docs updates

Author: PaulZC

docs/configure_with_ethernet.md

@@ -4,7 +4,7 @@ Torch: ![Feature Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](im
 
 ![SparkFun RTK WiFi Configuration Interface](<img/WiFi Config/SparkFun RTK WiFi Config - Main Interface.png>)
 
-*SparkFun RTK WiFi Configuration Interface*
+*SparkFun RTK Ethernet Configuration Interface*
 
 During Ethernet configuration, the RTK device will present a webpage that is viewable from a desktop/laptop connected to the local network.
 
@@ -35,12 +35,14 @@ To get into Ethernet configuration follow these steps:
 
 ![List of files in file manager](<img/WiFi Config/SparkFun%20RTK%20WiFi%20Config%20File%20Manager.png>)
 
-On devices that support an external SD card, a file manager is shown if an SD card is detected. This is a handy way to download files to a local device (cell phone or laptop) as well as delete any unneeded files. The SD size and free space are shown. And files may be uploaded to the SD card if needed.
+On devices that support an external SD card, a file manager is shown if an SD card is detected. This is a handy way to download files to a local device (cell phone or laptop) as well as delete any unneeded files. The SD size and free space are shown. Files may be uploaded to the SD card if needed.
 
 Additionally, clicking on the top checkbox will select all files for easy removal of a large number of files.
 
 ## Saving and Exit
 
 ![Save and Exit buttons](<img/WiFi Config/SparkFun RTK WiFi Config - Save Steps.png>)
 
-Once settings are input, please press ‘Save Configuration’. This will validate any settings, show any errors that need adjustment, and send the settings to the unit. The page will remain active until the user presses ‘Exit to Rover Mode’ at which point the unit will exit WiFi configuration and reboot into standard Rover mode.
+Once settings are input, please press ‘Save Configuration’. This will validate any settings, show any errors that need adjustment, and send the settings to the unit. The page will remain active until the user presses ‘Exit and Reset’ at which point the unit will exit Ethernet configuration and return to whichever mode was selected in the **System Configuration** tab **System Initial State** drop-down (Base, Rover or NTP).
+
+It is also possible to exit Configure-Via-Ethernet mode by: clicking the Mode button on the front panel; or by opening the serial menu and selecting 'r'.

docs/configure_with_wifi.md

@@ -59,7 +59,7 @@ Note: Upon connecting, your phone may warn you that this WiFi network has no int
 
 *Connected to the RTK WiFi Setup Page*
 
-Clicking on the category 'carrot' will open or close that section. Clicking on an ‘i’ will give you a brief description of the options within that section.
+Clicking on the category tab will open or close that section. Clicking on an ‘i’ will give you a brief description of the options within that section.
 
 ![Firmware highlighted](<img/WiFi Config/SparkFun RTK WiFi Config - Header Firmware Version.png>)
 
@@ -71,12 +71,12 @@ Please note that the firmware for the RTK device and the firmware for the GNSS r
 
 ![List of files in file manager](<img/WiFi Config/SparkFun%20RTK%20WiFi%20Config%20File%20Manager.png>)
 
-On devices that support an external SD card, a file manager is shown if an SD card is detected. This is a handy way to download files to a local device (cell phone or laptop) as well as delete any unneeded files. The SD size and free space are shown. And files may be uploaded to the SD card if needed.
+On devices that support an external SD card, a file manager is shown if an SD card is detected. This is a handy way to download files to a local device (cell phone or laptop) as well as delete any unneeded files. The SD size and free space are shown. Files may be uploaded to the SD card if needed.
 
 Additionally, clicking on the top checkbox will select all files for easy removal of a large number of files.
 
 ## Saving and Exit
 
 ![Save and Exit buttons](<img/WiFi Config/SparkFun RTK WiFi Config - Save Steps.png>)
 
-Once settings are input, please press ‘Save Configuration’. This will validate any settings, show any errors that need adjustment, and send the settings to the unit. The page will remain active until the user presses ‘Exit to Rover Mode’ at which point the unit will exit WiFi configuration and return to standard Rover mode.
+Once settings are input, please press ‘Save Configuration’. This will validate any settings, show any errors that need adjustment, and send the settings to the unit. The page will remain active until the user presses ‘Exit and Reset’ at which point the unit will exit WiFi configuration and return to whichever mode was selected in the **System Configuration** tab **System Initial State** drop-down (Base, Rover or NTP).