Docs update

Author: nseidle

docs/SparkFun RTK Everywhere - PointPerfect Menu Device ID.png

@@ -17,13 +17,13 @@ During WiFi configuration, the RTK device will present a webpage that is viewabl
 
 To get into WiFi configuration follow these steps:
 
-1. Power on the RTK Express, Express Plus, or Facet.
-2. Once the device has started press the Setup button repeatedly until the *Config* menu is highlighted.
-3. The display will blink a WiFi icon indicating it is waiting for incoming connections.
+1. Power on the RTK Torch
+2. Once the device has started press the Power Button twice within 1 second (double tap).
+3. The display will beep twice indicating it is waiting for incoming connections.
 4. Connect to WiFi network named ‘RTK Config’.
 5. Open a browser (Chrome is preferred) and type **192.168.4.1** into the address bar.
 
-![Display showing IP address](img/Displays/SparkFun_RTK_Facet_-_Display_WiFi_Config.jpg)
+![Display showing IP address]()
 
 *Device ready for cellphone configuration*
 

docs/configure_with_wifi.md

@@ -4,6 +4,8 @@ Torch: ![Feature Supported](img/Icons/GreenDot.png)
 
 SparkFun RTK devices transmit full NMEA sentences over Bluetooth serial port profile (SPP) at 2Hz and 115200bps. This means that nearly any GIS application that can receive NMEA data over a serial port (almost all do) can be used with SparkFun RTK devices. As long as your end system can open a serial port over Bluetooth (also known as SPP) your system can retrieve industry-standard NMEA positional data. The following steps show how to connect an external tablet, or cell phone to the RTK device so that any serial port-based GIS application can be used.
 
+**Note**: BLE is also supported and can be used in place of Bluetooth SPP. See [Bluetooth Protocols](https://docs.sparkfun.com/SparkFun_RTK_Everywhere_Firmware/menu_system/#bluetooth-protocol) for more information.
+
 ## Android
 
 ![List of Bluetooth devices on Android](<img/QuickStart/SparkFun Torch - Available Devices.png>)