MAixPy IDE + MAix AMIGO y i e l d i n g ImportError: cannot import name MIC_ARRAY #491
Description
su09-17-2023
ImportError: cannot import name MIC_ARRAY
MAix Amigo
(1.) Hi, there.
(2.) Using MAixPy IDE, receiving error code for MAix Amigo:
ImportError: cannot import name MIC_ARRAY
(3.) MAix AMIGO
(3a.) SP-MOD MicArray Module
(3b.) Connector: 10P 0.5mm FPC
(3c.) Sipeed MAix R6 + 1 Microphone Array Board
(3d.) Located inside the back of the developer board #2970, moved the switch to M1N instead of STM.
-
-
-
-
-
-
-
- { By the way, STM yields same results. } * * * * * * * *
-
-
-
-
-
-
(3e.) MAixPy IDE: Tools > Select Board > Sipeed Maixduino
(3f.) Will only run the code for “helloworld.py”, although the LCD image orientation is misaligned, upside down; the picture is smaller than the LCD screen; but image has mostly clear resolution without any noticeable lag, latency, delay.
(3g.) Receiving “ImportError: cannot import name MIC_ARRAY”
when attempting to run the code for:
ROUTINE Sound Source Localization
https://wiki.sipeed.com/soft/maixpy/en/develop_kit_board/module_microphone.html
andalsofor
AirPocket Soundman’s Sound Localizer
https://github.com/airpocket-soundman/SoundVisualizer/blob/main/src/mic_array_en_ver204.py
(3h.) Pin assignments used for MAix AMIGO
LED_CLK_GPIOHS28…….23
LED_DAT_GPIOHS27…….20
DAT 0…………….......……12
DAT 1……………..…..…….…9
DAT 2………………..…...……31
DAT 3………….……..……...7
WS……………..…....…..……19
BCK_SCK……...…..…………17
(4.) Would you list the correct pin assignments for the:
(4a.) MAix Amigo #2970 in the M1n position
(4b.) MAix Amigo #2970 in the STM position
(5.) Thanks.
(6.) Toodles!