Sync maximum drawdown to documentation

Author: softwareengineerprogrammer

docs/Fervo_Project_Cape-4.md

@@ -69,7 +69,7 @@ in source code for the full set of inputs.
 | Fracture Geometry             | 165.3 m × 165.3 m (Square) | Extrapolated from 30 million ft² fracture surface area per well per Fercho et al, 2025.                                                                                                                                                                                                                                                        |
 | Reservoir Volume              | 5,418,039,158 m³           | Calculated from fracture area (27,324.09 m²) × fracture separation (18 m) × targeted number of fractures per well (102)                                                                                                                                                                                                                        |
 | Water Loss Rate               | 15%                        | Water loss rate is conservatively estimated to be between 10 and 20%. Other estimates and some simulations may suggest a significantly lower water loss rate than this conservative estimate. See [Geothermal Mythbusting: Water Use and Impacts](https://fervoenergy.com/geothermal-mythbusting-water-use-and-impacts/) (Fervo Energy, 2025). |
-| Maximum Drawdown              | 0.015                      | Tuned to keep minimum net electricity generation ≥ 500 MWe and thermal breakthrough requiring redrilling occurring every 5–10 years                                                                                                                                                                                                            |
+| Maximum Drawdown              | 0.0153                     | Tuned to keep minimum net electricity generation ≥ 500 MWe and thermal breakthrough requiring redrilling occurring every 5–10 years                                                                                                                                                                                                            |
 | Reservoir Impedance           | 0.001565 GPa.s/m³          | Yields ~15% initial pumping power/net installed power                                                                                                                                                                                                                                                                                          |
 | Injection Temperature         | 53.6 ℃                     | Calibrated with GEOPHIRES model-calculated reinjection temperature (Beckers & McCabe, 2019). Close to upper bound of Project Red injection temperatures (75–125℉; 23.89–51.67℃) (Norbeck & Latimer, 2023).                                                                                                                                     |