC CYPRESS AUTOMATION Discussions! (Discussion #1) you need more configurations to run all python scripts and cypress installation and i have never done that on windows to be frank, I stopped using windows from past 10 years and i am not aware of that what and how things needs to be configured in that, In that case you can have virtualbox to run linux just try searching for virtualbox and see how to install linux into that... —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[sevilpatel]

Hey, so I installed VirtualBox and Ubuntu inside VirtualBox. So we can work with this?

…

On Fri, 10 Nov 2023, 1:13 pm Shivam Pandey :-), ***@***.***> wrote: you need more configurations to run all python scripts and cypress installation and i have never done that on windows to be frank, I stopped using windows from past 10 years and i am not aware of that what and how things needs to be configured in that, In that case you can have virtualbox to run linux just try searching for virtualbox and see how to install linux into that... — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BD3USTKDLL3SMYBBS72MLSTYDXLKPAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKMZQGY2DG> . You are receiving this because you were mentioned.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7530643@ github.com>

[ayushraj7520]

@shivamguys first of all thanks for this wonderful tool. I did managed to get it running. I wanted to ask you exactly at what time you run the script. at 10AM or 30 or 40 sec before. because as it starts running once it cant be paused. i think we have to run it at perfect time so at exactly 10 or 11AM it reaches the book now button. you did have booked sleeper tatkal earlier. just clear out this for me.

[shivamguys]

It will book tickets even if you login 1 minute before, and you can see the discussion board for confirmed tickets booking screenshots and yes i booked 3Ac tickets twice with this Thanks man for appreciating means a lot thanks again... I will advice you just start the script 50sec before....

…

On Sun, 19 Nov, 2023, 10:46 pm DeamonDan, ***@***.***> wrote: @shivamguys <https://github.com/shivamguys> first of all thanks for this wonderful tool. I did managed to get it running. I wanted to ask you exactly at what time you run the script. at 10AM or 30 or 40 sec before. because as it starts running once it cant be paused. i think we have to run it at perfect time so at exactly 10 or 11AM it reaches the book now button. you did have booked sleeper tatkal earlier. just clear out this for me. — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGAX65IX2D6YDFIYBEGGEDDYFI5ITAVCNFSM6AAAAAA4UPV3ECVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TMMJSGI2TM> . You are receiving this because you were mentioned.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/7612256@ github.com>

[ayushraj7520]

you are awesome. Tomorrow I am going to book. I just wanted to make this clear only at what time we should attempt running the script. i know it repeatedly clicks on the book now button until booking starts. but didnt that action will kick us out??

[shivamguys]

*pip install python-bidi*

…

On Tue, Jul 23, 2024 at 9:15 PM priyanshu209006 ***@***.***> wrote: import easyocr File "/opt/hostedtoolcache/Python/3.11.9/x64/lib/python3.11/site-packages/easyocr/ *init*.py", line 1, in from .easyocr import Reader File "/opt/hostedtoolcache/Python/3.11.9/x64/lib/python3.11/site-packages/easyocr/easyocr.py", line 9, in from bidi.algorithm import get_display ModuleNotFoundError: No module named 'bidi.algorithm' Error: Process completed with exit code 1. what to do — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGAX65P2TRF5NDICF3RLZCDZNZ3DLAVCNFSM6AAAAABLKWWPPWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMJSHA2DEMQ> . You are receiving this because you were mentioned.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/10128422@ github.com>

-- *Thanks* *Shivam Pandey*

[rajkmm]

Edit :- I got that installing lower veriosn of bidi
pip install python-bidi==0.4.2
Thanks.

Bro it's alread installed

└─$ python app.py ""
Traceback (most recent call last):
File "/home/raj/irctc-cypress-automation/irctc-captcha-solver/app.py", line 6, in
import easyocr
File "/home/raj/.local/lib/python3.11/site-packages/easyocr/init.py", line 1, in
from .easyocr import Reader
File "/home/raj/.local/lib/python3.11/site-packages/easyocr/easyocr.py", line 9, in
from bidi.algorithm import get_display
ModuleNotFoundError: No module named 'bidi.algorithm'

Do I have do install any specific python version?

Also check below differ requirement file
https://www.diffchecker.com/cFQBmOdi/

[rajkmm]

Bro I am getting below error on m vm
What should I do?

