[RISCV] Default to MicroOpBufferSize = 1 for scheduling purposes (llvm#126608)

This change introduces a default schedule model for the RISCV target
which leaves everything unchanged except the MicroOpBufferSize. The
default value of this flag in NoSched is 0. Both configurations
represent in order cores (i.e. no reorder window), the difference
between them comes down to whether heuristics other than latency are
allowed to apply. (Implementation details below)

I left the processor models which explicitly set MicroOpBufferSize=0
unchanged in this patch, but strongly suspect we should change those
too. Honestly, I think the LLVM wide default for this flag should be
changed, but don't have the energy to manage the updates for all
targets.

Implementation wise, the effect of this change is that schedule units
which are ready to run *except that* one of their predecessors may not
have completed yet are added to the Available list, not the Pending one.
The result of this is that it becomes possible to chose to schedule a
node before it's ready cycle if the heuristics prefer. This is
essentially chosing to insert a resource stall instead of e.g.
increasing register pressure.

Note that I was initially concerned there might be a correctness aspect
(as in some kind of exposed pipeline design), but the generic scheduler
doesn't seem to know how to insert noop instructions. Without that, a
program wouldn't be guaranteed to schedule on an exposed pipeline
depending on the program and schedule model in question.

The effect of this is that we sometimes prefer register pressure in
codegen results. This is mostly churn (or small wins) on scalar because
we have many more registers, but is of major importance on vector -
particularly high LMUL - because we effectively have many fewer
registers and the relative cost of spilling is much higher. This is a
significant improvement on high LMUL code quality for default rva23u
configurations - or any non -mcpu vector configuration for that matter.

Fixes llvm#107532

Author: preames

llvm/lib/Target/RISCV/RISCVProcessors.td

@@ -88,21 +88,30 @@ class RISCVTuneProcessorModel<string n,
 
 defvar GenericTuneFeatures = [TuneOptimizedNF2SegmentLoadStore];
 
+// Adjust the default cost model to enable all heuristics, not just latency
+// In particular, this enables register pressure heustics which are very
+// important for high LMUL vector code, and have little negative impact
+// on other configurations,
+def GenericModel : SchedMachineModel {
+  let MicroOpBufferSize = 1;
+  let CompleteModel = 0;
+}
+
 def GENERIC_RV32 : RISCVProcessorModel<"generic-rv32",
-                                       NoSchedModel,
+                                       GenericModel,
                                        [Feature32Bit,
                                         FeatureStdExtI],
                                        GenericTuneFeatures>,
                    GenericTuneInfo;
 def GENERIC_RV64 : RISCVProcessorModel<"generic-rv64",
-                                       NoSchedModel,
+                                       GenericModel,
                                        [Feature64Bit,
                                         FeatureStdExtI],
                                        GenericTuneFeatures>,
                    GenericTuneInfo;
 // Support generic for compatibility with other targets. The triple will be used
 // to change to the appropriate rv32/rv64 version.
-def GENERIC : RISCVTuneProcessorModel<"generic", NoSchedModel>, GenericTuneInfo;
+def GENERIC : RISCVTuneProcessorModel<"generic", GenericModel>, GenericTuneInfo;
 
 def MIPS_P8700 : RISCVProcessorModel<"mips-p8700",
                                      MIPSP8700Model,
@@ -496,7 +505,7 @@ def TENSTORRENT_ASCALON_D8 : RISCVProcessorModel<"tt-ascalon-d8",
                                                   TunePostRAScheduler]>;
 
 def VENTANA_VEYRON_V1 : RISCVProcessorModel<"veyron-v1",
-                                            NoSchedModel,
+                                            GenericModel,
                                             [Feature64Bit,
                                              FeatureStdExtI,
                                              FeatureStdExtZifencei,
@@ -556,7 +565,7 @@ def XIANGSHAN_NANHU : RISCVProcessorModel<"xiangshan-nanhu",
                                             TuneShiftedZExtWFusion]>;
 
