Wrong grid power and load power value for Deye 10kw - 1P

[misu1lica]

Hi,
Many thanks for your excellent work.
I I've been running an earlier version and I am measuring a value that is not correct when I delivered to the network:

• deye10kw Grid Power (grid_power_169) is of the same value cu deye10kw_grid_ct_power (grid_ct_power_172) and does not represent the value power delivered to the network;
• deye10kw_grid_ct_power (grid_ct_power_172) is slightly larger than Grid Power (grid_power_169) and does not represent the value power delivered to the network;

The correct value for red circle is 7.9kw-7.2kw=0.7kW (is not value grid_ct_power_172 or grid_power_169).
The correct value for yellow circle is 7.2kw.

For my Deye 10kW is another address for modbus? How can I change value from red circle?
Thanks M

[slipx06]

Hi. Have you defined a sensor for essential_power in your config.

[misu1lica]

Hi,
where can I put essential_power?

[slipx06]

Hi. Its defined under the entities in the card.

[misu1lica]

I solved the problem, grid_power_169 and grid_ct_power_172 had to be multiplied by 10.
Thanks.