CypressError: cy.exec('python3 irctc-captcha-solver/app.py "data:image/jpg;base64,iVBORw0KGgoAAAANSUhEUgAAAMsAAAAyCAYAAADyZi/iAAAFc0lEQVR42u2dX2RkVxzHx4iIFUOsEXnoy6p9qDwsUbVixL6sFVERau1D9WFZeaiq6MuKWlFlVVWsCn1aeYi8rLWiVli1KtYqsapqrbAiovahRKwYYwzT3+F7u7e/npk599w/M3fu98tPmDn3N/ecez73nPM7v3tTKlEURVEURVEURVEURVEURVEU1U+1lRL2XRVbFPtabFvsV7ETsYZYE3//EnsgtiI2xSuSo4ueZucZxLqkDEtUtcR+EBtL0L8B8kzsWGxHbFNsWewSYSEseYYl0L7Y+RT9BzKj2rdi7xEWwjIosLwR+0lsyXRMsTK+HxWbF9uydOQnGcASqAloRgkLYekXLGaNshDA0aPsx5ZOPJ9EO5nfNyMVwPxCbBdTPq3fC7FuIiyDB4vH+X6vTmc7rXbCCLduAea1yxSQsBCWfsMyrU7nNO12ksOuIEIX1iPCkoIfKTKHOfexCodu95pGDDosmLaYepyibnWxF5jfT6VwDct6LZFRO81apmXzhCUhP9hDeOyweHwqNhnRd19hwfx+t0e93pr1SMrXsZ7VLAA3gLCeE5ZkOpgB5SBCtOU1OuDAwyIaR+jWNYr0UYLX8H3l/7cMYamgPmFdJCzxO9hTy2baXbEPMJUoY/79XWh4f5gTWIIw7jE276ood07sltjfqvwfCV7DNeV7Ncv1JaacYX1OWGL4QYcJy+wOX+7i7zLKtHMCi9GfASSW8jOW+X0tgetXw3qvHYK1kjEsn+obB2GJB8uhKnLTweetHMHS7DX9kO/vq2PWPc9vFNGoDQWgGb1mso5cYqHvPA0kLN2jQ3Pq64MIfl/5wpKUHH9r06EuS+qYXZ+27aAHruknKcAyFiV0TVi6w6I3zdYi+L2TE1gWHepS9elUDgmPa0HksB+wWHw2CIs/LD/7xuKxZ5EHWCYd6lL26VQRMo83fBIpU+hHTcLiD4uOBE1E8DuRl30WD9+tGGsWEwBZxUZuWIe9pmMcWQYblkaMXKTyEMOSxHphHOsVHZUb4Zoln7A04/wGYXHy+8J1ryMFWGqF2MXXsX9PH11zkziyZAKLTtX/JUNYCrPPojf+xj2nAv/ZcFTfn3DNkjoso675YRns4C8PKyzPVUWvevi4ph9vHYRoWJFgiRKRSjg37LwlN+zCsMKyqSr6lYePlW4bdP3aZynYyFLR2c0ZwXJXudsrDaukctfjpipYsm1vqO+vxNjBPyAsXuuGJxm0U82y33N1mGEZsawpliIcv6iOPbG9wMCSG7bs4PtmXnLD+gkLQrcvleuVNM8BN8BT5ephadgllbxt6fCzDsfNWkC73aGsLeu41uOuVS8aLHgwbiaCv0kT+bJcv0oa7YRn8H+0XJaXUQI3eYbFhGf3bMmBeMtIJVT2HD67bym/1+2NJN2eZwmVmcZnrVCCYJFg+fd5F+R8LQCIcqhMFZ/f6/AYw0ISoxv6RRVBli8Bsu3tLvudHk0YVmAmOgDjqr1edxY0/KsIPg8tT0q2CgKLj8xIfD3qOcRQAwGYkVLRhDvJKp4Td9VbNFjZ8TcMMDuOz+BXLRe3TlisSZTbriHbBCA5wqjHdyxjg+sGHpXdx1DfggVvKtlCmTHP35iDj6OQ72Nc9Gtq2hfWmyGHZRLPvXyDtnjWfveWmOBufobrsoW14FSc+nV5T8AZ3oMQvOvYBFymS9TAgrtQuIgLRXnCsqFgucNWoaj/g3LRkkpxiS1DFQWARy4LUbwL60iB8owtSBUJlkA7SLW50H73rxTGENO/p9P6McJwcUkVEpaoodFP2HoUYeku878/PmTLUUWExeQWfYZ0mcfIY6pj2tXAnoLJdVpP4o2NFEVRFEVRFEVRFEVR1BDqHwijzU4FRDh1AAAAAElFTkSuQmCC"') failed because the command exited with a non-zero code.