 def SPACEMIT_X60 : RISCVProcessorModel<"spacemit-x60",
-                                       NoSchedModel,
+                                       GenericModel,
                                        !listconcat(RVA22S64Features,
                                        [FeatureStdExtV,
                                         FeatureStdExtSscofpmf,
@@ -581,7 +590,7 @@ def SPACEMIT_X60 : RISCVProcessorModel<"spacemit-x60",
 }
 
 def RP2350_HAZARD3 : RISCVProcessorModel<"rp2350-hazard3",
-                                         NoSchedModel,
+                                         GenericModel,
                                          [Feature32Bit,
                                           FeatureStdExtI,
                                           FeatureStdExtM,

llvm/test/CodeGen/RISCV/GlobalISel/add-imm.ll

@@ -212,30 +212,30 @@ define i64 @add64_accept(i64 %a) nounwind {
 define void @add32_reject() nounwind {
 ; RV32I-LABEL: add32_reject:
 ; RV32I:       # %bb.0:
-; RV32I-NEXT:    lui a0, %hi(ga)
-; RV32I-NEXT:    lui a1, %hi(gb)
-; RV32I-NEXT:    lw a2, %lo(ga)(a0)
-; RV32I-NEXT:    lw a3, %lo(gb)(a1)
-; RV32I-NEXT:    lui a4, 1
-; RV32I-NEXT:    addi a4, a4, -1096
-; RV32I-NEXT:    add a2, a2, a4
-; RV32I-NEXT:    add a3, a3, a4
-; RV32I-NEXT:    sw a2, %lo(ga)(a0)
-; RV32I-NEXT:    sw a3, %lo(gb)(a1)
+; RV32I-NEXT:    lui a0, 1
+; RV32I-NEXT:    lui a1, %hi(ga)
+; RV32I-NEXT:    lui a2, %hi(gb)
+; RV32I-NEXT:    lw a3, %lo(ga)(a1)
+; RV32I-NEXT:    lw a4, %lo(gb)(a2)
+; RV32I-NEXT:    addi a0, a0, -1096
+; RV32I-NEXT:    add a3, a3, a0
+; RV32I-NEXT:    add a0, a4, a0
+; RV32I-NEXT:    sw a3, %lo(ga)(a1)
+; RV32I-NEXT:    sw a0, %lo(gb)(a2)
 ; RV32I-NEXT:    ret
 ;
 ; RV64I-LABEL: add32_reject:
 ; RV64I:       # %bb.0:
-; RV64I-NEXT:    lui a0, %hi(ga)
-; RV64I-NEXT:    lui a1, %hi(gb)
-; RV64I-NEXT:    lw a2, %lo(ga)(a0)
-; RV64I-NEXT:    lw a3, %lo(gb)(a1)
-; RV64I-NEXT:    lui a4, 1
-; RV64I-NEXT:    addi a4, a4, -1096
-; RV64I-NEXT:    add a2, a2, a4
-; RV64I-NEXT:    add a3, a3, a4
-; RV64I-NEXT:    sw a2, %lo(ga)(a0)
-; RV64I-NEXT:    sw a3, %lo(gb)(a1)
+; RV64I-NEXT:    lui a0, 1
+; RV64I-NEXT:    lui a1, %hi(ga)
+; RV64I-NEXT:    lui a2, %hi(gb)
+; RV64I-NEXT:    lw a3, %lo(ga)(a1)
+; RV64I-NEXT:    lw a4, %lo(gb)(a2)
+; RV64I-NEXT:    addi a0, a0, -1096
+; RV64I-NEXT:    add a3, a3, a0
+; RV64I-NEXT:    add a0, a4, a0
+; RV64I-NEXT:    sw a3, %lo(ga)(a1)
+; RV64I-NEXT:    sw a0, %lo(gb)(a2)
 ; RV64I-NEXT:    ret
   %1 = load i32, ptr @ga, align 4
   %2 = load i32, ptr @gb, align 4