Red boards ordered

Modify castellated 1x12 to larger diameter plated castellated holes. Panelize with route-out around castellated edges. Scoot Qwiic connector in to use that side of the board as the tab.

Author: NPoole

Hardware/Castellated.lbr

@@ -6,7 +6,7 @@
 <setting alwaysvectorfont="no"/>
 <setting verticaltext="up"/>
 </settings>
-<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<grid distance="1" unitdist="mm" unit="mm" style="lines" multiple="1" display="yes" altdistance="0.1" altunitdist="mm" altunit="mm"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="2" name="Route2" color="16" fill="1" visible="yes" active="yes"/>
@@ -1737,18 +1737,18 @@ Holes are offset 0.005", to hold pins in place during soldering.
 <vertex x="0.762" y="-0.8255"/>
 <vertex x="-1.27" y="-0.8255"/>
 </polygon>
-<pad name="12B" x="-1.27" y="27.94" drill="0.85"/>
-<pad name="11B" x="-1.27" y="25.4" drill="0.85"/>
-<pad name="10B" x="-1.27" y="22.86" drill="0.85"/>
-<pad name="9B" x="-1.27" y="20.32" drill="0.85"/>
-<pad name="8B" x="-1.27" y="17.78" drill="0.85"/>
-<pad name="7B" x="-1.27" y="15.24" drill="0.85"/>
-<pad name="6B" x="-1.27" y="12.7" drill="0.85"/>
-<pad name="5B" x="-1.27" y="10.16" drill="0.85"/>
-<pad name="4B" x="-1.27" y="7.62" drill="0.85"/>
-<pad name="3B" x="-1.27" y="5.08" drill="0.85"/>
-<pad name="2B" x="-1.27" y="2.54" drill="0.85"/>
-<pad name="1B" x="-1.27" y="0" drill="0.85"/>
+<pad name="12B" x="-1.57" y="27.94" drill="1.7" diameter="1.75"/>
+<pad name="11B" x="-1.57" y="25.4" drill="1.7" diameter="1.75"/>
+<pad name="10B" x="-1.57" y="22.86" drill="1.7" diameter="1.75"/>
+<pad name="9B" x="-1.57" y="20.32" drill="1.7" diameter="1.75"/>
+<pad name="8B" x="-1.57" y="17.78" drill="1.7" diameter="1.75"/>
+<pad name="7B" x="-1.57" y="15.24" drill="1.7" diameter="1.75"/>
+<pad name="6B" x="-1.57" y="12.7" drill="1.7" diameter="1.75"/>
+<pad name="5B" x="-1.57" y="10.16" drill="1.7" diameter="1.75"/>
+<pad name="4B" x="-1.57" y="7.62" drill="1.7" diameter="1.75"/>
+<pad name="3B" x="-1.57" y="5.08" drill="1.7" diameter="1.75"/>
+<pad name="2B" x="-1.57" y="2.54" drill="1.7" diameter="1.75"/>
+<pad name="1B" x="-1.57" y="0" drill="1.7" diameter="1.75"/>
 </package>
 <package name="PRO_MICRO_C">
 <wire x1="-8.89" y1="16.51" x2="-8.89" y2="-16.51" width="0.1524" layer="51"/>