add AP2127 1.8V vreg

Author: lewispg228

Symbols/SparkFun-Regulator.kicad_sym

@@ -60,6 +60,67 @@
       )
     )
   )
+  (symbol "AP2127-1.8" (pin_names (offset 0.254)) (in_bom yes) (on_board yes)
+    (property "Reference" "U3" (at 0 8.89 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Value" "AP2127-1.8" (at 0 6.35 0)
+      (effects (font (size 1.27 1.27)))
+    )
+    (property "Footprint" "SparkFun-Semiconductor-Standard:SOT23-5" (at 0 -11.43 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Datasheet" "https://www.diodes.com/assets/Datasheets/AP2127.pdf" (at 0 -13.97 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "PROD_ID" "VREG-14239" (at -1.27 -16.51 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "VMax" "6V" (at 0 -19.05 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Imax" "300mA" (at 0 -24.13 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "Iq" "60µA" (at 0 -21.59 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_keywords" "linear regulator ldo fixed positive" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_description" "300mA low dropout linear regulator, with enable pin, 2.5V-6V input voltage range, 1.8V fixed positive output, SOT-23-5" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (property "ki_fp_filters" "SOT?23?5*" (at 0 0 0)
+      (effects (font (size 1.27 1.27)) hide)
+    )
+    (symbol "AP2127-1.8_1_1"
+      (rectangle (start -5.08 4.445) (end 5.08 -5.08)
+        (stroke (width 0.254) (type default))
+        (fill (type background))
+      )
+      (pin power_in line (at -7.62 2.54 0) (length 2.54)
+        (name "VIN" (effects (font (size 1.27 1.27))))
+        (number "1" (effects (font (size 1.27 1.27))))
+      )
+      (pin power_in line (at 0 -7.62 90) (length 2.54)
+        (name "GND" (effects (font (size 1.27 1.27))))
+        (number "2" (effects (font (size 1.27 1.27))))
+      )
+      (pin input line (at -7.62 0 0) (length 2.54)
+        (name "EN" (effects (font (size 1.27 1.27))))
+        (number "3" (effects (font (size 1.27 1.27))))
+      )
+      (pin no_connect line (at 5.08 0 180) (length 2.54) hide
+        (name "NC" (effects (font (size 1.27 1.27))))
+        (number "4" (effects (font (size 1.27 1.27))))
+      )
+      (pin power_out line (at 7.62 2.54 180) (length 2.54)
+        (name "VOUT" (effects (font (size 1.27 1.27))))
+        (number "5" (effects (font (size 1.27 1.27))))
+      )
+    )
+  )
   (symbol "RT9080-3.3" (pin_names (offset 0.254)) (in_bom yes) (on_board yes)
     (property "Reference" "U3" (at 0 8.89 0)
       (effects (font (size 1.27 1.27)))