Pass {failOnNonZeroExit: false} to ignore exit code failures.

Information about the failure:
Code: null

Stderr:
Neither CUDA nor MPS are available - defaulting to CPU. Note: This module is much faster with a GPU.
[W NNPACK.cpp:61] Could not initialize NNPACK! Reason: Unsupported hardware.

https://on.cypress.io/exec

[shivamguys]

its showing Reason: Unsupported hardware. for you might be package issues with hardware

…

On Wed, Jul 24, 2024 at 9:14 PM rajkmm ***@***.***> wrote: Bro I am getting below error on m vm What should I do? image.png (view on web) <https://github.com/user-attachments/assets/b2f627a5-e99c-46f6-b41f-8bdcbf224824> CypressError: cy.exec('python3 irctc-captcha-solver/app.py "data:image/jpg;base64,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"') failed because the command exited with a non-zero code. Pass {failOnNonZeroExit: false} to ignore exit code failures. Information about the failure: Code: null Stderr: Neither CUDA nor MPS are available - defaulting to CPU. Note: This module is much faster with a GPU. [W NNPACK.cpp:61] Could not initialize NNPACK! Reason: Unsupported hardware. https://on.cypress.io/exec — Reply to this email directly, view it on GitHub <#1 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGAX65PGXXAERZS37HG2MK3ZN7DXFAVCNFSM6AAAAABLKWWPPWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMJTHE3DSNY> . You are receiving this because you were mentioned.Message ID: <shivamguys/irctc-cypress-automation/repo-discussions/1/comments/10139697@ github.com>

-- *Thanks* *Shivam Pandey*

[rajkmm]

Okay do I have to run any specific version for package which I installed?

[shivamguys]

i dont whats wrong in your system config... try searching on google for that particular thng

[rajkmm]

@shivamguys and @everyone

I found the way to run this on window, but we just have to enter the captcha hope this help

here is the link
https://github.com/rajkmm/irctc-cypress-automation#to-run-this-on-window-system-you-need-nodejs-and-python-in-your-system

To run this on Window system, you need Node.js And Python in your system.
Note

Due to low dependency in Python Environment, have to enter the catch manually while login and booking and other stuff works fine.

-You have to install Python and Node.js from their official website or from Microsoft store.(Latest version)
-Now download the repository from the GitHub and unzip it based on your location.

Edit the passenger and other details from the passenger_data.json below is the file location and save it.

irctc-cypress-automation-main\cypress\fixtures\passenger_data.json

To enter CAPTCHA manually, then change MANUAL_CAPTCHA to true in cypress.env.json

{
"USERNAME": "yourusername",
"PASSWORD": "yourpassword",
"MANUAL_CAPTCHA": false
}
Now Open CMD as administator.
Enter the below commond
python3 -m venv .venv # <---- This will create a Python Enviorment in your directoery.
.venv\Scripts\activate # <---- This will Activate Python Enviorment in your directoery.
image

Now locate to requirements.txt file from cmd image
Then run all requirements by pasting below command.
pip install -r requirements.txt # <---- Make Sure You Run This Command From Code Folder.
Check If Everything Works Fine....
This Would Print No base-64 String provided Which Means You Have Followed Correctly at this point.

python app.py ""
image

Now back from the directory by cd ..
image

Last Step That's It...........
npx cypress run --headed --no-exit # <---- Make Sure You Run This Command From Code Folder.
image

[saurabh4006]

Hi I am facing this error while doing it in Windows when I follow your process I am getting stuck on this step and I am unable to go forward please help @shivamguys @rajkmm

[sevilpatel]

Would be helpful if you drop a video tutorial on this.

[rajkmm]

Sure I Can try that @sevilpatel
@saurabh4006 this seems that you haven't installed Python to latest version just try to
Check the tool argparse latest version and download it... Also make sure you have a batter speed tp download requirements.
Also check with outside of environment and then download it see if work's.
Meanwhile I will check this....

