Fixes range setting in all examples, updates header with product links

Author: edspark

examples/example1_basic_readings/example1_basic_readings.ino

@@ -2,16 +2,29 @@
   example1-BasicReadings
 
   This example shows the basic settings and functions for retrieving accelerometer
-	data.
-	Please refer to the header file for more possible settings, found here:
-	..\SparkFun_KX13X_Arduino_Library\src\sfe_kx13x_defs.h
+	data. Other possible Range settings, depending on your accelerometer KX132 or KX134, are 
+	the following: 
+
+	SFE_KX132_RANGE2G 
+	SFE_KX132_RANGE4G 
+	SFE_KX132_RANGE8G 
+	SFE_KX132_RANGE16G
+										
+	SFE_KX134_RANGE8G 
+	SFE_KX134_RANGE16G
+	SFE_KX134_RANGE32G
+	SFE_KX134_RANGE64G
 
   Written by Elias Santistevan @ SparkFun Electronics, October 2022
 
-	Product:
+	Products:
 
+	SparkFun Triple Axis Accelerometer Breakout - KX132: 
 		https://www.sparkfun.com/products/17871
 
+	SparkFun Triple Axis Accelerometer Breakout - KX134: 
+		https://www.sparkfun.com/products/17589
+
   Repository:
 
 		https://github.com/sparkfun/SparkFun_KX13X_Arduino_Library
@@ -23,8 +36,8 @@
 #include <Wire.h>
 #include "SparkFun_KX13X.h"
 
-SparkFun_KX132 kxAccel; 
-// SparkFun_KX134 kxAccel; // For the KX134, uncomment this and comment line above
+//SparkFun_KX132 kxAccel; 
+SparkFun_KX134 kxAccel; // For the KX134, uncomment this and comment line above
 
 outputData myData;   // Struct for the accelerometer's data
 
@@ -59,7 +72,9 @@ void setup()
 	// "...regs.h" file which specify which can be changed when.
 	kxAccel.enableAccel(false); 
 
-  kxAccel.setRange(0x18);         // 16g Range
+  //kxAccel.setRange(SFE_KX132_RANGE16G);         // 16g Range
+  kxAccel.setRange(SFE_KX134_RANGE16G);         // 16g for the KX134
+
 	kxAccel.enableDataEngine();     // Enables the bit that indicates data is ready.
 	// kxAccel.setOutputDataRate(); // Default is 50Hz
 	kxAccel.enableAccel();          

examples/example2_interrupts/example2_interrupts.ino

@@ -77,7 +77,9 @@ void setup()
 	//kxAccel.setPinMode();		 // Change interrupt to active HIGH
 	//kxAccel.setPulseWidth(); // Change the length of a pulsed (non latched) interrupt
 
-  kxAccel.setRange(0x18);         // 16g Range
+  kxAccel.setRange(SFE_KX132_RANGE16G);         // 16g Range
+  //kxAccel.setRange(SFE_KX134_RANGE16G);        // 16g for the KX134
+
 	//kxAccel.setOutputDataRate();   // Default is 400Hz
 	kxAccel.enableAccel();          
 

examples/example3_buffer/example3_buffer.ino

@@ -4,15 +4,17 @@
   This example shows both how to setup the buffer but also how to route the buffer's 
 	interrupt to a physical interrupt pin. 
 
-	Please refer to the header file for more possible settings, found here:
-	..\SparkFun_KX13X_Arduino_Library\src\sfe_kx13x_defs.h
-
   Written by Elias Santistevan @ SparkFun Electronics, October 2022
 
-	Product:
+	Products:
 
+	SparkFun Triple Axis Accelerometer Breakout - KX132: 
 		https://www.sparkfun.com/products/17871
 
+	SparkFun Triple Axis Accelerometer Breakout - KX134: 
+		https://www.sparkfun.com/products/17589
+
+
   Repository:
 
 		https://github.com/sparkfun/SparkFun_KX13X_Arduino_Library
@@ -81,7 +83,9 @@ void setup()
 	//kxAccel.getSampleLevel();                //  Get the number of samples in the buffer. This number
 																						 //  Changes depending on the resolution, see datasheet for more info.
 
-  kxAccel.setRange(0x18);        //  16g Range
+  kxAccel.setRange(SFE_KX132_RANGE16G);         // 16g Range
+  //kxAccel.setRange(SFE_KX134_RANGE16G);        // 16g for the KX134
+
 	//kxAccel.setOutputDataRate(); //  Default is 50Hz
 	kxAccel.enableAccel();          
 

examples/example4_tap/example4_tap.ino

@@ -60,7 +60,9 @@ void setup()
 	// "...regs.h" file which specify which can be changed when.
 	kxAccel.enableAccel(false); 
 
-  kxAccel.setRange(0x18);                 //  16g Range
+  kxAccel.setRange(SFE_KX132_RANGE16G);         // 16g Range
+  //kxAccel.setRange(SFE_KX134_RANGE16G);         // 16g for the KX134
+
 	kxAccel.enableTapEngine();              //  Enable tap Engine
 	kxAccel.enableDirecTapInterupt();       //  This enables checking the direction of the interrupt
 	//kxAccel.setTapDataRate(uint8_t rate); //  Default is 400Hz

examples/example5_spi/example5_spi.ino

@@ -65,7 +65,9 @@ void setup()
 	// "...regs.h" file which specify which can be changed when.
 	kxAccel.enableAccel(false); 
 
-  kxAccel.setRange(0x18);         // 16g Range
+  kxAccel.setRange(SFE_KX132_RANGE16G);         // 16g Range
+  //kxAccel.setRange(SFE_KX134_RANGE16G);         // 16g for the KX134
+
 	kxAccel.enableDataEngine();     // Enables the bit that indicates data is ready.
 	// kxAccel.setOutputDataRate(); // Default is 50Hz
 	kxAccel.enableAccel();