[shivamguys]

Appreciate your efforts @rajkmm for helping out others 💯

[rajkmm]

Sure I Can try that @sevilpatel @saurabh4006 this seems that you haven't installed Python to latest version just try to Check the tool argparse latest version and download it... Also make sure you have a batter speed tp download requirements. Also check with outside of environment and then download it see if work's. Meanwhile I will check this....

I have a created a walkthrough for this without audio just to get understand the steps
Do let me know if still you face any issue...

video-project-4_.mp4

[shivamguys]

Do Leave a feedback after booking successfully a tatkal ticket

Quoting to everyone

[sevilpatel]

Does it also book normal ticket as well?

[sidhant-khamankar]

I booked 3 3A tatkal tickets today when only 6 tickets were available. Just make sure not to log in somewhere else in app/website at same time.

[shivamguys]

Thanks for your wonderful words and booking experience @sidhant-khamankar . Appreciate your efforts to write here 😌

[shivamguys]

@sidhant-khamankar can you confirm the ticket you booked was that redirected to paytm gateway right as I saw an issue reporting that Paytm has been removed or is not available in IRCTC

[sidhant-khamankar]

It did go through Paytm but few days back it went through Amazon pay. A check may be required probably to only click on paytm when both options are shown.

[sumitvshukla]

Bhai I am a Commerce student i just read this thread can you guys please help
i have just downloaded the code zip file, node v22.11.0 (LTS), Python 3.13.0
Now dont know what to do
Can you guyz please guide me with step by step process bcz
MUJHE KAL HI TICKET NIKALNI HAI

[rajkmm]

Bhai if you are here then you are not a commerce guy, Upar hamne video upload Kiya Hain steps by steps guide in window you can view it.
#1 (reply in thread)

Or you can go for latest run just in your GitHub account
#1

[HyperionW]

python3: can't open file '/home/runner/work/irctc-cypress-automation/irctc-cypress-automation/irctc-captcha-solver/app.py': [Errno 2] No such file or directory

I got the above error. Please help me to resolve this

[saurabh4006]

@rajkmm and @shivamguys No Base 64-string Provided is not printing instead of that I am getting this error please help me out

[sooryajth]

stop running app-server.py.execute this command cypress run --headed --no-exit

[annuji-creator]

bhai i am new to this github culture and as far i know you use linux i use windows can you provide me a road map to make it work in my system

[PraveenKumarpkm]

hi @shivamguys, @rajkmm

I have few questions, please help me out in this. I tested today but it wasn't during tatkal time it was way after just to be assured if it's working correctly, and it did but all tickets were waiting, I mean sure yeah I was way passed the time limit but I was just testing and it was mentioned that it only gonna book for confirm tickets but it tried booking waiting ticket. please let me know if it checks the option "book only if confirm ticket" but maybe because this option wasn't available when all tickets were already waiting.

Also, I read the above discussion that I need to perform the test 50 seconds before? When I used to book tatkal ticket I always login 3-4 minutes before because it doesn't let me login after that.

And one more thing, it doesn't wait for the tatkal time, as I am understanding it just keeps running so I need to run it just before like 50 seconds before? ** can I run it like before 3 minutes and it'll wait for the tatkal tickets to be available and then start booking or it doesn't work like this **

[sooryajth]

Easy Steps to Install irctc-cypress-automation in windows
Note: CAPTCHA needs to be done manually.

Download and install Python and Node.js from their official websites.
Download the irctc-cypress-automation-main ZIP file.
Open Command Prompt as Administrator.
Run the command:
python -m venv .venv
Activate the virtual environment:
.venv\Scripts\activate
Navigate to the irctc-cypress-automation-main folder. For example:
cd C:\Users\user\Downloads\irctc-cypress-automation-main\irctc-cypress-automation-main
Navigate to the irctc-captcha-solver folder:
cd irctc-captcha-solver
Install the requirements:
pip install -r requirements.txt
Run Cypress:
cypress run --headed --no-exit

Kindly let me know if you have any doubts.

[Abhishek2159]

Does not work during tatkal times

[ghost]

is it work on Mac os?

[hardikshahgit]

@shivamguys - Hey Shivam...I am getting the below error on cypress after i run the script...can you help?

[Thinkish30]

do you get the issue solved

[Rounit-1st]

Hey @shivamguys
Can we just send https request directly without relianing on frontend , from postman or some node script , aren't user authorization creditial fixed for a session , why did you make this automation script, did you try building that
I am thinking of building one myself if you ever tried it please tell what happens